描述: C:\Users\stust\Desktop\wangsheng-chang.jpg

姓名：王聖璋

職稱：教授 兼系主任

電話分機：3548, 3500

辦公室：K308-3, K201

E-Mail：scwang@stust.edu.tw

實驗室：K109-2 FEG-TEM、K110-2 奈米功能性陶瓷實驗室

最高學歷：國立台灣大學材料科學與工程學博士

研究領域：奈米材料、陶瓷複合材料、奈米檢測

   學術榮譽

1.       獲嚴氏講座經費補助，至德國 DLR 進行訪問，嚴慶齡工業發展基金會補助博士後國外進修

2.       中華民國陶業研究學會論文比賽，博士組優等獎（ 90 ）, 陶研獎字第 001 號

3.       國科會研究計畫博士生獎學金一年 (89/8- 90/7)

4.       台灣大學材料科學與工程學研究所教育部獎學金兩年 (84/9 ~ 86/6)

   獲獎

1.       2008年 台灣奈米影像競賽  TEM組 佳作

2.       2007年 台灣奈米影像競賽  TEM組 佳作

   期刊論文

1.     Chia-Ling Wu, Po-Chia Huang, Jow-Lay Huang, Sheng-Chang Wang*,” Molybdenum Disulfide-based Composite Electrocatalysts by Hot-injection Method for Hydrogen Evolution Reaction” accepted by Ceramic International. (2014/4/17)

2.     Po-Chia Huang, Hsin-I. Wang, Sanjaya Brahma, Sheng-Chang Wang*, Jow-Lay Huang, “Synthesis and characteristics of layered SnS2 nanostructures via hot injection method” Journal of Crystal Growth, available online 25 October 2016.

3.     Po-Chia Huang, Muhammad Omar Shaikh, Sheng-Chang Wang*,“Structural and optoelectronic properties of alloyed SnxMn1-xS thin films”, Advanced Powder Technology, 27 (2016) 964-970.

4.     Po-Chia Huang, Jow-Lay Huang, Sheng-Chang Wang*, Muhammad O Shaikh, Chia-Yu Lin, “Photoelectrochemical properties of orthorhombic and metastable phase SnS nanocrystals synthesized by a facile colloidal method”, Thin Solid Films, 596(2015)135-139.

5.     Sheng-Chang Wang*, Muhammad Omar Shaikh, “A Room Temperature H2 Sensor Fabricated Using High Performance Pt-Loaded SnO2 Nanoparticles”, Sensors 15 (2015) 14286-14297.

6.     Yen-Hsing Chen, Yu-Min Shen, Sheng-Chang Wang, Jow-Lay Huang, “Fabrication of one-dimensional ZnO nanotube and nanowire arrays with an anodic alumina oxide template via electrochemical deposition”, Thin Solid Films, 570 (2014) 303-309.

7.     Betty Yan Jin Liang, Yu-Min Shen, Sheng-Chang Wang, Jow-Lay Huang, The influence of reaction temperatures and volume of oleic acid to synthesis SnS nanocrystals by using thermal decomposition method”, Thin Solid Films, 549(2013) 159-164 (31 Dec).

8.     Ching-Lin Wu, Chung-Kwei Lin, Chun-Kai Wang, Sheng-Chang Wang, Jow-Lay Huang, “Annealing induced structural evolution and electrochromic properties of nanostructured tungsten oxide films” Thin Solid Films, 549(2013) 258-262 (31 Dec).

9.     Chun-Kai Wang, Chung-Kwei Lin, Ching-Lin Wu, Sheng-Chang Wang, Jow-Lay Huang, “Synthesis and characterization of electrochromic plate-like tungsten oxide films by acidic treatment of electrochemical anodized tungsten”, Electrochimica Acta,112( 2013)24-31. (1, Dec).

10.   Ching-Lin Wu, Chun-Kai Wang, Chung-Kwei Lin, Sheng-Chang Wang, Jow-Lay Huang*, “Electrochromic properties of nanostructured tungsten oxide films prepared by surfactant-assisted sol-gel process”, Surface and Coatings Technology ,231 (2013) 403-407. (25 Sept).

