Undergraduate
|
Undergraduate / Course Credits |
| The curriculum of each group is listed below. |
| Smart Manufacturing Group: Courses focus on the theory and practice of smart manufacturing, micro/nano-scale materials fabrication and analysis, nano-scale component processing, system integration and measurement. Automation Control Group: Courses emphasize in combining the theory and practice of automatic control, mechatronics, robotics, and automation of manufacturing system. Advanced Vehicle Group: Courses focus on vehicle engineering, automobile repair, diagnosis and maintenance, especially microcomputer controllers, and management of automobile factory. |
| First-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Sports Life (I), (II) | 1st, 2nd |
2 |
2 |
| Military Training (I), (II) | 1st, 2nd |
0 |
0 |
| Community Service |
1st, 2nd |
0 |
0 |
| English (I), (II) |
1st, 2nd |
3 |
3 |
| Chinese (I), (II) | 1st, 2nd |
3 |
3 |
| Calculus (I), (II) | 1st, 2nd |
3 |
3 |
| Physics (I), (II) | 1st, 2nd |
3 |
3 |
| Physical Experiment (I), (II) | 1st, 2nd |
1 |
1 |
| Engineering Materials | 2nd |
|
3 |
| Mechanical Drawing (I), (II) | 1st, 2nd |
1 |
1 |
| Mechanical Work Shop Practice (I), (II) | 1st, 2nd |
1 |
1 |
| Introduction to Computer | 1st |
2 |
|
| Electrical Engineering | 1st |
3 |
|
| First-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Industrial Safety and Sanitary |
1st |
2 |
|
| Computer Programming and Practice |
2nd |
|
3 |
| Fabrication Safety |
1st |
2 |
|
| Manufacturing |
2nd |
|
3 |
| Casting Technology |
2nd |
|
3 |
| Second-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| History (I), (II) |
1st, 2nd |
2 |
2 |
| Human Life Philosophy |
1st |
2 |
|
| Introduction to Art |
1st |
2 |
|
| Engineering Mathematics (I), (II) |
1st, 2nd |
3 |
3 |
| Machine shop Practice |
1st, 2nd |
1 |
1 |
| Applied Mechanics (Statics) |
1st |
3 |
|
| Engineering Thermodynamics |
2nd |
|
3 |
| Mechanism |
1st |
3 |
|
| Strength of Material |
2nd |
|
3 |
| Programmable Logic Controller and Applications |
2nd |
|
3 |
| Applied Electronics and Practice |
1st |
3 |
|
| Sports Life (III), (IV) |
1st, 2nd |
2 |
2 |
| Second-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Military Training (III), (IV) |
1st, 2nd |
1 |
1 |
| Heat treatment and Metallographic |
1st |
3 |
|
| Heat Treatment Practice |
2nd |
|
1 |
| Dynamics |
2nd |
|
3 |
| Computer Aided Manufacturing & Practical Training |
2nd |
|
2 |
| Anticorrosion technique |
1st |
3 |
|
| Numerical Control Machine Tool |
2nd |
|
3 |
| Engineering Statistics |
1st |
3 |
|
| Precision Measurement Practice |
2nd |
|
2 |
| Quality Management |
2nd |
|
3 |
| Human Resource Management |
1st |
3 |
|
| Engineering Economy |
1st |
3 |
|
| Mechanical Engineering Experiment |
2nd |
1 |
|
| Third-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Constitution (I), (II) |
1st, 2nd |
2 |
2 |
| Applied English |
1st |
2 |
|
| Introduction to Humanity |
2nd |
|
2 |
| English Proficiency Evaluation |
1st |
1 |
|
| Senior Project (I) |
2nd |
|
1 |
| Machine Design (I) |
1st |
3 |
|
| Fluid Mechanics |
1st |
3 |
|
| Automatic Control Systems |
2nd |
|
3 |
| Experiment of Automatic Control System |
2nd |
|
1 |
| Digital Logics |
2nd |
|
2 |
| Physical Education (V) |
1st |
0 |
|
| Third-year Elective Courses (I) | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Physical Education (VI) |
2nd |
|
1 |
| Thermal Engine |
1st |
3 |
|
| Mechanical Metallurgy |
2nd |
|
3 |
| Applied Engineering Mathematics |
