|
1. J.-C. Hsiung,H.-M. Tsai, H.-J. Tzeng,
P.-Y. Lin, J.-C. Chen, “Failure Analysis of the Wheel Flange Lubricator and
Bracket”, 2018The 13th International Symposium in Science and Technology, Kaohsiung, Taiwan, 2018.
2. J.-C. Hsiung, Y.-H. Cheng, H.-J. Tzeng, C.-K. Hsiao, S.-W.
Yang, H.S, Chen,“Study of the Application of Cryogenic Treatment on Bone
Saw Blade to Decrease Temperature Rise and Wear During Bone Cutting”, The
12th INTERNATIONAL SYMPOSIUM IN SCIENCE AND TECHNOLOGY, George Town, Penang
Island, 2017.
3.
Hsinn-Jyh
Tzeng, Po-Chin Huang,“A Study in The Discussion
of The effect of In-Mold Decoration Process for Shear Stress through Mold
Flow Analysis”, 2016 International Symposium on Novel and Sustainable
Technology, Tainan, Taiwan, 2016.
4. Hsinn-Jyh Tzeng, Jen-Chou Hsiung, Cheng-Lung Lee, “The
Study of Using Mold Flow Analysis to Investigate The Effect of Temperature
for In-Mold Decoration Process”, 2016 International Symposium on Novel and
Sustainable Technology, Tainan, Taiwan, 2016.
5.
Hsinn-Jyh
Tzeng, Cheng-Jhe Liou, Chung-Ming Tsai and
Li-Ming Chu,“A Study of Mold Flow Analysis in Over-Molding of the Plastic
Handle”, 2015-ISNST Symposium, Tainan, Taiwan, 2015.
6.
Li-Ming
Chu, Zong-wei Huang, Jer-Jia Sheu, Hsinn-Jyh Tzeng, and Wei-Chin
Chang,“EFFECTS OF MICROPOLAR LUBRICANTS ON PURE SQUEEZE EHL MOTION OF
CIRCULAR CONTACTS UNDER CONSTANT LOAD CONDITION”, 2015-ISNST Symposium,
Tainan, Taiwan, 2015.
7.
Jen-Chou
Hsiung, Chih-Kun Hsiao, H.-J Tzeng, J.-N. Lee, H.-S. Chen, H.-K.
Kung, “Influence of cryogenic treatment and coating on heat generation and
wear resistance during bone drilling”, The 10th International Symposium in
Science and Technology 2015, Bangkok, 2015.
8.
J.-C.
Hsiung, Hsinn-Jyh Tzeng, H.-K. Kung, H.-S. Chen,“Effect
of Cryogenic Treatment on the Performance of Tugnsten Carbide Tool”, 9th
International Symposium in Science and Technology, Kaohsiung, Taiwan, 2014.
9.
J.-C.
Hsiung, G.H. Tan, H.-J Tzeng, H.-S. Chen, H.-K. Kung,“The Study of Wear Resistance of the Artificial Knee
Joint”, 2013 International Symposium on Mechatronic and Biomedical
Engineering & Applications, Kaohsiung, Taiwan, 2013.
10.
J.-C.
Hsiung, H.-J Tzeng, H.-K. Kung, H.-S. Chen,“A Study of Thermal Spray
Coating on Artificial Knee Joints”, 2012 International Symposium on
Mechatronic and Biomedical Engineering & Applications, Cheng Shiu
University, Kaohsiung, Taiwan, 2012.
11.
Hsinn-Jyh
Tzeng, Jen-Chou Hsiung,Cheng-Lung Lee, “Cheng-zhe
Liu,“A Study Of Mold Flow Analysis In Family Mold For In-Mold Decoration”,
2011 International Symposium on Nano Science and
Technology(ISBN:978-986-6975-47-9), 2011.
12.
J.-C Hsiung
and H.-J. Tzeng, “Determination of Cure Stresses of Polymeric
Adhesives by a Modified Rheovibron DDV-II-B”, 2011 International Symposium
on Mechatronics and Biomedical Engineering & Applications(ISBN:978-986-7339-69-0)
, Cheng Shiu University, Kaohsiung, Taiwan, 2011.
13.
J.-C.
Hsiung, R.-T. Shieh, H.-J.Tzeng, H.-K. Kung,
and H.-S. Chen, “Effect of Cryogenic Treatment on the Impact and Wear
Properties of Plastic Lenses”, 6th International Symposium in Science and
Technology, Kansai University, 2011.