11.   Pramoda K. Nayak, Chan-Jung Hsu, Sheng-Chang Wang, James C. Sung, Jow-Lay Huang*, “ Graphene coated Ni films: A protective coating”, Thin Solid Films, 529 (2013) 312-316 (1,Feb, 2013).

12.   Igor S. Lyubutin, Chun-Rong Lin, Sergey S. Starchikov, Yu-Jhan Siao, Muhammad Omar Shaikh, Konstantin O. Funtov, Sheng-Chang Wang, “Synthesis, structural and magnetic properties of self-organized single-crystalline nanobricks of chalcopyrite CuFeS2, Acta Materialia 61 (2013) 3956–3962.

13.   Chun-Kai Wang; Chung-Kwei Lin, Ching-Lin Wu, Sanjaya Brahma, Sheng-Chang Wang, Jow-Lay Huang, “Characterization of electrochromic tungsten oxide film from electrochemical anodized RF-sputtered tungsten films”, Ceramic International, 39[4], (2013), 4293-4298, (May).

14.   Chun-Kai Wang; D R Sahu; Sheng-Chang Wang; Chung-Kwei Lin; Jow-Lay Huang, “Structural evolution and chemical bondsin electrochromic WO3 films during electrochemical cycles”, Journal of Physics D- Applied Physics, 45 [22],(2012), 225303 (7 pages) (6, June, 2012).

15.   Chun-Kai Wang, Diptiranjan Sahu, Sheng-Chang Wang and Jow-Lay Huang, “ Electrochromic Nb-doped WO3 films: effects of post annealing”, Ceramic Interantional,38[4], (2012),2829-2833, (May).

16.   Sheng-Chang Wang, Pramoda K Nayak, You-Ling Chen, James C Sung and Jow-Lay Huang, “Growth of single crystal silicon carbide by liquid phase epitaxy using samarium/cobalt as unique solvent”, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 226[2],(2012), 75-79 (EI).

17.   Sheng-Chang Wang,*, Ya-Hwang Cheng, and Jow-Lay Huang, ” Fabrication of Insulating Micropatterns for Inner Electrode of Multilayer Ceramic Capacitor by Electrophoretic Deposition Based on SiO2 Nanopowder”, Procedia Engineering, 36 (2012), 528-533 (EI).

18.   Chan-Jung Hsu, Pramoda K. Nayak, Sheng-Chang Wang, James C. Sung, Chiang-Lun Wang, Chung-Lin Wu, and Jow-Lay Huang, “Spinodal Decomposition of Mono- to Few-Layer Graphene on Ni Substrates at Low Temperature”, Journal of Nanoscience and Nanotechnology Vol. 12[3], (2012), 2442-2447(SCI, March, 2012).

19.   Pei-Ting Lee, Pramoda K Nayak, Sheng-Chang Wang*, James C Sung, Jow Lay Huang*,”Microstructure Investigation of SiC Films Synthesized from Liquid Phase in Sm-Co melts”, Superlattices and Microstructures, 50[6] (2011), 634-646. (Dec.).

20.   Yu-Min Shen, Chih-Huang Pan, Sheng-Chang Wang*, and Jow-Lay Huang, “Ordered ZnO/AZO/PAM nanowire arrays prepared by seed-layer-assisted electrochemical deposition”, Thin Solid Films, 520 (2011)1532-1540.

21.   Sheng-Chang Wang, Pramoda K. Naya, You-Ling Chen, James C. Sung and Jow-Lay Huang,“Microstrucaural Analysis of Single Crystal SiC Prepared by Novel Liquid Phase Epitaxy”, Ceramic International, 37 (2011) 3671-3676.

22.   Yu-Min Shen, Yueh-Ting Shih, Sheng-Chang Wang, Pramoda K. Nayak, Jow-Lay Huang, “Characterization of ordered Cu2O nanowire arrays prepared by heat treated Cu/PAM composite", Thin Solid Films, 519 (2010) 1687-1692.

