Name

Hong-Chuong Tran

Title

Assistant Professor & Guidance and Counseling Division Director of International Foundation Program

Office

K202-4

Phone

886-6-2533131 Ext. 3521

Email

tranhongchuong@stust.edu.tw  

Webpage

 

Education

Ph.D., Department of Mechanical Engineering, National Cheng Kung University

Research Interests

Powder Bed Fusion Process, Metal Additive Manufacturing, Numerical Modeling

Laboratory

  

  Publications

Journal Papers

1.     Mirkoohi, Elham, Hong-Chuong Tran, Yu-Lung Lo, You-Cheng Chang, Hung-Yu Lin, and Steven Y. Liang. "Analytical mechanics modeling of residual stress in laser powder bed considering flow hardening and softening." The International Journal of Advanced Manufacturing Technology (2020): 1-14.

2.     Wang, Jen-Hung, Yu-Lung Lo, Hung-Yu Wang, and Hong-Chuong Tran. "Multi-objective optimization framework for five-pass wire-drawing process." The International Journal of Advanced Manufacturing Technology (2020): 1-15.

3.     Mirkoohi, Elham, Hong-Chuong Tran, Yu-Lung Lo, You-Cheng Chang, Hung-Yu Lin, and Steven Y. Liang. "Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition." Crystals 10, no. 4 (2020): 337.

4.     Chi-Guang Ren, Yu-Lung Lo, Hong-Chuong Tran, and Min-Hsun Lee, "Emissivity calibration method for pyrometer measurement of melting pool temperature in selective laser melting of stainless steel 316L," The International Journal of Advanced Manufacturing Technology, vol. 105, pp. 637-649, 2019.

5.     Trong-Nhan Le, Yu-Lung Lo, and Hong-Chuong Tran, "Multi-scale modeling of selective electron beam melting of Ti6Al4V titanium alloy," The International Journal of Advanced Manufacturing Technology, vol. 105, pp. 545-563, 2019.

6.     Lo, Yu-Lung, Bung-Yo Liu, and Hong-Chuong Tran, "Optimized hatch space selection in double-scanning track selective laser melting process," The International Journal of Advanced Manufacturing Technology, vol. 105, pp. 2989-3006, 2019.

7.     Hong-Chuong Tran and Yu-Lung Lo, "Systematic approach for determining optimal processing parameters to produce parts with high density in selective laser melting process," The International Journal of Advanced Manufacturing Technology, vol. 105, pp. 4443-4460, 2019.

8.     Hong-Chuong Tran and Yu-Lung Lo, “Heat transfer simulations of selective laser melting process based on volumetric heat source with powder size consideration,” Journal of Materials Processing Technology , vol. 255, pp. 411-425, 2018.

9.     Hong-Chuong Tran, Yu-Lung Lo, and Min-Hao Huang, “Analysis of Scattering and Absorption Characteristics of Metal Powder Layer for Selective Laser Sintering,” IEEE/ASME Transactions on Mechatronics, vol. 22, pp. 1807-1817, 2017.

 

Conference Papers

1.     Hong-Chuong Tran, Yu-Lung Lo and Trong-Nhan Le, “A Strategy to Determine the Optimal Parameters for Producing High Density Part in Selective Laser Melting Process,” Annual International Solid Freeform Fabrication Symposium- An Additive Manufacturing Conference, Austin, Texas, USA, August 2019.

2.     Trong-Nhan Le, Yu-Lung Lo, Hong-Chuong Tran, “Multi-scale Modeling of Selective Electron Beam Melting of Ti6Al4V Titanium Alloy,” Annual conference of the Society for Experimental Mechanics, Nevada, USA, June 2019.

3.     Yu-Lung Lo, Hong-Chuong Tran, Hung-Yu Lin, and You-Cheng Chang, "Residual stress verified by the distortion of additive manufacturing 3D part in multi-scale modeling approach," In The Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics 2019, p. 1009C1045. The Japan Society of Mechanical Engineers, 2019.