14.
J.-C.
Hsiung, Yu-Ting Tung, H.-J.Tzeng, H.-K. Kung,
and H.-S. Chen, “A Study of Structure and Process Parameters of Low Stress
Spiral Wound Gasket”, 6th International Symposium in Science and
Technology, Kansai University, 2011.
15.
J.-C. Hsiung, Hsinn-Jyh
Tzeng, H.-K. Kung, H.-S. Chen, J.-N. Lee, “Void Formation in
Die Attach Adhesives”, 2010 International Symposium on Mechatronic and
Biomedical Engineering & Applications（ISBN:978-986-7339-62-1）, pp.1-9, Cheng Shiu
University, Kaohsiung, Taiwan, 9, Nov., 2010.
16.
J.-C. Hsiung, C.-P. Liu, H.-J.Tzeng, H.-S.
Chen, H.-K. Kung, “A Study of Mechanical and Sealing Propertiesof
SpiralWound Gaskets”, 5th International Symposium in Science and Technology（ISBN: 978-986-7339-59-1）, pp.27-31, Kaohsiung,
Taiwan, August 23rd-25th, 2010.
17.
Hsinn-Jyh Tzeng, Ting-Yi Lin, Nai-Ren
Shiau, “Taguchi Methods Applies in the CAE Analysis on Warpage Behavior”,
2010 Conference on Precision Machinery and Manufacturing Technology-PMMT
2010（ISBN:978-986-6755-29-3）, A04-01~07, Pington
County, Taiwan, 22-23, May, 2010.
18.
Hsinn-Jyh Tzeng, Ji-Jer Huang , Jen-Chou Hsiung, Hsin-Hung Chen, Hsin-En Chen, “Application of
Simulation Analysis for Process Parameters
Optimization Design
in the Medicine-Box Shell”, 2010
Conference on Precision Machinery and Manufacturing Technology-PMMT 2010（ISBN:978-986-6755-29-3）, A20-01~09, Pington
County, Taiwan, May, 22, May, 2010（NSC 98-2622-E-218-001-CC3）.
19.
Hsinn-Jyh Tzeng, Jen-Chou Hsiung, Yi-Gang
Chen, “A Study of Taguchi method on Micro-hole EDM Machining Properties for
Tungsten carbide”, 2010 Conference on Precision Machinery and Manufacturing
Technology-PMMT 2010（ISBN:978-986-6755-29-3）, C29-01~06, Pington
County, Taiwan, 22, May, 2010（NSC 98-2622-E-218-001-CC3）.
20.
Hsinn-Jyh Tzeng, Jen-Chou Hsiung, Cheng-Lung Lee, “An Investigation of the
Simulation for Digital Camera Optical Mirror Base”, 2010 Conference on
Precision Machinery and Manufacturing Technology-PMMT 2010（ISBN:978-986-6755-29-3）, A31-01~07, Pington
County, Taiwan, 22-23, May, 2010（NSC 98-2622-E-218-001-CC3）.
21. J.-C. Hsiung, Y.-T. Tung, H.-J.Tzeng,
H.-S. Chen, H.-K. Kung, “Selection Criterion and Software Development
for Sealing Gasket”, pp.234-239（ISBN:978-986-7339-508）, 2009 International Symposium on Mechatronic and
Biomedical Engineering & Applications, Cheng Shiu University,
Kaohsiung, Taiwan, 5, Nov., 2009.
22. Hsinn-Jyh Tzeng, Yuh-Ping Chang , Ting-Wen Chu, “A Study of Surface Characteristics of Micro-EDM for SUS316L steel”, 2009 Conference on Precision Machinery and
Manufacturing Technology-PMMT 2009, Pington County, Taiwan, C29-01~08,
22~24, May, 2009.
23. H. J. Tzeng, T. M.
Shieh, M. S. Lin, L. Y. Chang, Y. B. Tsai, N. J. Hsiao, K. K.
Wu, “Studies of the application of mold flow analysis to find optimum
pouring position and cooling efficiency of ice wine bucket”, CAE Molding
Conference 2008, C01-1~5, Taipei, 23th Aug., 2008.
24. H. J.
Tzeng, C. Y. Wu, Y. R. Li, C. P. Tu, Y. C. Cheng, R. K. Lee, N. J.