23.   Sheng-Chang Wang, How-Tung Lin, Pramoda K. Nayak, Shin-Yun Chang, Jow-Lay Huang, “Carbothermal Reduction Process for Synthesis of Nanosized Chromium Carbide via Metal Organic Vapor Deposition”, Thin Solid Films, 518 (2010) 7360–7365.

24.   C.K. Lin, C.H. Wu, C.Y. Tsai, C.Y. Chen, S.C. Wang, "Pseudocapacitive performance of hybrid manganese oxide films with multiwalled-CNT additions”, Surface & Coatings Technology, 205, (2010) 1595-1598.

25.   Jen-Hao Song, Jow-Lay Huang, Sean Wu, Sheng-Chang Wang, Jian-Long Ruan, Ding-Fwu Lii, “Surface acoustic wave device properties of (B, Al)N films on 128◦ Y–X LiNbO3 substrate”, Applied Surface Science 256 (2010) 7156–7159.

26.   Chun-Rong Lin, Cheng-Lung Yeh, Shih-Zong Lu, Igor S Lyubutin, Sheng-ChangWang and Igor P Suzdalev, “Synthesis, characterization and magnetic properties of nearly monodisperse CuCr2Se4 nanoparticles”, Nanotechnology, 21(2010)235603.

27.   Chun-Rong Lin, Shin-Zong Lu, Igor S. Lyubutin, Yu V. Korzhetskiy, Sheng-Chang Wang,and Igor P. Suzdalev, “Synthesis and magnetic properties of iron sulfide nanosheets with a NiAs-like structure”, Journal of Applied Physics, 10709A335 (2010)

28.   Chin-Yi Chen, Sheng-Chang Wang, Yue-Han Tien, Wen-Ta Tsai, Chung-Kwei Lin, “Hybrid manganese oxide films for supercapacitor application prepared by sol–gel technique,” Thin Solid Films , 518 (5), 1557–1560,(2009)

29.   Chin-Yi Chen, Sheng-Chang Wang, Chia-Yen Lina, Fan-Shiong Chen, Chung-Kwei Lin, “Electrophoretically deposited manganese oxide coatings for supercapacitor application”, Ceramic International, 35(9), 3469-3474, (2009)

30.   Jen-Hao Song, Sheng-Chang Wang, James C. Sung, Jow-Lay Huang, Ding-Fwu Lii, “Characterization of reactively sputtered c-axis orientation (Al, B)N films on diamond”, Thin Solid Films, 517 (17), 4753–4757, (2009)

31.   Chin-Yi Chen, Tzu-Chin Chien, Yu-Chen Chan, Chung-Kwei Lin, Sheng-Chang Wang,”Pseudocapacitive properties of carbon nanotube/manganese oxide electrode deposited by electrophoretic deposition”, Diamond & Related Materials, 18, 482–485 (2009)

32.   D. R. Sahu, L.Y. Hong, Sheng-Chang Wang, Jow-Lay Huang, “Synthesis, analysis and characterization of ordered mesoporous TiO2/SBA-15 matrix:  Effect of calcination temperature”, Microporous and Mesoporous Materials,117, 640-649, (2009)

33.   Chin-Yi Chen, Tzu-Chin Chien, Yu-Chen Chan, Chung-Kwei Lin, Sheng-Chang Wang, “Pseudocapacitive Properties of Carbon Nanotube / Manganese Oxide Electrode Deposited by Electrophoretic Deposition”, accepted by Diamond and Related Materials, (2008)

34.   Sheng-Chang Wang*, Shin-Yun Chang, Deulkar S. H., Jow-Lay Huang, “Phase Evolution Mechanism of Nanosized Chromium Carbide During Carbothermal Reduction Process from Precursor Cr(CO)6”, accepted by Chinese Journal of Mechanical Engineering, (2008) (EI)

35.   Sheng-Chang Wang, Chin-Yi Chen, Tzu-Chin Chien, Pee-Yew Lee, Chung-Kwei Lin, “Supercapacitive Properties of Spray Pyrolyzed Iron-Added Manganese Oxide Powders Deposited by Electrophoretic Deposition Technique”, Thin Solid Films, 517, 1234-1238, (2008)

