|
1.
Mahmoud
Z. Ibrahim, T. Y. Kuo, Ahmed A. D. Sarhan, Farazila Yusuf, M. Hamdi, C. S.
Chien, S. A. Adeleke, 2018/4, “Hardness enhancement of Fe-based amorphous
laser cladded on Nickel-free stainless steel for biomedical implant
application”, Optics and Lasers in Engineering, to be submitted. (2018/4)
(IF:4.416)
2.
T.Y.
Kuo, *C.S. Chien, C.W. Liu, T.M. Lee, 2018/4, “Effects of the addition ZrO2
and Al2O3 in FA coating on in vitro biomedical properties of laser-clad
composite coatings on Ti6Al4V substrates”, Proceedings of the Institution
of Mechanical Engineers, Part H, Journal of Engineering in Medicine.,
accept. (2018/4) (IF:1.005)
3.
Mahmoud
Z. Ibrahim, Ahmed A. D. Sarhan, M. O. Shaikh, T. Y. Kuo, Farazila Yusuf, M.
Hamdi, 2018/8, “Investigate the Effects of the Laser Cladding Parameters on
the Microstructure, Phases Formation, Mechanical and Corrosion Properties
of Metallic Glasses Coatings for Biomedical Implant Application”, Additive
Manufacturing of Emerging Materials (book), Springer, pp 299-323.
4.
Mahmoud
Z. Ibrahim, Ahmed A. D. Sarhan, T. Y. Kuo*, Farazila Yusuf, M. Hamdi**, C.
S. Chien, 2018/6, “Investigate the Effects of the Substrate Surface
Roughness on the Geometry, Phase transformation, and hardness of Laser
Cladded Fe-Based Metallic Glass Coating”, The International Journal of
Advanced Manufacturing Technology,
https://doi.org/10.1007/s00170-018-2354-6. (Corresponding author)
(IF:2.209)
5.
H.C.
Lin, C.A. Hsu, C.S. Lee, T.Y. Kuo*, S.L. Jeng, 2018/1, “Effects of zinc layer thickness on
resistance spot welding for galvanized mild steel”, Journal of Materials Processing
Technology, Vol. 251, 205-213. (SCI) (Rank:6/44, ENGINEERING, IDUSTRIAL)
(Corresponding author). (IF:3.147)
6.
J.W.
Shih, K.W. Kuo, J.C. Kuo*, T.Y. Kuo, 2017/6, “Effects of accelerating
voltage and specimen thickness on spatial resolution of transmission
electron backscatter diffraction in Cu”, Ultramicroscopy, Vol.177,
pp.43-52. Cite: 1, (SCI)(Rank:1/10, MICROSCOPY) (IF:2.843)
7.
C.S.
Chien, Y.C. Hung, T.F. Hong, C.C. Wu, *T.Y. Kuo, T.M. Lee, T.Y. Liao, H.C.
Lin, C.H. Chuang, 2017/3, “Preparation and
characterization of porous bioceramic layers on pure titanium surfaces
obtained by micro-arc oxidation process”, Applied Physics A,
Vol.123, no. 3, article 204. Cite: 2, (SCI) (Rank:94/148, PHYSICS, APPLIED)
(Corresponding author). (IF:1.455)
8.
T.F.
Hong, L.M. Fu, B.S. Wu, K.Y. Lin, H.K. Lin, T.Y. Kuo, 2016/7, “Biomimetic
Coatings on Fiber Laser Modified Ti-6Al-4V Surfaces”,
Journal of Laser Micro/Nanoengineering, Vol. 11, no. 2, pp.147-152. (SCI)
(Rank:75/92, OPTICS) (IF:0.767)
9.
C.S.
Chien, C.W. Liu, *T.Y. Kuo, 2016/5, “Effects of laser power
level on microstructural properties and phase composition of laser-clad
fluorapatite/zirconia composite coatings on Ti6Al4V substrates”,
Materials, Vol. 9, no. 5. pp.1-14. Cite: 3, (SCI)(Rank:82/275, MATERIALS
SCIENCE, MULTIDISCIPLINARY) (Corresponding author). (IF:2.654)
10.
C.S.
Chien, C.W. Liu, *T.Y. Kuo, C.C. Wu, T.F. Hong, 2016/4, “Bioactivity
of fluorapatite/alumina composite coatings deposited on Ti6Al4V substrates
by laser cladding”, Applied Physics A, Vol.
122, no. 4, article 303 . Cite: 3, (SCI) (Rank:94/148, PHYSICS, APPLIED)
(Corresponding author). (IF:1.455)
11.
S.L.
