|
1.
|
朱志良、葉承政、陳泓錡, 三軸並聯式座標量測儀之結構設計與分析,
精密機械與製造科技期刊, Vol.10, No.1, pp. 43-54, 2020.
|
|
2.
|
Chih-Liang Chu, Hung-Chi Chen, The Structure Design and
Analysis of a Parallel Kinematic Mechanism Based on Abbe's Principle. IOP
Conf. Series: Materials Science and Engineering, v644, n1, 2019. (EI)
|
|
3.
|
Chih-Liang Chu, Hung-Chi Chen, Development of a Surface
Scanning Touch Probe for Micro-CMM, Institute of Electrical and Electronics
Engineers Inc., Article number 7988471, 2017. (EI)
|
|
4.
|
Chih-Liang Chu, Hung-Chi Chen, and Ming-Han Sie, Development
of a XYθz 3-DOF nanopositioning stage with linear displacement
amplification device. EDP Sciences, v 123, 2017. (EI)
|
|
5.
|
Chih-Liang Chu, Hung-Chi Chen, Development of an Auto-focus
3D Measurement System using Piezoelectric Actuator, Institute of Electrical
and Electronics Engineers Inc., Article number 7539886, 2016. (EI)
|
|
6.
|
Chih-Liang Chu, Hung-Chi Chen, Development of a micro-CMM
with five-axis scanning touch probe, Proceedings of SPIE, Vol. 9903, 2016.
(EI)
|
|
7.
|
朱志良、陳泓錡, 桌上型微細放電加工機之研製, 精密機械與製造科技期刊, Vol.5, No.2, pp. 1-7, 2015.
|
|
8.
|
Chih-Liang Chu, Hung-Chi Chen, Development of a single pulse
micro EDM system and to manufacture micro spherical probe used in micro
CMM, Key Engineering Materials, Vol. 661, pp. 16-21, 2015. (EI)
|
|
9.
|
Chih-Liang Chu, Kuan-Wen Lai, Hung-Chi Chen, Development of
a scanning touch probe with 5-axis measuring functions, Proceedings of
SPIE, Vol. 9446, 2015. (EI)
|
|
10.
|
Chih-Liang Chu, Chin-Tu Lu, Hung-Chi Chen, Jhih-Sian Ke,
Chao-Ming Chang, Development of a micro-CMM with scanning touch probe and
high-precision coplanar platform, Proceedings of SPIE, Vol. 8916, 2013. (EI)
|
|
11.
|
Yun-Hui Liu, Wei-Hao
Wu, Chih-Liang Chu, A three-degree-of-freedom hybrid vibration isolation
system adaptive proportional control supported by passive weight support
mechanism,
Proceedings of SPIE, Vol. 8916,
2013. (EI)
|
|
12.
|
Yih-Hwang Lin, Jui-Lung Chen, Chih-Liang Chu, and Yau-Kun Tsai , Numerical stability analysis for
independent modal vibration suppression of fluid-conveying pipe using a
piezoelectric inertia actuator,
Journal of Marine Science and Technology, Vol. 21, No. 5, pp.
545~550, 2013. (SCI)
|
|
13.
|
朱志良、陳泓錡、柯志憲, 三次元接觸式掃瞄探頭之研製, 科儀新知, Vol.34, No.6, pp. 19-30, 2013.
|
|
14.
|
Chih-Liang Chu, Jhih-Sian Ke, Hung-Chi Chen, Development of
a three dimensional scanning touch probe with high precision and low
contact force, Proceedings of SPIE,
Vol. 8759, 2013. (EI)
|
|
15.
|
Yun-Hui Liu, Wei-Hao
Wu, Chih-Liang Chu, Active vibration isolation by adaptive proportional
control, Proceedings of SPIE,
Vol. 8759, 2013. (EI)
|
|
16.
|
Chih-Liang Chu,
Tzu-Yao Tai, Yun-Hui Liu, Chin-Tu Lu, Chen-Hsin Chuang and Hong-Wei Liao,
Development of High-precision Micro CNC Machine with Three-dimensional
Measurement System, International Journal of automation and Smart
Technology, Vol. 2, No.2,
pp. 95~101, 2012
|
|
17.
|
Chih-Liang Chu, Yi-Lin Chen, Tzu-Yao Tai, Yun-Hui Liu,
Cheng-Hsin Chuang, Chin-Tu Lu, Development of a 3D touch trigger probe
using micro spherical stylus machining by micro-EDM for micro-CMM,
Proceedings
of SPIE, Vol. 8321, pp. 83213A-83213A-6, 2011. EI
|
|
18.
|
Chih-Liang Chu and Yu-Cheng Liu, Application of DVD
pick-up head for the vibration measurement of NB fan,
Proceedings
of SPIE, Vol. 7544, No. 754456, 2010/12, EI.
|
|
19.
|
Chih-Liang Chu and Cheng-Yu Wu, Development of 3D touch
trigger probe with real-time observation, Proceedings of SPIE, Vol.
7544, No. 75446G, 2010/12,EI.--->此篇論文的研究作品參加2009萬潤創新創意競賽 獲得最佳創意獎；參加第六屆上銀科技機械碩士論文獎獲得科技大學特別獎；參加2010第62屆德國紐倫堡國際發明展 獲得銀牌獎；參加2011第39屆瑞士日內瓦國際發明展獲得銀牌獎
|
|
20.
|
朱志良、劉育宏, 3D奈米量測的利器-奈米級微型三次元座標量測儀, 台灣奈米會刊第16期, pp. 46~55, 2009/4.
|
|
21.
|
Yu-Cheng Lin and Chih-Liang Chu,
Development of a low cost nanoscale stylus probe based on a DVD pick-up
head, Journal of the Chinese Society of Mechanical Engineers, Vol.
