|
姓名:王永鵬 |
職稱:副教授 兼國際事務處處長 |
|||||
|
|||||||
電話分機:3532 |
辦公室:K205-2 |
||||||
|
|||||||
E-Mail:wyplsm@stust.edu.tw |
|||||||
|
|||||||
實驗室:K003A 振動控制實驗室 |
|||||||
|
|||||||
最高學歷:美國賓州州立大學機械工程博士 |
|||||||
研究領域:自動控制、數位訊號、振動分析 |
|||||||
|
|||||||
學術榮譽 |
|||||||
|
|||||||
獲獎 |
|||||||
|
|||||||
期刊論文 |
|||||||
1. Y.-P. Wang, A. Sinha, Adaptive Sliding Mode Control Algorithm for a
Microgravity Isolation System, Acta Astronautica, 1998/07, EI 2. 王永鵬, 淺談精密機械振動控制, 機械工業, 1998/07. 3. 王永鵬, 智慧型刀具監測技術發展現況,機械工業, 1998/03, 其他 4. Y.-P. Wang, A. Sinha, Digital Control Algorithms for Multi-Degree-of-Freedom
Microgravity Isolation Systems, Acta Astronautic,
1993/12, EI 5. A. Sinha,
Y.-P. Wang,, Digital Control Algorithms for Microgravity Isolation Systems,
ASME, Journal of Vibration and Acoustics,1993/07, SCI |
|||||||
研討會論文 |
|||||||
1. Maw-Sung Jen and Yung-Peng Wang, CMAC Control Algorithm for the Compensation of
Friction and Backlash in the Precision Motion Control System, 2005
International Conference on System and Signals, 33-34, 2005/04. 2. 任懋松、王永鵬, PMC32-6000
DSP 六軸運動控制卡在精密運動控制之應用, 第21屆機械工程研討會, 1845-1850, 2004/12. 3. Yung-peng
Wang, Yung-chi Wu, Active Control Algorithms for a Modified Hard-Mounted
Isolation System, 2004 ASME International Mechanical Engineering Congress and
RD&D Exposition, 2004/11. 4. 李豐全、王永鵬, 改良型硬式隔振系統在精密機械之應用, 第20屆機械工程研討會, 481-487, 2003/12. 5. Song-Feng
Lee, Yung-Peng Wang, CMAC Control Algorithms for
Micro/Nano Motion Control Systems with Varying Friction Characteristics, 2003
International Symposium on Nano Science and Technology, 2003/11. 6. Yungpeng Wang, Intelligent Learning
Control Algorithm for High-Precision Motion Control Systems, IEEE/ASME
International Conference on Advanced Manufacturing Technologies and Education
in the 21st Century, 2002/08. 7. 王永鵬, 配備輔助站立系統之無線電控輪椅設計與開發, 第17屆全國技術及職業教育研討會工業類, 395-402, 2002/04. 8. 王永鵬, 主動式精密機械微振動控制, 第15屆全國技術及職業教育研討會工業類機械組, 99-108, 2000/04. 9. Y.-P. Wang, A. Sinha, Adaptive Sliding Mode Control Algorithm for
Multi-Degree-of-Freedom Microgravity Isolation Systems, 1997 IEEE
International Conference on Control Applications, 797-802, 1997/10. 10. Yungpeng Wang, Spring C. C. Hung,
Chi-Mao Hsieh and Der-Shung Suen,
A Neural Network for Tool Monitoring, The Fifth International Conference on
Condition Monitoring, 347-353 11. A. Sinha,
Y.-P. Wang, Digital Control Algorithms for Microgravity Isolation Systems,
ASME Biennial Conference on Mechanical Vibration and Noise, 247-256 |
|||||||
技術報告 |
|||||||
|