Jeng, H.T. Lee, T.Y. Kuo, K. C. Tsai, C. L. Chung, J. Y. Huang, 2015/12, “The
effects of Mn and Nb on the microstructure and mechanical properties of
Alloy 152 welds”, Materials & Design, Vol.87,
pp.920-931. Cite: 6, (SCI) (Rank:46/275, MATERIALS SCIENCE,
MULTIDISCIPLINARY) (IF:4.364)
12.
C.S.
Chien, Y.S. Ke, *T.Y. Kuo, T.Y. Liao, H.C. Lin, T.M. Lee, 2015/6, “Surface
properties and in vitro bioactivity of fluorapatite / TiO2 coatings
deposited on Ti substrates by Nd:YAG laser cladding”,
Journal of Medical and Biological Engineering. Vol. 35, pp.357-366. Cite:
3, (SCI) (Rank:62/77, ENGINEERING, BIOMEDICAL) (Corresponding author).
(IF:0.989)
13.
C.S.
Chien, *T.Y. Kuo, C.W. Liu, H.C. Lin, T.Y. Liao, T.F. Hong and T.M. Lee,
2015/5, “Comparison of microstructure and
chemical composition of hydroxyapatite and fluorapatitecoatings deposited
on Ti-6Al-4V substrates by Nd-YAG laser”, Materials Research
Innovations, 19, S5-1318~1322. (SCI) (Rank:201/261, MATERIALS SCIENCE,
MULTIDISCIPLINARY) (Corresponding author). (IF:0.830)
14.
C.S.
Chien,T.Y. Huang, T.Y. Liao, *T.Y. Kuo and T.M. Lee, 2014/12, “Design
and Evaluation of the Application of Auxiliary Solar Power in
Manual/Electric Wheelchairs”, Journal of
Rehabilitation Research & Development, 51(9), 1411-1425. Cite: 3, (SCI)
(Rank:37/65, REHABILITATION) (Corresponding author). (IF:1.277)
15.
E.
W. Huang, C.S. Tsao, M.H. Wen, T.Y. Kuo, S.Y. Tu, B.W. Wu, C.J. Su, U.S.
Jeng, 2014, “Resolution of Structural
Transformation of Intermediates in Al-Cu Alloys during Non-isothermal
Precipitation”, Journal of Materials Research.
Vol. 29, pp.874-879. Cite: 4, (SCI) (Rank:151/275, MATERIALS SCIENCE, MULTIDISCIPLINARY).
(IF:1.673)
16.
C.S.
Chien, T.Y. Liao, T.F. Hong, *T.Y. Kuo, C.H. Chang, M.L. Yeh and T.M. Lee,
2014, “Surface microstructure and
bioactivity of hydroxyapatite and fluorapatite coatings deposited on
Ti-6Al-4V substrates using Nd-YAG laser”, Journal of Medical and
Biological Engineering. Vol. 34, pp.109-115. Cite: 15, (SCI) (Rank:62/77,
ENGINEERING, BIOMEDICAL) (Corresponding author) (IF:0.989)(2014 outstanding
paper)
17.
C.S.
Chien, Y.S. Ke, *T.Y. Kuo, T.Y. Liao, T.M. Lee and T.F. Hong, 2014, “Effect
of TiO2 addition on surface microstructure and bioactivity of fluorapatite
coatings deposited using Nd:YAG laser”, Proceedings of the
Institution of Mechanical Engineers, Part H, Journal of Engineering in
Medicine. Vol. 228, pp.379-387. Cite: 3, (SCI) (Rank:61/77, ENGINEERING,
BIOMEDICAL) (Corresponding author)(IF:1.005)
18.
C.S.
Tsao, E.W Huang, M.H. Wen, T.Y. Kuo, S.L. Jeng, U.S. Jeng and Y.S. Sun,
2013, “Phase transformation and
precipitation of an Al-Cu alloy during non-isothermal heating studied by in
situ small-angle and wide-angle scattering”, Journal of Alloys and
Compounds, Vol. 579, pp. 138-146. Cite: 9, (SCI) (Rank:5/74, METALLURGR
& METALLUGICAL ENGINEERING) (IF:3.133)
19.
C.S.
Chien, Y.S. Ke, *T.Y. Kuo, T.Y. Liao, T.F. Hong and T.M. Lee, 2011, “In
vitro bioactivity test of FA added with TiO2 of different phases coated on
Ti-6Al-4V substrates by Nd-YAG laser cladding process”,
Advanced Materials Research, Vols. 287-290, pp. 2225-2229. (EI)
(Corresponding author)
20.
*T.Y.
Kuo, H.C. Lin, T.Y. Liao, C.H. Kuo and T.J. Han, 2011, “Taguchi
method for 304 Stainless Steel Nd-YAG Laser Beam Welding”,
Advanced Materials Research Vols. 287-290, pp. 3112-3115. (EI)
21.