1st |
3 |
|
| Hydraulics and Pneumatics |
2nd |
|
2 |
| Air conditioning and Refrigeration Technology |
2nd |
|
3 |
| Machine Design (II) |
2nd |
|
3 |
| Welding Technology |
1st |
3 |
|
| Third-year Elective Courses (II) | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Computer Program Design and Lab |
1st |
2 |
|
| Analysis and application for heat transfer |
2nd |
|
3 |
| Sensors and Control |
1st |
3 |
|
| Technology of Metal Cutting |
1st |
3 |
|
| Precision Machining Technology |
1st |
3 |
|
| Inverse Engineering Technology |
2nd |
|
3 |
| Predictive Maintenance Technology |
2nd |
|
3 |
| CAM Techniques Practice |
1st |
2 |
|
| Metal Forming Process |
1st |
3 |
|
| Fourth-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Applied Chinese |
1st |
2 |
|
| Selected topics in mechanical engineering |
2nd |
|
1 |
| Microprocessor and Lab. Practice |
1st |
3 |
|
| Senior Project (II) |
1st |
1 |
|
| Fourth-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Physical Education (VII)(VIII) |
1st, 2nd |
1 |
1 |
| Image Processing |
2nd |
|
3 |
| Advanced Mechanics of Materials |
1st |
3 |
|
| Computer Integrated Manufacturing |
1st |
3 |
|
| Flexible Manufacturing System |
2nd |
|
3 |
| Introduction to expert system |
2nd |
|
3 |
| Die design and manufacture |
1st |
3 |
|
| Application and Designs of Robotics |
2nd |
|
3 |
| The Application of computer interface |
1st |
3 |
|
| Nondestructive Inspection |
1st |
3 |
|
| Mechanism Design Techniques |
1st |
3 |
|
| Fuzzy control |
2nd |
|
3 |
| Powder Metallurgy |
1st |
3 |
|
| Mechatronics |
1st |
3 |
|
| Infrared Thermal Vision Techniques and Lab. Practice |
2nd |
|
3 |
| IC Packaging Equipment Maintenance |
1st |
3 |
|
| Rapid Prototyping and Mold Making |
1st |
3 |
|
| First-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Sports Life (I), (II) |
1st, 2nd |
2 |
2 |
| Military Training (I), (II) |
1st, 2nd |
0 |
0 |
| Community Service |
1st, 2nd |
0 |
0 |
| English (I), (II) |
1st, 2nd |
3 |
3 |
| Chinese (I), (II) |
1st, 2nd |
3 |
3 |
| Calculus (I), (II) |
1st, 2nd |
3 |
3 |
| Physics (I), (II) |
1st, 2nd |
3 |
3 |
| Physical Experiment (I), (II) |
1st, 2nd |
1 |
1 |
| Applied Mechanics |
1st |
3 |
|
| Fuel Injection System |
1st |
2 |
|
| Automobile Work Shop (I), (II) |
1st, 2nd |
1 |
1 |
| Introduction to Computer |
1st |
2 |
|
| Mechanism |
2nd |
|
3 |
| First-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Automobile Material |
1st |
3 |
|
| Automotive English |
1st |
2 |
|
| Customer Relationship |
1st |
2 |
|
| Body and Chassis |
1st |
2 |
|
| Indusial Japanese |
2nd |
|
3 |
| Computer Programming |
2nd |
|
2 |
| Electric Circuit |
2nd |
3 | |
| Second-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| History (I), (II) |
1st, 2nd |
2 |
2 |
| Human Life Philosophy |
1st |
2 |
|
| Introduction to Art |
1st |
2 |
|
| Engineering Mathematics (I), (II) |
1st, 2nd |
3 |
3 |
| Automotive Electronics |
1st |
3 |
|
| Strength of Material |
1st |
3 |
|
| Thermodynamics |
2nd |
|
3 |
| Automotive Electronics and Lab. Practice |
2nd |
|
3 |
| Mechanical Drawing |
2nd |
|
1 |
| Automobile Repair Practice (I), (II) |
1st, 2nd |
2 |
2 |
| Sports Life (III), (IV) |
1st, 2nd |
2 | 2 |
| Second-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Military Training (III), (IV) |
1st, 2nd |
1 |
1 |
| Chassis Engineering |
1st |
3 |
|
| Welding Technology |
1st |
3 |
|
| Engineering Dynamics |
2nd |
|
3 |
| Accounting |
1st |
3 |
|
| Fracture Analysis |
2nd |