30, No. 1, pp. 25~31, 2009/2, SCI.----->此篇論文的研究作品參加第九屆TIC100科技創新競賽與2007年全國技專校院學生實務專題製作競賽 獲得獲創新計畫入圍獎與入圍獎
|
|
22.
|
Chih-Liang Chu and Hong-Wei Liao,
Development of a tri-axial optical accelerometer using two DVD pick-up
heads, Proceedings
of SPIE, Vol. 7130, No. 713034, 2008/12, EI.
|
|
23.
|
Chi-Feng Li and Chih-Liang Chu,
Development of a novel optical encoder based on two commercial DVD pick-up
heads, Proceedings
of SPIE, Vol. 7130, No. 713033, 2008/12, EI.----->此篇論文的研究作品參加2008年全國技專校院學生實務專題製作競賽
獲得佳作
|
|
24.
|
Chih-Liang Chu and Yu-Hung Liou,
Development of a low-cost micro-CMM with nanoscale touch trigger probe and
novel optical encoder, Journal of the Chinese Society of Mechanical
Engineers, Vol.
29, No. 6, pp. 467~474, 2008/12, SCI.----->此篇論文的研究作品參加第三屆龍騰微笑競賽
獲得百萬獎金(貳獎)
|
|
25.
|
Y.C. Liu, K.C. Fan, C.L. Chu, C.A.
Werner and G. Jäger, Development of an optical accelerometer for low
frequency vibration using the voice coil on a DVD pickup head, Measurement Science and
Technology, Vol. 19, pp. 1-7, 2008/08, SCI.
|
|
26.
|
C.L. Chu, C.Y. Chung, C.M. Tseng,
Y.C. Lin, C.F. Li and K.M. Yeh, Autofocusing system for optical microscope
based on DVD pick-up head, Key Engineering Materials, Vols. 381-382, pp. 321-322,
2008/06, EI.
|
|
27.
|
Chih-Liang Chu and Chen-Yu Chiu,
Development of a low cost nanoscale touch trigger probe based on two
commercial DVD pick-up heads, Measurement Science and Technology, Vol. 18, pp.
1831-1842, 2007/07, SCI.----->升等教授代表著作，與獲得Measurement Science
and Technology傑出論文獎的文章同為該年度被網路下載最多的前60名文章之一，此篇論文的研究作品參加2007年全國大專學生暨第五屆國立虎尾科技大學創新設計實作競賽, 獲得第三名＆最佳創意巧思獎
|
|
28.
|
Chih-Liang Chu, Bing-Song Wu and
Yih-Hwang Lin, An experimental study on active micro-vibration suppression
of a flexible beam mounted on an elastic base, Measurement Science and Technology,
Vol. 18, pp. 1823-1830, 2007/07, SCI.
|
|
29.
|
Chih-Liang Chu, Cha-Hao Lin,
Kuang-Chao Fan, Two-dimensional optical accelerometer based on commercial
DVD pick-up head, Measurement Science and Technology, Vol. 18, pp. 265- 274, 2007/01,
SCI.----->榮獲 英國皇家物理學會：量測科學與技術期刊
傑出論文獎 2007 Measurement Science and
Technology Outstanding Paper Award
|
|
30.
|
Hsiang-Chieh Yu, Yih-Hwang Lin,
and Chih-Liang Chu, Robust Modal Vibration Suppression of a Flexible Rotor,
Mechanical
Systems and Signal Processing, Vol. 21, pp. 334-347,
2007/01, SCI.
|
|
31.
|
Chih-Liang Chu, Bing-Song Wu, and
Yih-Hwang Lin, Active Vibration Control of a Flexible Beam Mounted on an
Elastic Base, Finite
Elements in Analysis and Design, Vol. 43, No. 1, pp. 59-67,
2006/11, SCI.
|
|
32.
|
Kuang-Chao Fan, Yi-Cheng Liu,
Chih-Liang Chu, Design Analysis of voice coil motor for active vibration
isolation, Journal of the Chinese
Society of Mechanical Engineers, Vol. 27, No. 5, pp. 501-506,
2006/10, EI.
|
|
33.
|
Chih-Liang Chu, Cha-Hao Lin,
Kuang-Chao Fan, Development of a two-dimensional optical accelerometer
using a DVD pick-up head, Proceedings of SPIE, Vol. 6280, No. 62801M,
2006/10, EI.
|
|
34.
|
Chih-Liang Chu and Sheng-Hao Fan,
A novel long-travel piezoelectric-driven linear nanopositioning stage, Precision Engineering: The Journal of the International Societies for Precision
Engineering and Nanotechnology, Vol.30, pp. 85-95, 2006/01, SCI.--->獲得[No. 4 (Jan-Mar
2006), No. 3 (Apr-Jun 2006), No. 7 (Jul-Sep 2006), No. 3 (Oct.-Dec. 2006),
No. 19 (Apr-Jun 2007), No. 14 (Oct.-Dec. 2007), No. 7 (Jan-Mar 2008), No.
16 (Apr-Jun 2008), No. 25 (Oct.-Dec. 2008), No. 22 (Jan-Mar 2009), No. 15
(Oct.-Dec. 2009), No. 10 (Jan-Mar 2010), No. 11 (Apr-Jun 2010), No.
13 (Jul-Sep 2010) of TOP 25 hottest (most downloaded) articles within the
journal--->此篇論文在該期刊五年內被引用次數第一名
|
|
35.
|
Chih-Liang Chu and Cha -Hao Lin,
Development of an Optical Accelerometer with a DVD Pick-up Head, Measurement Science and
Technology, Vol.16, pp. 2498-2502, 2005/12, SCI.----->升等副教授代表著作，此篇論文的研究作品(專利)參加97年國家發明創作獎 獲得發明金牌獎
|
|
36.
|
Chih-Liang Chu, Shyng-Her Lin, Zu-Yu Fu and Kung-Kun Yen,
The Development of an Optical Fiber Alignment and Fusion Machine, Proceedings of the 2005 IEEE International
Conference on Mechatronics, ICM '05, pp. 472-476, 2005, EI.----->此篇論文的研究作品參加精密產業機械教學資源中心競賽
獲得優良獎
|
|
37.
|
范光照、朱志良,長行程定位平台數位驅動控制器之研製, 中華民國自動化科技學會 2004 年 6 月份會刊, Vol. 4,No. 2, pp.9-15 2004/06.
|
|
38.
|
Y.H. Lin, R.C. Huang, and C.L.