36.   Sheng-Chang Wang, Bo-Chin Huang, “Field emission properties of Ag/SiO2/carbon nanotube films by pulsed voltage co-electrophoretic deposition”, Thin Solid Films, 517, 1245-1250, (2008)

37.   Tien-I Chang, Sheng-Chang Wang, Chuan-Pu Liu, Chen-Fu Lin, and Jow-Lay Huang*, “Thermal Behaviors and Phase Evolution of Lead Zirconate Titanate Prepared by Sol-Gel Processing: The Role of the Pyrolysis Time before Calcination” , Journal of the American Ceramic Society, 91[8], 2545-2552, (2008)

38.   Sheng-Chang Wang, Chih-Hsiung Tseng, ”Effects of Al2O3 Nanoparticle on the Microstructure and Magnetic Properties of Co/Al2O3 Coatings Prepared by Composite Plating”, Advanced Materials Research, 51, 131-139, (2008) (NSC 93-2216-E-218-007) (EI)

39.   Sheng-Yi Lee, Sheng-Chang Wang, Jen-Sue Chen, Jow-Lay Huang, “Ion beam sputter deposited TiAlN films for metal–insulator–metal (Ba,Sr)TiO3 capacitor application”, Thin Solid Films, 516 [9], 7816-7821, (2008)

40.   Sheng-Chang Wang, Yuan-Liang Chin and Jow-Lay Huang, “Microstructure and Mechanical Properties of Hot-Pressing Chromium Carbide/Alumina Nanocomposite Prepared by MOCVD in Fluidized Bed”, Journal of the European Ceramic Society, 28(2008)1909-1916. (NSC-95-2221-E-218-018)

41.   Sheng-Yi Lee, Sheng-Chang Wang, Jen-Sue Chen, Jow-Lay Huang*, “Effects of nitrogen partial pressure on electrical properties and thermal stability of TiAlN films by ion beam sputter deposition”, Surface & Coatings Technology, 202 (2007) 977-981.

42.   Hao-Tung Lin, Sheng-Chang Wang, Jow-Lay Huang, Shin-Yun Chang, “Processing of hot pressed Al2O3–Cr2O3/Cr-carbide nanocomposite prepared by MOCVD in fluidized bed”, J. Eur. Ceram. Soc., 27 (2007) 4759–4765.

43.   Hao-Tung Lin, Jow-Lay Huang, and Sheng-Chang Wang, “Investigation of Hot-Pressed Al2O3-Cr2O3/Cr3C2 Nanocomposite”, Key Engineering Materials, 351, 93-97, (2007)

44.   Tien-I Chang, Chen-Fu Lin, and Jow-Lay Huang, Sheng-Chang Wang, ”The Formation Mechanism of the Novel Core–Shell Microstructure inPolyvinyl Alcohol-Additive Lead Zirconate Titanate Films, J. Am. Ceram. Soc.,90(4), 1051-1057, (2007)

45.   Tien-I Chang, Sheng-Chang Wang, Chen-Fu Lin,and Jow-Lay Huang, “Effects of PVA Adding on the Microstructure and Composition of Sol-Gel Derived PZT Films”, Integrated Ferroelectrics, 85, 129–138, (2006)

46.   Sheng-Yi Lee, Sheng-Chang Wang, Jen-Sue Chen, Jow-Lay Huang, “Effects of deposition and post-annealing conditions on electrical properties and thermal stability of TiAlN films by ion beam sputter deposition”, Thin Solid Films, 515, 1069-1073, (2006)

47.   Hao-Tung Lin, Jow-Lay Huang, Sheng-Chang Wang, Chen-Fu Lin, ”Preparation of nanoscale Cr3C2 particles dispersed on alumina particles by MOCVD in fluidized reactor and carbothermal treatment” Journal of Alloys and Compounds, 417 [1-2], 214-219, (2006)

48.   Tien-I Chang, Jow-Lay Huang, Hong-Ping Lin, Sheng-Chang Wang, Horng-Hwa Lu, Long Wu, Jen-Fu Lin, “Effect of drying temperature on structure, phase transformation of sol–gel-derived lead zirconate titanate powders”, Journal of Alloys and Compounds, 414(1-2), 224-229,(2006) (1.562, 40/177)

49.   Chun-Rong Lin, Yuan-Ming Chu, Sheng-Chang Wang, “Magnetic properties of nanosized Sr2CrReO6 powders prepared by a combustion synthesis process”, Materials Letters 60 (2006) 2270–2273.