|
3 |
| Automobile Air Conditioning |
2nd |
|
3 |
| Automobile New Equipment |
2nd |
|
3 |
| Computer Aided Drawing |
2nd |
|
2 |
| Quality Management |
2nd |
|
3 |
| Human Resource Management |
1st |
3 |
|
| Third-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Constitution (I), (II) |
1st, 2nd |
2 |
2 |
| Applied English |
1st |
2 |
|
| Introduction to Humanity |
2nd |
|
2 |
| English Proficiency Evaluation |
1st |
1 |
|
| Senior Project (I) |
2nd |
|
1 |
| Automobile Fabrication Process and Repair Techniques |
1st |
3 |
|
| Internal Combustion Engine |
2nd |
|
3 |
| Advanced Diagnostic Technology |
2nd |
|
1 |
| Physical Education (V) |
1st |
0 |
|
| Third-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Physical Education (VI) |
2nd |
|
1 |
| Applied Electronics |
1st |
3 |
|
| Fluid Mechanics |
1st |
3 |
|
| Applied Engineering Mathematics |
1st |
3 |
|
| Vehicle Dynamics |
1st |
3 |
|
| Air conditioning and Refrigeration Technology |
2nd |
|
3 |
| Computerized engine control circuits |
1st |
3 |
|
| Engineering Statistics |
1st |
3 |
|
| Principles of sensors and their applications |
1st |
2 |
|
| Heat Transfer |
2nd |
|
3 |
| Microprocessor |
2nd |
|
3 |
| Experimental Methods |
2nd |
|
3 |
| Computer Aided Manufacturing |
2nd |
|
3 |
| Automobile Parts Design |
2nd |
|
3 |
| Automatic Transmission |
2nd |
|
2 |
| Fourth-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Applied Chinese |
1st |
2 |
|
| Automatic Control Systems |
1st |
3 |
|
| Automotive Engineering |
2nd |
|
3 |
| Senior Project (II) |
1st |
1 |
|
| Fourth-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Physical Education (VII), (VIII) |
1st, 2nd |
1 |
1 |
| Marketing and Management |
1st |
3 |
|
| Advanced Mechanics of Materials |
1st |
3 |
|
| Alternative Fuels Engine |
1st |
3 |
|
| Automobile Design |
1st |
3 |
|
| Introduction to Expert System |
1st |
3 |
|
| Automobile Microprocessor and Sensor Technology and Lab Practice |
1st |
3 |
|
| The Techniques of Auto Body Repairing |
1st |
3 |
|
| Body Coating Technology |
1st |
3 |
|
| Microprocessor Interface Application |
2nd |
|
3 |
| Railway Vehicle |
2nd |
|
2 |
| Engineering Economy |
2nd |
|
3 |
| Introduction to Fuzzy Control |
2nd |
|
3 |
| Noise and Vibration of a Car |
2nd |
|
3 |
| Fuzzy Control |
2nd |
|
3 |
| Rapid Prototyping and Mold Making |
1st |
3 |
|
| First-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Sports Life (I), (II) | 1st, 2nd |
2 |
2 |
| Military Training (I), (II) | 1st, 2nd |
0 |
0 |
| Community Service |
1st, 2nd |
0 |
0 |
| English (I), (II) |
1st, 2nd |
3 |
3 |
| Chinese (I), (II) | 1st, 2nd |
3 |
3 |
| Calculus (I), (II) | 1st, 2nd |
3 |
3 |
| Physics (I), (II) | 1st, 2nd |
3 |
3 |
| Physical Experiment (I), (II) | 1st, 2nd |
1 |
1 |
| Engineering Materials | 2nd |
|
3 |
| Mechanical Drawing (I), (II) | 1st, 2nd |
1 |
1 |
| Mechanical Work Shop Practice (I), (II) | 1st, 2nd |
1 |
1 |
| Introduction to Computer | 1st |
2 |
|
| Electrical Engineering | 1st |
3 |
|
| First-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Industrial Safety and Sanitary |
1st |
2 |
|
| Computer Programming and Practice |
2nd |
|
3 |
| Fabrication Safety |
1st |
2 |
|
| Manufacturing |
2nd |
|
3 |
| Casting Technology |
2nd |
|
3 |
| Second-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| History (I), (II) |
1st, 2nd |
2 |
2 |
| Human Life Philosophy |
1st |
2 |
|
| Introduction to Art |
1st |
2 |
|
| Engineering Mathematics (I), (II) |
1st, 2nd |
3 |
3 |