Chu, Optimal Modal Vibration Suppression of a Fluid-Conveying Pipe with a
Divergent Mode, Journal
of Sound and Vibration, Vol. 271, pp. 577-597, 2004/04,
SCI.
|
|
39.
|
Chih-Liang Chu, Kuang-Chao Fan,
and Ye-Jing Chen, A compensation method for the hysteresis error of DVD
VCM, Measurement
Science and Technology, Vol. 15, pp. 734-740, 2004/04,
SCI.
|
|
40.
|
K.C. Fan, C.L. Chu, T.T. Chung,
Development of a Small Coordinate Measuring Machine with, Nanotechnology and
Precision Engineering, Vol. 1, No. 1, pp. 17-23, 2003/12,
EI.
|
|
41.
|
K.C. Fan, C.L. Chu, J. L. Liao and
J. I. Mou, Development of a High Precision Straightness Measuring System
with DVD Pick-up Head, Measurement Science and Technology, Vol. 14, pp. 47-54,
2003/01, SCI.
|
|
42.
|
范光照、鍾添東、張所鋐、朱志良, 奈米級三次元量測儀之研製, 機械月刊, Vol. 28, No. 12, pp. 34-42, 2002/12.
|
|
43.
|
K.C. Fan, C.L. Chu, and J. I. Mou,
Development of a Low-Cost Autofocusing Probe for Profile Measurement,
Measurement
Science and Technology, Vol.12, pp. 2137-2146, 2001,
SCI.----->獲得Measurement Science and Technology期刊2001年被網路下載最多的論文之一
|
|
44.
|
Yih-Hwang Lin and Chih-Liang Chu,
Active Model Control of Timoshenko Pipes Conveying, Journal of Chinese
Society of Mechanical Engineers, Vol. 24, No. 2, pp. 65-67,
2001, SCI.
|
|
45.
|
范光照、朱志良, 智慧型量測系統之技術與應用, 機械月刊, Vol. 27, No. 11, 2001/11.
|
|
46.
|
范光照、朱志良, 光學奈米級量測探頭及微觀尺寸機械特性技術與應用, 工研院量測資訊與2001精密儀器工業年鑑, 量測資訊, Vol.81, pp. 35-40. 2001/09.
|
|
47.
|
Lin, Y. H. and Chu , C. L., Active
Flutter control of a cantilever tube conveying fluid using piezoelectric
actuators, Journal
of Sound and Vibration, Vol. 196, No. 1, pp. 97-105,
1996, SCI.
|
|
48.
|
Chu , C. L. and Lin, Y. H., Finite
element analysis of fluid-conveying timoshenko pipes, Shock and Vibration, Vol.
2, No. 3, pp. 247-255, 1995, SCI .
|
|
49.
|
Lin, Y. H. and Chu , C. L.,
Numerical evaluation for stability and performance of an electronic damping
device for structural vibration control, Journal of Sound and Vibration, Vol.
184, No. 5, pp. 929-933, 1995, SCI.
|
|
50.
|
Lin, Y. H. and Chu , C. L., A new
design for independent modal space control of general dynamic systems, Journal of Sound and
Vibration, Vol. 180, No. 2, pp. 351-361, 1995,
SCI.
|
|
51.
|
Lin, Y. H. and Chu , C. L ., Comments on, “Active Modal Control of
Vortex-Induced Vibrations of a Flexible Cylinder,”
Journal of
Sound and Vibration, Vol. 175, No. 1, pp. 135-137, 1994,
SCI.
|
|
|
|
1.
|
Chih-Liang Chu, You-Wei Chen,
Development of 3-UPU Parallel Coordinate Measuring Machine with Abbe's
Principle. 4rd IEEE International Conference on Knowledge Innovation and
Invention 2021 (IEEE ICKII 2021), Taichung, Taiwan, 2021/7/23~25.
|
|
2.
|
Chih-Liang Chu, Kun-Shu Rao,
Structure Design and Analysis of a Portable Coordinate Measuring Machine.
The 6th International Conference on Precision Machinery and Manufacturing
Technology (ICPMMT 2021), Pingtung, Taiwan, 2021/5/21~23.
|
|
3.
|
朱志良、饒昆書, 高精度可攜式三次元量測儀之研製, 2021 PMMT第19屆精密機械與製造科技研討會, 台灣 屏東, 2021/05/21~23.
|
|
4.
|
朱志良、陳友維, 三軸並聯式座標量測儀之研製與量測軟體開發, 2021 PMMT第19屆精密機械與製造科技研討會, 台灣 屏東, 2021/05/21~23.
|
|
5.
|
Chih-Liang Chu, Cheng-Zheng Ye and
You-Wei Chen, Development of a small 3-axis Parallel Coordinate Measuring Machine
Based on Abbe's Principle. 3nd IEEE International Conference on Knowledge
Innovation and Invention 2020 (IEEE ICKII 2020), Kaohsiung, Taiwan, 2020/8/21~23.
|
|
6.
|
朱志良、葉承政、陳泓錡, 三軸並聯式座標量測儀之結構設計與分析, 2020 PMMT第18屆精密機械與製造科技研討會, 台灣 屏東, 2020/05/22~24.---->榮獲優等論文獎
|
|
7.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a High Precision Contact Measuring Probe for 3D
Measurements. 2019 International Symposium on Novel and Sustainable
Technology, Tainan, Taiwan, 2019/12/12~13. ---->榮獲Third Prize of
Poster Competition Award.
|
|
8.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a surface contact scanning probe using modular elastic
stylus. 2nd IEEE International Conference on Knowledge Innovation and
Invention 2019, Seoul, Korea, 2019/7/13~16. ---->榮獲Best Conference
Paper Award.
|
|
9.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a Parallel Coordinate Measuring Machine with contact and
non-contact probe. 2nd IEEE International Conference on Knowledge
Innovation and Invention 2019, Seoul, Korea, 2019/7/13~16.
|
|
10.
|
Chih-Liang Chu, Hung-Chi Chen, The
Structure Design and Analysis of a Parallel Kinematic Mechanism Based on
Abbe's principle. The 4th International Conference on Precision Machinery
and Manufacturing Technology (ICPMMT 2019), Pingtung, Taiwan, 2019/5/24~26.
|
|
11.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a Desktop CMM with Positioning Error Compensation System.