50.   Hao-Tung Lin, Wei-Sheng Huang, Sheng-Chang Wang, Horng-Hwa Lu, Wen-Cheng J. Wei, Jow-Lay Huang,Investigation of chromium carbide/alumina nano-composite prepared via MOCVD in fluidized bed and densification process”, Materials Science and Engineering B 127 (2006) 22–28.

51.   Chun-Rong Lin, Yuan-Ming Chu, and Sheng-Chang Wang, “Magnetic Properties of magnetite nanoparticles prepared by mechanical reaction”, Materials Letters, 60, 447–450, (2006) (1.186, 60/177)

52.   Tien-I Chang, Jow-Lay Huang, Hong-Ping Lin, Sheng-Chang Wang, Long Wu, Chen-Fu Lin, Effect of the Heating Rate for Preheating Process on the Composition and Phase Transformation of Sol-Gel Derived Lead Zirconate Titanate Thin Film, Integrated Ferroelectrics, 75, 55–68, (2005)

53.   Eduard Volz, Andreas Roosen, Sheng-Chang Wang , Wen-Cheng J. Wei,” Formation of Intergranular Amorphous Films during the Microstructural Development of Liquid Phase Sintered Silicon Carbide Ceramic,” Journal of Materials Science, 39[13], 4095-4101, (2004)

54.   Sheng-Chang Wang and Wen-Cheng J. Wei, “Characterization of electroplated Ni/SiC and Ni/Al2O3 composite coatings bearing nanoparticles”, J. Mater. Res., 18 [7],1566-1574 (2003) [NSC89-2216-E-002-016)

55.   S. C. Wang and W. J. Wei, “Kinetics of Electroplating Process of Nano-sized Ceramic Particle/Ni Composite,” Mat. Chem. Phy.,78 [3], 574-580, (2003) [NSC 89-2218-E-002-069]

56.   Sheng-Chang Wang, H. Z. Hsu, W. J. Wei, ”Microstructure of porous Sr-doped lanthanum manganite fabricated by sol-gel process , Key Engineering Materials, 247, 393-396, (2003)

57.   Sheng Chang Wang, Wen Cheng J. Wei, Li Tong Zhang, "Microstructural Characterization of LaB6-ZrB2 Eutectic Composites", Key Engineering Materials, 249, 101-104,(2003)

58.   S. C. Wang and W.-C. J. Wei, "Electrokinetic Properties of Nano-Sized SiC Particles in a Highly Concentration Electrolyte Solution,” J. Am. Ceram. Soc, 84 [7], (2001) [NSC89-2216-E-002-016]

59.   W.-C. J. Wei, S. C. Wang and F. Y. Ho, “Electrokinetic properties of yttrium-doped zirconia in aqueous suspension,” J. Am. Ceram. Soc, 82 [12] 3385-92 (1999) [NSC86-2262-E-002-026R]

60.   S. C. Wang, and W.-C. J. Wei, " Characterization of Al2O3 composites with Mo Particulates, II, Densification and Mechanical Properties," Nanostructured Materials, 10 [6] 983-1000 (1998) [NSC-87-2216-E-002-034]

61.   W.-C. J. Wei, S. C. Wang, and F. H. Cheng, "Characterization of Al2O3-Composites With Fine Mo Particles, I Microstructural Development," Nanostructured Materials, 10 [6] 965-981 (1998) [NSC-87-2216-E-002-034]