4.     Hong-Chuong Tran and Yu-Lung Lo, “A Strategy for Finding Optimal Parameters to Produce Parts with High Density in Selective Laser Melting Process,” 中國機械工程學會第三十五屆全國學術研討會論文集, 國立中正大學 嘉義縣民雄鄉.

5.     Yu-Lung Lo, Hong-Chuong Tran, Hung-Yu Lin and You-Cheng Chang, “Multi-scale simulation for fast prediction the distortion of AM-processed part,” The 22nd International Conference on Advances in Material & Processing Technologies, Taipei, Taiwan, October 2019.

6.     Yu-Lung Lo, Chi-Guang Ren, Hong-Chuong Tran, and Min-Hsun Lee, “Absolute Measurement of Melting Pool Temperature in Selective Laser Melting Process,” Asian Conference on Experimental Mechanics ( ACEM 2018), Xian Chian, October 11-15, 2018.

7.     Hong-Chuong Tran, Yu-Lung Lo, Venkatesh Ganesan, and Pang-Yu Liu, “Comprehensive Strategy for Finding Optimal Parameters to Produce Part with High Density in SLM Process,” 18th International Conference on Experiment Mechanics, Brussels, Belgium, July, 2018.

8.     Hong-Chuong Tran and Yu-Lung Lo, “A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool,” in Mechanics of Additive and Advanced Manufacturing, Volume 9, pp. 13-16, Springer, 2018.

9.     Hong-Chuong Tran and Yu-Lung Lo, “A Heat Transfer Simulation Model with New Volumetric Heat Source in Selective Laser Melting,” Asian Conference on Experimental Mechanics, Bali, Indonesia, Aug. 2017.

10.  Hong-Chuong Tran and Yu-Lung Lo, “Searching Optimal Parameters for Single Track in Selective Laser Melting by Using Heat Transfer Simulation,” International Symposium on Optomechatronic Technology, Tainan, Taiwan, September 2017.

11.  Hong-Chuong Tran, Yu-Lung Lo and Min-Hao Huang, “Analysis of Scattering and Absorption Characteristics of Metal Powder Layer for 3D printing process,” Asian Conference on Experimental Mechanics (ACEM),Jeju, South Korea, November, 2016.

12.  Hong-Chuong Tran, Yu-Lung Lo and Min-Hao Huang, “Analysis of Scattering and Absorption Characteristics of Metal Powder Layer for Selective Laser Sintering,” 中國機械工程學會105年度年會第33屆全國學術研討會, Hsinchu.

13.  Yu-Lung Lo, Hong-Chuong Tran, Min-Hao Huang, “Analysis of Scattering Characteristics on Metallic Powder Layer of Selective Laser Sintering by Speckle Imaging,” 中國工程機械學會104年度年會暨第32屆全國學術研討會, KaoShiung.

　

  Patents

1.    Yu-Lung Lo, Hong-Chuong Tran and Min-Hao Huang “Method of performing powder bed fusion process, 進行粉床熔融成型製程的方法”, I642536, Taiwan

2.     Yu-Lung Lo, Hong-Chuong Tran, National Cheng Kung University, 2020. Method of performing powder bed fusion process. U.S. Patent Application 16/568,271.

 

  Honors and Awards

  1. 105年度工程論文競賽機械組第二名─中國工程師學會學生分會 Hong-Chuong Tran, Yu-Lung Lo, and Min-Hao Huang,  “Analysis of scattering and absorption characteristics of metal powder layer for selective laser sintering,” Taipei, Taiwan, 2015.
  2. 2016台灣精密工程研討會論文發表，榮獲〈優秀論文〉 Hong-Chuong Tran, Yu-Lung Lo, and Min-Hao Huang, “Analysis of scattering and absorption characteristics of metal powder layer for selective laser sintering ,” Taipei, Taiwan, 2016.
  3. Silver medal in Spintech Thesis Award, 2017. Hong-Chuong Tran and Yu-Lung Lo, “New Volumetric Heat Source for 3D Selective Laser Melting System-Simulation and Experiment,” Taichung, Taiwan, 2017.
  4. 中華民國斐陶斐榮譽學會榮譽會員為前10 %畢業的研究生。