2018 International Symposium on Novel and Sustainable Technology, Tainan,
Taiwan,2018/10/4~5. ---->榮獲Excellent Award of Poster.
|
|
12.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of an Automatic Gauging Machine for Micro Components
Measurement. The 2018 International Conference on Engineering, Science and
Applications (ICESA 2018), Tokyo, Japan, 2018/8/22~24.
|
|
13.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a 6-DOF Positioning Error Compensation System of Linear
Positioning Stage. The 4thIEEE International Conference on Applied System
Innovation 2018 (IEEE ICASI 2018), Chiba, Tokyo, 2018/4/13~17.
|
|
14.
|
Chih-Liang Chu, Hung-Chi Chen, and
Ming-Han Sie, Development of a XYθz 3-DOF nanopositioning stage with linear
displacement amplification device, The 2st international conference on
precision machinery and manufacturing technology 2017, Kenting, Taiwan,
2017/05/19~21
|
|
15.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a High Precision Linear Motion Stage with Real-time Error
Compensation, 2017 International Symposium on Novel and Sustainable
Technology, Tainan,
Taiwan, 2017/10/19~20---->獲得First Prize of Poster Competition
Award
|
|
16.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of a Surface Scanning Touch Probe for Micro-CMM, 2017 IEEE
International Conference on Applied System Innovation, Sapporo, Japan,
2017/5/13~17---->獲得Best Conference Paper
Award
|
|
17.
|
Chih-Liang Chu, Hung-Chi Chen, and
Ming-Han Sie, Development of a Positioning Stage with Error Compensation
System, 2017 IEEE International Conference on Applied System Innovation,
Sapporo, Japan, 2017/5/13~17---->獲得Best
Conference Paper Award
|
|
18.
|
朱志良、陳泓錡、陳柏霖, 基於探棒前端感測接觸式掃描探頭之研製, 第11屆海峽兩岸計量學術研討會 CSMC 2016, 台灣 桃園,
2016/11/1~3
|
|
19.
|
Chih-Liang Chu, Hung-Chi Chen,
Ming-Han Sie, 5-DOF Nano-Positioning Stage with Error Compensation
System, 2016 International Symposium on Novel and Sustainable Technology, Tainan, Taiwan,
2016/10/6~7---->獲得Second
Prize of Poster Competition Award
|
|
20.
|
朱志良、謝明翰、陳泓錡, XYθ 三自由度微定位平台之結構設計與分析, 第二十四屆中華民國振動與噪音工程學術研討會,
台灣 高雄, 2016/06/25
|
|
21.
|
Chih-Liang Chu, Hung-Chi Chen,
Development of an Auto-focus 3D Measurement System using Piezoelectric
Actuator, 2016 International Conference on Applied System Innovation (ICASI
2016), Okinawa, Japan, 2016/5/28~6/1
|
|
22.
|
Chih-Liang Chu, Hung-Chi Chen, Development
of a Fast Scanning Touch Probe for Surface Measurement, 2016 International
Conference on Applied System Innovation (ICASI 2016), Okinawa, Japan,
2016/5/28~6/1---->獲得Best Conference Paper
Award
|
|
23.
|
朱志良、陳柏霖、陳泓錡, 具模組化探棒之接觸式掃描探頭的結構設計與分析, 2016 PMMT精密機械與製造科技研討會, 台灣
屏東, 2016/05/20~22
|
|
24.
|
Chih-Liang Chu, Hung-Chi Chen and
Cing-Yun Hsu, Autofocusing 3D measurement system with linear
nanopositioning function, 2015 International Symposium on Nano Science and
Technology, Tainan, Taiwan, 2015/10/30~31 ---->獲得Third Prize
of Poster Competition Award
|
|
25.
|
Chih-Liang Chu, Hung-Chi Chen, Development of a five-axis touch probe with
high-precision and rapid scanning, The 6th international conference of
asian society for precision engineering and nanotechnology (ASPEN 2015),
Harbin, China,
2015/08/15~20.
|
|
26.
|
Chih-Liang Chu, Hung-Chi Chen, Development of a micro-CMM
with five-axis scanning touch probe, The 7th
International Symposium on Precision Mechanical Measurements, ISPMM 2015,
Xiamen, Fujian, China, 2015/08/07~12.
|
|
27.
|
Chih-Liang Chu, Hung-Chi Chen, Development of a single pulse
micro EDM system and to manufacture micro spherical probe used in micro
CMM, The 1st international conference on precision machinery and
manufacturing technology 2015, Kenting, Taiwan, 2015/05/22~24
|
|
28.
|
朱志良、陳泓錡, 桌上型微細放電加工機之研製, 2015 PMMT精密機械與製造科技研討會, 台灣 屏東, 2015/05/22~24 ---->獲得特優論文獎(第一名)
|
|
29.
|
朱志良、賴冠文、陳泓錡, 具五軸量測功能之高精度接觸式掃瞄探頭的研製,2015兩岸量測與檢測科技學術研討會,台灣 中壢, 2015/03/20~21
|
|
30.
|
朱志良、賴冠文、陳泓錡, 具五軸量測功能之可攜式微型三次元量測儀的研製, 中國機械工程學會第三十一屆全國學術研討會,台灣 台中,2014/12/06~07
|
|
31.
|
朱志良、陳泓錡、許清雲, 具奈米直線定位之自動聚焦探頭研製應用於微元件3D量測, 第十八屆奈米工程暨微系統技術研討會, 台灣 台南, 2014/08/21~22
|
|
32.