62.   Po-Chia Huang, Hsin-I. Wang, Sanjaya Brahma, Sheng-Chang Wang* and Jow-Lay Huang, "Synthesis and characteristics of layered SnS2 nanostructures via hot injection method, Journal of Crystal Growth(2016)

63.   Po-Chia Huang, Muhammad Omar Shaikh, and Sheng-Chang Wang*, "Structural and optoelectronic properties of alloyed SnxMn1-xS thin films, Advanced Powder Technology, 27, 964-970, (2016)

64.   Po-Chia Huang, Jow-Lay Huang, Sheng-Chang Wang*, Muhammad O Shaikh, and Chia-Yu Lin, "Photoelectrochemical properties of orthorhombic and metastable phase SnS nanocrystals synthesized by a facile colloidal method, Thin Solid Films, 596, 135-139, (2015)

65.   Sheng-Chang Wang*, and Muhammad Omar Shaikh, "A Room Temperature H2 Sensor Fabricated Using High Performance Pt-Loaded SnO2 Nanoparticles, Sensors 15, 14286-14397, (2015)

66.   Yen-Hsing Chen, Yu-Min Shen, Sheng-Chang Wang, and Jow-Lay Huang, "Fabrication of one-dimensional ZnO nanotube and nanowire arrays with an anodic alumina oxide template via electrochemical deposition, Thin Solid Films, 570, 303-309, (2014)

67.   Chia-Ling Wu, Po-Chia Huang, Jow-Lay Huang, and Sheng-Chang Wang*, "Molybdenum Disulfide-based Composite Electrocatalysts by Hot-injection Method for Hydrogen Evolution Reaction, accepted by Ceramic International, (2014)

　國內期刊論文

1.     胡品婕、王聖璋*、蔣瑞光、陳志榮，“以熱裂解法控制氧化錫奈米晶體之型態及結構”，2008年中國材料科學學會年會，台北、台灣，2008/11/21-2008/11/22。

2.     林冠成、陳政宜、王聖璋*，“以電泳法製備微模組圖像Development of a Graphic Design on a Target Panel by Electrocoat and Image Transfer Technologies”，2008 第六屆全國精密製造研討會，台南、永康，2008/11/8。

3.     Sheng-Chang Wang*, Ling-Ya Hung and Jow-Lay Huang, “Photocatalytic activity of SBA-15 silica-supported titania photocatalysts”, 2007 中國材料科學學會 –金屬陶瓷論壇  邀請演講，2007/11/17，新竹，交大。

4.     Pin-Jie Hu and Sheng-Chang Wang*, “ Field Emission Properties of Carbon Nanotube Composite Films by Pulsed Electrophoretical Depostion”, International Symposium on Nano Science and Technology (2007 ISNST)- Session (A) Nanomaterials: CNT & Diamond, Tainan, Taiwan, Nov. 2007, 118, ISBN: 978-986-6975-07-3.

5.     Tien-I Chang*, Sheng-Chang Wang, Chen-Fu Lin, Jow-Lay Huang, and Ding-Fwu Lii, “Effects of Annealing Treatments and PVAAddition on the Sol-Gel Derived PZT Films”, The International Conference on Technological Advances of Thin Films & Surface Coatings (Thin Films 2006)--Ferroelectric and piezoelectric thin films, December 11- 15, 2006, Singapore.

6.     Tien-I Chang*, Sheng-Chang Wang, Chen-Fu Lin, Jow-Lay Huang, “Low-Temperature SIntering of Sol-Gel Derived PZT Bulks”, The 5th Asian Meeting on Electroceramics (AMEC5) - Processing and Fabrication, Dec. 10-14, 2006, Bangkok, Thailand.

7.     Tien-I Chang, Jow-Lay Huang, Sheng-Chang Wang, and Chen-Fu Lin, “Effect of PVA adding on the Microstructure and Composition of Sol-gel Derived PZT films”, 18th International Symposium on Integrated Ferroelectrics (ISIF 2006), April 23-27, 2006, Honolulu, Hawaii, USA.