| Machine shop Practice |
1st, 2nd |
1 |
1 |
| Applied Mechanics (Statics) |
1st |
3 |
|
| Engineering Thermodynamics |
2nd |
|
3 |
| Mechanism |
1st |
3 |
|
| Strength of Material |
2nd |
|
3 |
| Programmable Logic Controller and Applications |
2nd |
|
3 |
| Applied Electronics and Practice |
1st |
3 |
|
| Sports Life (III), (IV) |
1st, 2nd |
2 |
2 |
| Second-year Electivel Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Military Training (III), (IV) |
1st, 2nd |
1 |
1 |
| Heat treatment and Metallographic |
1st |
3 |
|
| Heat Treatment Practice |
2nd |
|
1 |
| Dynamics |
2nd |
|
3 |
| Computer Aided Manufacturing & Practical Training |
2nd |
|
2 |
| Anticorrosion technique |
1st |
3 |
|
| Numerical Control Machine Tool |
2nd |
|
3 |
| Engineering Statistics |
1st |
3 |
|
| Precision Measurement Practice |
2nd |
|
2 |
| Quality Management |
2nd |
|
3 |
| Human Resource Management |
1st |
3 |
|
| Engineering Economy |
1st |
3 |
|
| Mechanical Engineering Experiment |
2nd |
1 |
|
| Third-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Constitution (I), (II) |
1st, 2nd |
2 |
2 |
| Applied English |
1st |
2 |
|
| Introduction to Humanity |
2nd |
|
2 |
| English Proficiency Evaluation |
1st |
1 |
|
| Senior Project (I) |
2nd |
|
1 |
| Machine Design (I) |
1st |
3 |
|
| Fluid Mechanics |
1st |
3 |
|
| Automatic Control Systems |
2nd |
|
3 |
| Experiment of Automatic Control System |
2nd |
|
1 |
| Digital Logics |
2nd |
|
2 |
| Physical Education (V) |
1st |
0 |
|
| Third-year Elective Courses (I) | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Physical Education (VI) |
2nd |
|
1 |
| Thermal Engine |
1st |
3 |
|
| Mechanical Metallurgy |
2nd |
|
3 |
| Applied Engineering Mathematics |
1st |
3 |
|
| Hydraulics and Pneumatics |
2nd |
|
2 |
| Air conditioning and Refrigeration Technology |
2nd |
|
3 |
| Machine Design (II) |
2nd |
|
3 |
| Welding Technology |
1st |
3 |
|
| Third-year Elective Courses (II) | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Computer Program Design and Lab |
1st |
2 |
|
| Analysis and application for heat transfer |
2nd |
|
3 |
| Sensors and Control |
1st |
3 |
|
| Technology of Metal Cutting |
1st |
3 |
|
| Precision Machining Technology |
1st |
3 |
|
| Inverse Engineering Technology |
2nd |
|
3 |
| Predictive Maintenance Technology |
2nd |
|
3 |
| CAM Techniques Practice |
1st |
2 |
|
| Metal Forming Process |
1st |
3 |
|
| Fourth-year Required Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Applied Chinese |
1st |
2 |
|
| Selected topics in mechanical engineering |
2nd |
|
1 |
| Microprocessor and Lab. Practice |
1st |
3 |
|
| Senior Project (II) |
1st |
1 |
|
| Fourth-year Elective Courses | |||
|
Courses |
Semester |
Credits/ Hours |
|
| Physical Education (VII)(VIII) |
1st, 2nd |
1 |
1 |
| Image Processing |
2nd |
|
3 |
| Advanced Mechanics of Materials |
1st |
3 |
|
| Computer Integrated Manufacturing |
1st |
3 |
|
| Flexible Manufacturing System |
2nd |
|
3 |
| Introduction to expert system |
2nd |
|
3 |
| Die design and manufacture |
1st |
3 |
|
| Application and Designs of Robotics |
2nd |
|
3 |
| The Application of computer interface |
1st |
3 |
|
| Nondestructive Inspection |
1st |
3 |
|
| Mechanism Design Techniques |
1st |
3 |
|
| Fuzzy control |
2nd |
|
3 |
| Powder Metallurgy |
1st |
3 |
|
| Mechatronics |
1st |
3 |
|
| Infrared Thermal Vision Techniques and Lab. Practice |
2nd |
|
3 |
| IC Packaging Equipment Maintenance |
1st |
3 |
|
| Rapid Prototyping and Mold Making |
1st |
3 |
|