C.S.
Chien, T.Y. Liao, T.F. Hong, T.Y. Kuo, J.L. Wu and T.M. Lee, 2011, “Investigation
into microstructural properties of fluorapatite Nd-YAG laser clad coatings
with PVA and WG binders”, Surface and Coatings
Technology, Vol.205, pp.3141-3146. (SCI) (Corresponding author)(IF:2.199)
22.
C.S.
Chien, T.F. Hong, T.J. Han, T.Y. Kuo and T.Y. Liao, 2011, “Effects
of different adhesive of hydroxyapatite power on microstructure and
compounds of cladding layer by Nd-YAG deposition on Ti-6Al-4V substrate”,
Applied Surface Science, Vol.257, pp.2387-2393. (SCI) (Corresponding
author)(IF:2.538)
23.
H.C.
Lin, T.Y. Kuo, W.L. Tsai and J.S. Ku, 2010, “Comparison of
Microstructure and Hardness of Friction Stir Welding and Electron Beam
Welding AA7075-T6 Specimens”, Journal of the Chinese
Society of Mechanical Engineers, Vol.31, No.5, pp.425-433. (SCI)
(Corresponding author)(IF:0.161)
24.
Yong-Ding
Lin, Hwa-Teng Lee, Tsung-Yuan Kuo, Sheng-Long Jeng and Jia-Lin Wu, 2010, “Effects
of beam offset on mechanical properties and corrosion resistance of Alloy
690–SUS 304L EBW joints for Nuclear
Power Plant”, Journal of Nuclear Materials,
Vol.401, pp.78-85. (SCI) (IF:2.016)
25.
C.S.
Chien, T.J. Han, T.F. Hong, T.Y. Kuo and T.Y. Liao, 2009, “Effects
of different adhesive of hydroxyapatite power on weld morphology, Ca/P
value and hardness of cladding layer by Nd-YAG deposition on Ti-6Al-4V
substrate”, Materials Transactions, vol.50,
no.12, pp.2852-2857. (SCI). (Corresponding author)(IF:0.611)
26.
H.C.
Lin, *T.Y. Kuo, C.C. Lin, 2009, “Prestrain and Aging
Treatment to Improve the Mechanical Properties of AA6022 Aluminum Alloy
Laser Weldment”, Metallurgical and Materials
Transactions A, vol. 40A, pp.2578-2589. (SCI). (Corresponding
author)(IF:1.730)
27.
C.
F. Lin, C. C. Wu, P. H. Yang, T. T. Kuo, 2009, “Application
of Taguchi method in Light-emitting Diode Backlight Design for Wide Color
Gamut Displays,” IEEE/OSA, Journal of Display
Technology, vol. 5, Issue 8, pp323-330. (SCI)(IF:1.688)
28.
H.C.
Lin, T.Y. Kuo, H.T. Lee, 2009, “Pop-In
Crack Propagation Monitoring for AA2024-T3 Ductile Alloy”, Materials Transactions, vol.50,
no.02, pp.313-320. (SCI)(Corresponding author)(IF:0.611)
29.
Yong-Ding
Lin, Hwa-Teng Lee and Tsung-Yuan Kuo, 2008, “Effects of beam offset on
mechanical properties and corrosion resistance of Alloy 690-SUS 304L EBW
joints for nuclear power plant”, accepted, Journal of Nuclear Materials.
(SCI)
30.
Hwa-Teng
Lee, Yong-Ding Lin, Tsung-Yuan Kuo and Sheng-Long Jeng, 2007, “Precipitated
Phases and Corrosion Behavior in the Dissimilar Alloy 690-SUS 304L Joints
Formed by EBW and GTAW”, Materials Transactions, vol.48, no.06,
pp.1538-1547. (SCI)
31.
Tsung-Yuan,
Kuo, Yen-Tsun, Lin, 2007, “Effects of the nature of shielding gas and the
powerform on penetration characteristics and porosity formation of high
viscosity alloy laser welding”, Materials Transactions, vol. 48, no. 02,
pp.219-226. (SCI)
32.
Cheng-Si
Tsao, C.-Y. Chen, U.-S. Jeng, T.Y. Kuo, 2006, “Precipitation kinetics and
transformation of metastable phases in Al-Mg-Si alloys”, Acta Materialia,
vol. 54, pp.4621-4631 (SCI)
33.
T.Y.
Kuo, Y. S. Lin, 2006, “Effects of shielding gas flow
rate and power waveform on Nd-YAG laser welding of 5754-O aluminum alloy”,
Materials Transactions, vol.47, no.05, pp.1365-1373. (SCI)
34.