8.     黃伯勤、王聖璋，添加陽離子型分散劑以電泳法沈積奈米碳管場發射陰極之研究，2006材料年會-電子材料，Nov. 24-25, Tainan, 2006.

9.     李昇頤、王聖璋、陳貞夙、黃肇瑞，鍍膜與熱處理條件對離子束濺鍍鈦鋁氮薄膜之電性及熱穩定性之影響，2006材料年會-電子材料，Nov. 24-25, Tainan, 2006.

10.   劉盈麟、呂紹亦、林春榮、王聖璋，以機械合金法製備Ni/Cr2O3奈米複合材料之磁性研究，2006材料年會-磁性與紀錄材料，Nov. 24-25, Tainan, 2006.

11.   王聖璋、詹主民、詹德鳳、李裕安，界面活性劑對奈米碳管漿體性質與其場發射特性影響之研究，2005材料年會-奈米電子與光電材料，Nov. 25-26, 2005.

12.   Sheng-Chang Wang, Chih-Hsiung Tseng, Chun-Rong Lin, “Effect of Al2O3 Nanoparticle on the Microstructure and Magnetic Properties of Co Films Prepared by Composite Plating”, ISAMT/SOMMA 2005 ,August 24-27, 2005, Taipei, Taiwan.

13.   Chun-Rong Lin, Sheng-Chang Wang, Chih-Hsiung Tseng, KaiJan Lin, Deng-Maw Lu, “Micromagnetic Behavior in Electrodeposited Cobalt Film”, ISAMT/SOMMA 2005, August 24-27, 2005, Taipei, Taiwan.

14.   Chun Rong Lin, Wen-Chieh Lee, KaiJan Lin, Sheng-Chang Wang, ”Critical Phenomena in the Amorphous Ni62Nb8B30 Ferromagnet”, ISAMT/SOMMA 2005, August 24-27, 2005, Taipei, Taiwan.

15.   Chun-Rong Lin, Wen-Chieh Lee, Sheng-Chang Wang, Kai-Jai Lin, “Magnetic Properties of Amorphous (Fe1-xNix)62Nb8B30 Alloys”, ISAMT/SOMMA 2005 ,August 24-27, 2005, Taipei, Taiwan.

16.   Tien-I Chang, Jow-Lay Huang, Hong-Ping Lin, Sheng-Chang Wang, Long Wu, Chen-Fu Lin, “Effect of the Heating Rate for Preheating Process on the Composition and Phase Transformation of Sol-Gel Derived Lead Zirconate Titanate Thin Film”, 17th International Symposium on Integrated Ferroelectrics (ISIF 2005) April 17-20, 2005, Shanghai, China.

17.   Chih-Hsiung Tseng, Sheng-Chang Wang, Yuan-Ming Chu, Chun-Rong Lin, “Magnetic Properties of magnetite nanoparticles prepared by mechanicalchemical reaction, 2004 Annual Conference of Chinese Society for Material Sceicen, Nov. 17-18.

18.   Sheng-Chang Wang, Shih-Hsiung and Tseng and Chun-Rong Lin, “A novel method combining sol-gel process and combustion synthesis to prepared La0.8Sr0.2MnO3 nano powders and its magnetic properties”, 2004 Annual Conference of Chinese Society for Material Sceicen, Nov. 17-18.

19.   Yuan-Ming Chu, Chun-Rong Lin, Sheng-Chang Wang, Chih-Hsiung Tseng, Yu-Chu Li, KaiJan Lin, Wei-Chin Chang, and Deng-Maw Lu, “Magnetotransport behavior of patterned Sr2FeMoO6 thick films”, 中華民國物理年會 (2004). (NSC  1-2626-M-218-001)

20.   Chun-Rong Lin, Yuan-Ming Chu, Sheng-Chang Wang, Chih-Hsiung Tseng, Yu-Chu Li, KaiJan Lin, Wei-Chin Chang, and Deng-Maw Lu, “Magnetic properties of magnetite nanoparticles prepared by mechanochemical reaction”, 中華民國物理年會 (2004).