|
Chih-Liang Chu, Kuan-Wen Lai, Hung-Chi Chen, Development of
a scanning touch probe with 5-axis measuring functions, 9th
International Symposium on Precision Engineering Measurements and
Instrumentation, ISPEMI 2014, Changsha, China, 2014/08/08~13.
|
|
33.
|
朱志良、朱子宏, 小型氣靜壓式定位平台之結構設計與分析, 2014 PMMT精密機械與製造科技研討會, 台灣 屏東, 2014/05/23~25
|
|
34.
|
朱志良、陳冠宇, 可攜式三次元之系統整合與量測軟體開發, 2014 PMMT精密機械與製造科技研討會, 台灣 屏東, 2014/05/23~25
|
|
35.
|
朱志良、賴冠文, 具五軸量測功能之掃瞄探頭的結構設計與分析, 2014 PMMT精密機械與製造科技研討會, 台灣 屏東, 2014/05/23~25
|
|
36.
|
朱志良、陳泓錡、許學文, 微細線放電研磨系統之研製, 中國機械工程學會第三十屆全國學術研討會,台灣 宜蘭,2013/12/06~07
|
|
37.
|
Chih-Liang Chu, Chin-Tu Lu, Tzu-Yao Tai, Yun-Hui Liu, Chen-Hsin Chuang, Hung-Chi Chen, Hong-Wei
Liao, Development of high-precision micro CNC machine with
three-dimensional measurement system and high-precision coplanar platform,
The 12th International Conference on Automation Technology, Yong-Kang,
Tainan, Taiwan, 2013/11/01~02.
|
|
38.
|
Chih-Liang Chu, Chin-Tu Lu, Hung-Chi Chen, Jhih-Sian Ke,
Chao-Ming Chang, Development of a micro-CMM with scanning touch probe and
high-precision coplanar platform, The Sixth International
Symposium on Precision Mechanical Measurements, ISPMM 2013, Guiyang, China,
2013/08/08~12.
|
|
39.
|
Yun-Hui Liu, Wei-Hao
Wu, Chih-Liang Chu, A three-degree-of-freedom hybrid vibration isolation
system adaptive proportional control supported by passive weight support mechanism, The
Sixth International Symposium on Precision Mechanical Measurements, ISPMM
2013, Guiyang, China, 2013/08/08~12.
|
|
40.
|
朱志良、許清雲, 具壓電感測之接觸式掃描探頭的研製, 2013 PMMT精密機械與製造科技研討會, 台灣 屏東, 2013/05/24~26
|
|
41.
|
朱志良、呂金塗、劉政良, 具有鎖緊裝置之共平面平台設計, 2013 PMMT精密機械與製造科技研討會, 台灣 屏東, 2013/05/24~26
|
|
42.
|
朱志良、許學文, 以田口方法應用於線放電研磨法之研究, 2013 PMMT精密機械與製造科技研討會, 台灣 屏東, 2013/05/24~26
|
|
43.
|
朱志良、廖鴻維、陳泓錡, 具三維線上量測之微型綜合加工機的研製, 2013海峽兩岸精密機械與儀器精度理論及應用學術研討會, 台灣 南投, 2013/01/19~20
|
|
44.
|
朱志良、陳泓錡, 微型綜合加工機之系統整合與精度測試, 中國機械工程學會第二十九屆全國學術研討會,台灣 高雄,2012/12/07~08
|
|
45.
|
Chih-Liang Chu, Chin-Tu Lu, Chao-Ming Chang , Development of
a high-precision coplanar platform with fine-tuning, The 5th International
Conference on Positioning Technology, Kaohsiung, Taiwan, 2012/11/14~16.
|
|
46
|
朱志良、柯志憲、陳泓錡, 三次元接觸式掃描探頭之研製, 第二十屆全國自動化科技研討會, 台灣 桃園, 2012/11/2~3. ---->獲得最佳論文獎
|
|
47.
|
朱志良、呂金塗、張詔銘, 具微調功能共平面平台之設計, 第十五屆全國機構與機器設計學術研討會, 台灣 台南, 2012/11/2.
|
|
48.
|
Chih-Liang Chu, Jhih-Sian Ke, Hung-Chi Chen, Development of
a three dimensional scanning touch probe with high precision and low
contact force, International Symposium on Precision
Engineering Measurements and Instrumentation, Chengdu, China, 2012/08/08~11.
|
|
49.
|
Yun-Hui Liu, Wei-Hao
Wu, Chih-Liang Chu, Active vibration isolation by adaptive proportional
control, International Symposium on Precision Engineering Measurements and
Instrumentation, Chengdu, China, 2012/08/08~11.
|
|
50.
|
朱志良、柯志憲, 三次元接觸式掃描探頭之結構設計與分析, 第二十屆中華民
振動與噪音工程學會學術研討會,台灣 彰化, 2012/06/16
|
|
51.
|
朱志良、黃雅君, 三自由度光學式振動量測探頭之研製與應用, 第二十屆中華民國振動與噪音工程學會學術研討會,台灣 彰化, 2012/06/16
|
|
52.
|
朱志良、張詔銘、呂金塗, 高精度微型CNC綜合加工機之結構設計與分析, 2012精密機械與製造科技研討會, 台灣 屏東, 2012/05/18~20
|
|
53.
|
朱志良、陳泓錡, 單脈衝放電系統之研製與放電間隙之研究, 2012精密機械與製造科技研討會, 台灣 屏東, 2012/05/18~20
|
|
54.
|
朱志良、鄭雅方, 具雷射聚焦探頭與二維影像量測功能之三維量測系統的研製, 中國機械工程學會第二十八屆全國學術研討會,台灣 台中,2011/12/10~11
|
|
55.
|
朱志良、陳奕霖、廖鴻維, 以放電迴路研製單發放電系統, 中國機械工程學會第二十八屆全國學術研討會,台灣 台中,2011/12/10~11
|
|
56.