T.Y.
Kuo, H.C. Lin, 2006 “Effects of Pulse Level of Nd-YAG Laser on Tensile
Properties and Formability of Laser Weldments in Automotive Aluminum
Alloys”, Materials Science and Engineering A, A416, pp.281-289. (SCI)
35.
C.-S.
Tsao, U.-S. Jeng, C.-Y. Chen, T.-Y. Kuo, 2005, “Small-angle X-ray
scattering study of nanostructure evolution of β’’ precipitates in Al–Mg–Si
alloy”, Scripta Materialia, vol. 53, pp.1241-1245. (SCI)
36.
T.Y.
Kuo, 2005, “Effect of Pulsed and Continuous Nd-YAG Laser Beam Waves on the
Welding of Inconel Alloy”, Science and Technology of Welding and Joining,
vol.10, pp.557-565. (SCI)
37.
S.L.
Jeng, H.T. Lee, W. P. Rehbach, T.Y. Kuo, T.E. Weirich, J.P. Mayer, 2005,
“Effects of Nb on the Microstructure and Corrosion Property in the Alloy
690 - SUS 304L Weldment”, Materials Science and Engineering A, A397,
pp.229-238, 2005. (SCI)
38.
T.Y.
Kuo and S.L. Jeng, 2005, “Porosity Reduction in Nd-YAG Laser Welding of
Stainless Steel and Inconel Alloys by Plused Wave”, Journal of Physical D:
Appl. Phys., vol.38, pp.722-728. (SCI)
39.
T.Y.
Kuo, H. S. Lin and H. T .Lee, 2005 “Fracture and Thermomechanical Behavior
of the Alloys AA2024 of T3 and T81 Temper Designations by Center Crack
Tensile Test”, Materials Science and Engineering A, vo.l394, pp.28-35.
(SCI)
40.
H.T.
Lee, S.L. Jeng, C.H. Yen, T.Y. Kuo, 2004, “Dissimilar Welding of
Nickel-Based Alloys 690 to SUS 304L with Ti Addition”, Journal of Nuclear
Materials, Vol.335, pp.59-69. (SCI)
41.
H.T
.Lee, S.L. Jeng and T.Y. Kuo, 2003, “The Microstructure and Fracture
Behavior of the Dissimilar Alloy 690-SUS 304L Joint with Various Nb
Addition”, Metallurgical and Materials Transactions A, Vol.34A,
pp.1097–1105. (SCI)
42.
C.S.
Tsao, C.Y. Chen, T.Y. Kuo, T.L. Lin, M.S. Yu, 2003, “Size Distribution and
Coarsening Kinetics of δ‘ Precipitates in Al-Li Alloys Considering
Temperature and Concentration Dependence”, Materials Science and
Engineering A, A363, pp.228-233. (SCI)
43.
T.Y.
Kuo, H.T .Lee and C.C. Tu, 2003, “Evaluation of Effects of Niobium and
Manganese Addition on Nickel Base Weldments”, Science and Technology of
Welding and Joining, Vol.8, No.1, pp.39-48. (SCI)
44.
T.Y.
Kuo and H.T. Lee, 2002, ”Effects of Filler Metal Composition on Joining
Properties of Inconel Alloy Weldments”, Materials Science and Engineering
A, A338, pp.202-212. (SCI)
45.
H.T.
Lee, G.H. Ghaue and T.Y. Kuo, 2000, “The Study between the Fracture
Behavior and the Thermomechanical Effect of Aluminum Alloy 2024-T3 by TPB
Cracked Test”, Journal of the Chinese Society of Mechanical Engineers,
Vol.21, No.3, pp.293-301. (EI)
46.
H.T.
Lee and T.Y. Kuo, 1999, “Analysis of Microstructure and Mechanical
Properties for Alloy 690 Weldments Using Filler Metals I-82 and I-52”,
Science and Technology of Welding and Joining, Vol.4, No.2, pp.94–103.
(SCI)
47.
H.T.
Lee and T.Y. Kuo, 1999, “Effects of Nb on the Microstructure, Mechanical
Properties and Corrosion Behavior in Weldments of Alloy 690’, Science and
Technology of Welding and Joining, Vol.4, No.4, pp.246–256. (SCI)
48.
H.T.
Lee, T.Y. Kuo, C.J. Tu, D.C. Yeh and S.L. Jeng, 1999, ”Microstructural
Aspects and Mechanical Properties of Alloy 690 Weldments Using I-52 and
I-152 Weld Metals”, Journal of the Chinese Society of Mechanical Engineers,
Vol.20, No.3, pp.277-258. (EI)
|