Hsiao, “Discussions on the application of mold flow analysis to the warp
problem of international plug embedded components”, CAE Molding Conference
2008,
C02-1~8, Taipei, 23th Aug., 2008.
25. J. C. Hsiung and H. J. Tzeng, “Applying Six Sigma
Approach (DMADV) to Improve Quality of Marking Cartridge”, ISQM 2008,
Kaohsiung, 8th Nov, 2008.
26. H. J. Tzeng, C. C. Chu, T. Y. Tai,
Y. X. Chen, S. L. Ting and N. J. Hsiao, “The application of mold
filling analysis in Water Purification Mold, 2008 Conference on Mold
Technology, Taipei world trade center, pp.198~205, 22th August,
2008.
27. C. C. Chu, H. J.
Tzeng, Y. X. Chen and S. L. Ting, “Mold Flow Analysis for Plastic Case
of Water Purification”, 2008 Conference on Precision Machinery and
Manufacturing Technology-PMMT 2008, Howard Beach Resort-Kenting, Ping-Tung,
pp.A18-01~09, 23th-25th May, 2008.
28. H. J. Tzeng, J. C. Hsiung, T. W.
Chu and P. J. Chen, “A study of spiral polishing applied to micro finishing
for screw surface”, 2008 Conference on Precision Machinery and
Manufacturing Technology-PMMT 2008, Howard Beach Resort-Kenting, Ping-Tung,
pp.A29-01~06, 23th-25th May, 2008.
29. H. J. Tzeng, J. C. Hsiung, C. Y.
Tsai and C. S. Wang, “Characteristic study of spiral polishing with
magnetic abrasive on micro finishing surface”, 2008 Conference on Precision
Machinery and Manufacturing Technology-PMMT 2008, Howard Beach
Resort-Kenting, Ping-Tung, pp.E04-01~07, 23th-25th
May, 2008.
30. H. J. Tzeng, S. L. Chen, J. C.
Hsiung, T. W. Chu and C. S. Wang, “A study of spiral abrasive flow
machining applied to micro finishing for inner spiral surface”, 24th CSME,
Chung Yuan Christian University, Chung Li, D01-0058, pp.3413~3418, 23th-24th
Nov., 2007.
31. H. J. Tzeng and J. C. Hsiung, “The
effects of EBW parameters on fatigue crack growth of Ni-Cr-Mo-V alloy
steel”, 96 Taiwan Welding Society, Southern Taiwan University, Tainan,
pp.A52~58, 26th October, 2007.
32. C. Y. Tsai, H. J.
Tzeng, T. Y. Lee and W. M. Ou,“The
investigation of occupation-safety knowledge of operators in welding
plant”, 2007 Conference on Innovation of Industry Management,
Hsiuping Institute of Technology, Taichung, pp. C241-243,
5th May, 2007.
33. J. C. Hsiung and H.
J. Tzeng, “Suppression of Outgassing for Die Attach Adhesives by the Multi-Step
Cure Schedule”2007 Taiwan-Russia-Singapore Trilateral Symposium, Cheng Shiu
University, Kaohsiung, Taiwan, 6th Nov, 2007.
34. H. J. Tzeng, B. H. Yan and C. C.
Wang, “Characteristic study of spiral polishing on micro lapping surface”,
23th CSME, Kun Shan University, Tainan, D2-049, 24th-25th
Nov., 2006.
35. H. J. Tzeng, B. H. Yan, T. T.
Chang and R. T. Hsu, “A study on the development of abrasive and
application to abrasive flow machining for micro channel surface
finishing”, 4th ASIA –PACIFIC FORUM on Precision Surface
Finishing AND Deburring Technology, Taichung, Taiwan, Feng Chia University,
pp.203~210, 6th -8th June, 2005.
36. H. J. Tzeng, B. H. Yan, F. Y.
Huang and C. C. Wang and R. T. Hsu, “Characteristic study of micro slits
finishing”, 22th CSME, National Central University, Chung Li,
D2-009, 25th-26th Nov., 2005.
37. H. J. Tzeng, B. H. Yan, F. Y.
Huang and C. C. Wang and R. T. Hsu, “A study of the micro channel surfaces
finish using abrasive flow machining”, 21th CSME, National Sun
Yat-sen University, Kaohsiung, D0601138, pp.4535-4540, 26th-27th
Nov., 2004.
|