|
Chih-Liang Chu, Ya-Fang Jheng, HongWei
Liao, Development of a non-contact probe for 3D profile measurement of
microstructure, 2011
International Symposium on Nano Science and Technology, Tainan,
Taiwan, 2011/11/18~19
|
|
57.
|
Chih-Liang Chu, Ya-Fang Jheng,
and Kuang-Chao Fan, Development of a Three-dimensional Measurement System
with Focus Laser Probe and Two-dimensional Image Measurement Functions, The
11th International Conference on Automation Technology, Douliou, Yunlin,
Taiwan, 2011/11/18~20
|
|
58.
|
Chih-Liang Chu, Tzu-Yao Tai,
Yun-Hui Liu, Chin-Tu Lu, Chen-Hsin Chuang, Hong-Wei Liao, Development of
High-precision Micro CNC Machine with Three-dimensional Measurement System,
The 11th International Conference on Automation Technology, Douliou,
Yunlin, Taiwan, 2011/11/18~20.
|
|
59.
|
Chih-Liang Chu, Yi-Lin Chen, Tzu-Yao Tai, Yun-Hui Liu,
Cheng-Hsin Chuang, Chin-Tu Lu, Development of a 3D touch trigger probe
using micro spherical stylus machining by micro-EDM for micro-CMM,
The 7th
International Symposium on Precision Engineering Measurements and
Instrumentation (ISPEMI 2011), Lijiang, Yunnan, China,
2011/08.
|
|
60.
|
徐維良、林益煌、朱志良、蔡耀坤, 輸送流體之懸臂管樑的數位最佳模態振動制抑, 2011第19屆振動與噪音工程學術研討會, 台灣 彰化, 2011/06.
----->獲得優良理論論文獎
|
|
61.
|
朱志良、陳奕霖, 具導電性球狀探針之三次元觸發式量測探頭的研製, 2011 精密機械與製造科技研討會, 台灣 屏東, 2011/05.
|
|
62.
|
朱志良、鄭雅方, 具雷射聚焦探頭與二維影像量測功能之三維量測系統的研製, 2011 精密機械與製造科技研討會, 台灣 屏東, 2011/05.
|
|
63.
|
Chih-Liang Chu and Yu-Cheng Liu, Application of DVD
pick-up head for the vibration measurement of NB fan, The 6th International
Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI
2010), Hangzhou, China, 2010/08.
|
|
64.
|
Chih-Liang Chu and Cheng-Yu Wu, Development of a 3D
touch trigger probe with real-time observation, The 6th International
Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI
2010), Hangzhou, China, 2010/08.
|
|
65.
|
朱志良、
陳炯男, 以DVD 雷射讀取頭應用於筆記型電腦風扇的振動量測, 2010 第十八屆全國自動化科技研討會, 台灣 中壢, 2010/06.
|
|
66.
|
朱志良、周鈺翔, 三軸奈米定位平台之設計與分析, 2010 精密機械與製造科技研討會, 台灣 屏東, 2010/05.
|
|
67.
|
朱志良、吳俊毅, 三次元量測探頭之結構動態分析, 2010 精密機械與製造科技研討會, 台灣 屏東, 2010/05.
|
|
68.
|
Chih-Liang Chu, Cheng-Yu Wu,
Development of a 3D touch trigger probe for micro/nano CMM with real-time
observation by network camera, 2009 International Symposium on Nano Science
and Technology, Tainan, Taiwan, 2009/11.
|
|
69.
|
Chih-Liang Chu, Hong-Wei Liao, A
study on the structure of a high precision three-dimensional accelerometer,
2009 International Symposium on Nano Science and Technology, Tainan,
Taiwan, 2009/11.
|
|
70.
|
朱志良、吳政育, 奈米級三維量測探頭之設計分析與實驗研究, 中國機械工程學會第二十六屆全國學術研討會, 台灣 台南, 2009/11.
|
|
71.
|
朱志良、吳政育, 以網路攝影機即時觀測之三次元量測探頭的研製, 2009精密機械與製造科技研討會, 台灣 屏東, 2009/05.
|
|
72.
|
朱志良, 劉育宏, 小型微/奈米級三次元量測儀之研製, 第七屆海峽兩岸先進製造技術研討會, 中國香港、深圳, 2008/12.
|
|
73.
|
Chi-Feng Li and Chih-Liang Chu,
Development of a novel optical encoder based on two commercial DVD pick-up
heads, The fourth International Symposium on Precision Mechanical
Measurements, ISPMM 2008, 2008/08, Anhui, China.
|
|
74.
|
Chih-Liang Chu and Hong-Wei Liao,
Development of a tri-axial optical accelerometer using two DVD pick-up
heads, The fourth International Symposium on Precision Mechanical
Measurements, ISPMM 2008, 2008/08, Anhui, China.
|
|
75.
|
Yu-Cheng Lin and Chih-Liang Chu,
Development of a low cost nanoscale stylus probe based on a DVD pick-up
head, The fourth International Symposium on Precision Mechanical
Measurements, ISPMM 2008, 2008/08, Anhui, China.
|
|
76.
|
Chih-Liang Chu and Yu-Hung Liou,
Development of a low-cost micro-CMM with nanoscale touch trigger probe and
novel optical encoder, The fourth International Symposium on Precision
Mechanical Measurements, ISPMM 2008, 2008/08, Anhui, China.
|
|
77.
|
范光照、劉一正、朱志良, 低成本之主動式振動隔振系統之研製, 第十六屆全國自動化科技研討會, 台灣 高雄, 2008/06.
|
|
78.
|
朱志良、廖鴻維, 高精度三軸向光學式加速度計之設計分析與實驗研究, 第十六屆全國自動化科技研討會, 台灣 高雄, 2008/06.
|
|
79.
|
朱志良、林佑整, 微奈米級三維形貌量測儀之研製, 中國機械工程學會第二十四屆全國學術研討會, 台灣 中壢, 2007/11.
|
|
80.
|
朱志良、李佶峰, 奈米級雙雷射聚焦讀取頭光學尺之研製, 中國機械工程學會第二十四屆全國學術研討會, 台灣 中壢, 2007/11.
|
|
81.
|
朱志良、劉育宏, 小型微/奈米級三次元量測儀之結構創新設計, 中國機械工程學會第二十四屆全國學術研討會, 台灣 中壢, 2007/11.
|
|
82.
|
朱志良、李佶峰, 創新型雷射光學尺之研製, 中國機械工程學會第二十四屆全國學術研討會, 台灣 中壢, 2007/11.
|
|
83.
|
Chih-Liang Chu, Yu-Hung Liou,
Development of a novel bridge structure for micro-CMM, 2007 International
Symposium on Nano Science and Technology, Tainan, Taiwan, 2007/11.
|
|
84.
|
Chih-Liang Chu, Chi-Feng Li,
Development of a novel optical encoder with nanometer resolution, 2007
International Symposium on Nano Science and Technology, Tainan, Taiwan,
2007/11.
|
|
85.
|
Y.C. Liu, K.C. Fan, C.L. Chu, C.A.
Werner and G. Jäger, Development of an optical accelerometer for low
frequency vibration using DVD pickup head, 8th International Symposium on
Measurement Technology and Intelligent Instruments (ISMTII2007), Sendai,
Japan, 2007/09.
|
|
86.
|
C.L. Chu, C.Y. Chung, C.M. Tseng,
Y.C. Lin, C.F. Li and K.M. Yeh, Autofocusing system for optical microscope
based on DVD pick-up head, 8th International Symposium on Measurement
Technology and Intelligent Instruments (ISMTII2007), Sendai, Japan,
2007/09.
|
|
87.
|
朱志良、廖鴻維, 三軸向光學式加速度計之研製, 第十五屆中華民國振動與噪音工程學術研討會, 台灣 台北, 2007/06.
|
|
88.
|
朱志良、李佶峰, 奈米級三自由度光學量測探頭與三次元接觸式量測探頭之研製, 中國機械工程學會第二十三屆全國學術研討會, 台灣 台南, 2006/11.
|
|
89.
|
朱志良、邱偵祐, 奈米級三次元接觸式量測探頭之研製, 第五屆全國精密製造學術研討會SME2006, 台灣 高雄, 2006/11.
|
|
90.
|
Chih-Liang Chu, Yu-Cheng Lin,
Three-dimensional stylus profilometer with micro/nano-accuracy, 2006
International Symposium on Nano Science and Technology, Tainan, Taiwan,
2006/11.
|
|
91.
|
Chih-Liang Chu, Chen-Yu Chiu,
Three-dimensional nano touch trigger probe with optical sensor,
International Symposium on Advanced Technology (ISAT-3st:Nanotechnology
& its Related Sciences), Tainan, Taiwan, 2006/11.
|
|
92.
|
朱志良、鄭嘉文, 微奈米級三次元量測儀之系統整合與量測軟體開發, 2006兩岸機電暨產學合作學術研討會, 台灣 新竹, 2006/11.
|
|
93.
|
Kuang-Chao Fan, Yi-Cheng Liu,
Chih-Liang Chu, Design Analysis of voice coil motor for active vibration
isolation, The Third International Symposium on Precision Mechanical
Measurements, ISPMM 2006, Urumqi, China, 2006/08 .
|
|
94.
|
Chih-Liang Chu, Cha-Hao Lin,
Kuang-Chao Fan, Development of a two-dimensional optical accelerometer
using a DVD pick-up head, The Third International Symposium on Precision
Mechanical Measurements, ISPMM 2006, Urumqi, China, 2006/08 .
|
|
95.
|
范光照、劉一正、朱志良, 音圈馬達於主動振動隔振器之應用, 第十四屆中華民國振動與噪音工程學術研討會, 台灣 宜蘭, 2006/06.
|
|
96.
|
林益煌、王義文、朱志良, 輸送流體管樑之最佳附加阻尼分析, 第十四屆中華民國振動與噪音工程學術研討會, 台灣 宜蘭, 2006/06.
|
|
97.
|
林益煌、陳瑞龍、朱志良, 應用壓電慣性制動器於輸送流體之懸臂樑的振動控制, 第十四屆中華民國振動與噪音工程學術研討會, 台灣 宜蘭, 2006/06.
|
|
98.
|
朱志良、邱偵祐, 具光學感測之三維微觸發探頭的研製, 第四屆精密機械與製造技術研討會, 台灣 屏東, 2006/05.
|
|
99.
|
朱志良、林益煌、吳秉松, 應用靜態縮減法及模態觀測器於彈性邊界樑的主動振動控制與實驗, 第二十九屆中華民國力學學會年會暨全國力學會議, , 台灣 新竹, 2005/12.
|
|
100.
|
朱志良、林家豪, 雙軸向光學式加速度計之研製, 第二十二屆全國機械工程研討會, 台灣 中壢, 2005/11.
|
|
101.
|
朱志良、林家豪, 光學式加速度計之研製, 第二十二屆全國機械工程研討會, 台灣 中壢, 2005/11.
|
|
102.
|
Tung-Yung Huang, Song-Chi Chiang,
and Chih-Liang Chu, A moving nano-precision stage capable of sub-millimeter
stroke, 2005 International Symposium on Nano Science and Technology,
Tainan, Taiwan, 2005/11.
|
|
103.
|
Deng-Maw Lu, Shyng-Her Lin and
Chih-Liang Chu, A moving nano-precision stage capable of sub-millimeter
stroke, 2005 International Symposium on Nano Science and Technology,
Tainan, Taiwan, 2005/11.
|
|
104.
|
Chih-Liang Chu, Shyng-Her Lin,
Zu-Yu Fu and Kung-Kun Yen, The development of an optical fiber alignment
and fusion machine, 2005 IEEE International Conference on Mechatronics
(2005 IEEE ICM/HIMA), Tainan, Taipei, 2005/07 .
|
|
105.
|
朱志良、林家豪, 應用於微細撓性樑振動分析之光學量測系統的研製, 第十三屆中華民國振動與噪音工程學術研討會, 台灣 彰化, 2005/06.
|
|
106.
|
朱志良、林益煌、吳秉松, 具彈性邊界的撓性樑於基底振動上之最佳化獨立模態控制實驗, 第十三屆中華民國振動與噪音工程學術研討會, 台灣 彰化,2005/06.
|
|
107.
|
李文琪、林益煌、蔡耀坤、游祥杰、朱志良, 磁浮轉子系統之適應振動控制, 第十三屆中華民國振動與噪音工程學術研討會, 2112-2119, 台灣 彰化, 2005/06.
|
|
108.
|
朱志良、吳秉松、林益煌, 固定於彈性基底之撓性樑的主動振動控制, 第二十八屆中華民國力學學會年會暨全國力學會議, 台灣 台北, 2004/12.
|
|
109.
|
C. L. Chu, S. H. Fan, A Novel
Long-Travel Piezoelectric-Driven Nanopositioning Stage, 2004 International
Symposium on Nano Science and Technology, , Tainan, Taiwan, 2004/11.
|
|
110.
|
C. L. Chu, B. S. Wu, Active
Vibration Control of a Flexible Beam for Applications in Ultra Precision
Measurement Probe, 2004 International Symposium on Nano Science and
Technology, 5453-5458, , Tainan, Taiwan, 2004/11.
|
|
111.
|
朱志良、范盛豪, 具直線位移之新型長行程奈米定位平台, 第二十一屆全國機械工程研討會, 台灣 高雄, 2004/11.
|
|
112.
|
Chih-Liang Chu, Kuang-Chao Fan and
Yejing Chen, Design of a Digital Controller for Long-stroke Submicron
Positioning Stage, The 1st International Conference on Positioning
Technology, Hamamatsu, Japan, 2004/06.
|
|
113.
|
林益煌、張峻榮、朱志良, 輸送流體管樑之最佳化設計, 第十二屆中華民國振動與噪音工程學術研討會, 台灣 台北, 2004/06 .
|
|
114.
|
朱志良、林祥和、嚴拱昆, 自動光纖對接機開發之研究, 2004中華民國自動控制研討會, 台灣 彰化, 2004/03.
|
|
115.
|
朱志良、范盛豪, 奈米定位平台之研製, 第二十七屆全國力學研討會論文集, 台灣 台南, 2003/12.
|
|
116.
|
朱志良、范光照、簡揚昌, 壓電長行程定位平台驅動控制器之研製, 第三屆精密機械製造研討會, 2003/11.
|
|
117.
|
C. L. Chu, S. H. Fan, Design and
Analysis of a Linear Displacement Amplification Device for Nanopositioning
Stage, 2003 International Symposium on Nano Science and Technology, ,
Tainan, Taiwan, 2003/11.
|
|
118.
|
C. L. Chu, S. H. Fan, Design and
Fabrication of a Piezodriven Nanopositioning Stage, 2003 International
Symposium on Nano Science and Technology, , Tainan, Taiwan, 2003/11.
|
|
119.
|
朱志良、范盛豪, 奈米線性定位裝置之設計與分析, 第二十屆全國機械工程研討會, 台灣 台北, 2003/11.
|
|
120.
|
游祥杰、朱志良、林益煌, 撓性轉子系統之主動振動控制, The 11th National Conference on the Society of Sound and
Vibration, 台灣 基隆, 2003/07.
|
|
121.
|
范光照、朱志良、陳柏廷, 光學自動聚焦探頭之非線性系統研究, 中華民國力學學會第二十六屆學術研討會, 台灣 虎尾, 2002/12.
|
|
122.
|
范光照、朱志良、陳柏廷, 超精密光學自動聚焦探頭之研製, 中國機械工程學會第十九屆學術研討會, 台灣 虎尾, 2002/10.
|
|
123.
|
K.C. Fan, C.L. Chu, An Autofocusing
Probe for Profile Measurement, ISMTII’2001, The Fifth
International Symposium on Measurement Technology and Intelligent
Instruments, Cairo, Egypt, 2001.
|
|
124.
|
范光照、朱志良、林威自, 超精密光學聚焦探頭的研製, 第二屆海峽兩岸製造技術研討會, pp. 136-145, 中國
大連, 2001/09.
|
|
125.
|
K.C. Fan, C.L. Chu, S.H. Chang and
T.T. Chung, Development of a Micro-CMM for Nanometrology, Keynote Paper, Proceedings
of the Spring Conference, KSPE,
Korea, pp. 3-7, 2001/05.
|
|
126.
|
范光照、朱志良、鄭森勵, 數位溫度計之研製, 中華民國計量工程學會第八屆計量學術研討會, 台灣 虎尾, 2001.
|
|
127.
|
范光照、朱志良、廖展漣, 精密雷射準直儀之研製, 第 12 屆全國自動化科技研討會, 台灣 虎尾, 2001/05.
|
|
128.
|
K.C. Fan and C.L. Chu, Developing
of a DSP Based Framework for Intelligent Instrumentation, Proceeding of the
6th International Conference on Automation Technology, , Tainan, Taipei,
2000/05.
|
|
129.
|
Lin, Y. H. and Chu, C. L., Active
vibration control of a cantilever pipe transporting fluid, Proceeding of
The eighteenth National Conference on Theoretical and Applied Mechanics,
109-116, 1994.
|
|
130.
|
Lin, Y. H. and Chu, C. L, Active
vibration suppression of timoshenko beams conveying fluid, Proceeding of
The Tenth National Conference of The Chinese Society of Mechanical
Engineers, 727-735, 1993.
|
|
131.
|
Chu, C. L. and Lin, Y. H., Dynamic
analysis of beam structures conveying continuous moving mass, Proceeding of
The Tenth National Conference of The Chinese Society of Mechanical
Engineers, 699-707, 1993.
|
|
.jpg){kind=link}