21.   Chun-Rong Lin, Wen-Juan Fu, Sheng-Chang Wang, Yuan-Ming Chu, Chih-Hsiung Tseng, Yu-Chu Li, KaiJan Lin, Wei-Chin Chang, and Deng-Maw Lu, “Magnetic behavior of CoFe2O4/SiO2 nanocomposites prepared by the sol-gel process”,中華民國物理年會 (2004).

22.   Y. C. M. Li, J. X. Wang, S. C. Wang, C. R. Lin, D. M. Lu and S. K. Loyalka, ”Theoretical Study on the Surface Effect of Nano-scale Particles”, Proceeding of 2003 International Symposium on Nano Science and Technology (2003 ISNST), Nov. 11-7, Tainan, Taiwan, ROC.(2003), p.241.

23.   Max Chung, Sheng Chang Wang, Te Hwa Fang, “Proposal of Production of Nano-Material with Pulsed Wire Discharge”, Proceeding of 2003 International Symposium on Nano Science and Technology (2003 ISNST), Nov. 11-7, Tainan, Taiwan, ROC.(2003), p.146.

24.   Yuan-Ming Chu, Chun-Rong Lin, Sheng-Chang Wang and Deng-Maw Lu, “Magnetic Properties of Nanosized Sr2CrReO6 powders Prepared by a Combustion Synthesis Process”, Proceeding of 2003 International Symposium on Nano Science and Technology (2003 ISNST), Nov. 11-7, Tainan, Taiwan, ROC.(2003), p.149.

25.   C. C. Tu, Y. C. M. Li, C. R. Lin, S. C. Wang, D. M. Lu and S. K. Loyalka, “Study on the Sol-gel Method for Spectrally Selective Coatings”, Proceeding of 2003 International Symposium on Nano Science and Technology (2003 ISNST), Nov. 11-7, Tainan, Taiwan, ROC.(2003), p87.

26.   E. Volz, A. Roosen, M. Albrecht, S. C. Wang, W.-C. J. Wei, “Microstructure and Electrical Resistivity of SiC Ceramics,” 104 th Annual meeting of Am. Ceram. Soc., St. Louis, Missouri, USA.(2002)

27.   王聖璋，韋文誠，高硬度與高耐磨性之碳化矽與鎳的複合電鍍技術，2002 跨世紀科技列車研討會， 2002 年4 月19 日，國立高雄應用科技大學。

28.    S. C. Wang and W. J. Wei, “Characterization of Electroplated with Concentrated Ultrafine Ceramic Inclusion,” Proc. of 2nd Ceramic and Metallic Based Composites Of Straits,Taichung, Taiwan, (2001).

29.   S. C. Wang, K. H. Shen, C. S. Lee and W. J. Wei, “Composite Electro-Plating of Ni Layers with Ultra-Fine SiC Particles,” 70-77, Proc. of The Relationship on Properties, Processing and Microstructure of Advanced Ceramics, ed. J. Guo and X. Yao, Shanghai Scientific and Technology Literature Publishing House, 5th IUMRS, Beijing, China, (1999)

30.   S. C. Wang, and W. C. J. Wei, “Electrokinetic Properties of Nano-Sized SiC Particles in Highly Concentrated Electrolyte Solution”, 286-291, Proc. of The Relationship on Properties, Processing and Microstructure of Advanced Ceramics, ed. J. Guo and X. Yao, Shanghai Scientific and Technology Literature Publishing House, 5th IUMRS, Beijing, China, (1999)

31.   S. C. Wang, K. H. Shen, C. S. Lee, and W. C. Wei, “Ultra-Fine Ceramic Particles/Ni composite Layer Prepared by Electro-Plating”, Proceedings of the 1998 Annual Conference of the Chinese Society for Materials Science, Volume (E), 35-38 (1998)

32.   王聖璋，韋文誠，“氧化鋯粉體在水溶液中表面電位性質之分析“，86 年陶業年會。

　技術報告

2002/04 

王聖璋, 高硬度與高耐磨性之碳化矽與鎳的複合電鍍技術, 2002跨世紀科技列車研討會國立高雄應用科技大學

1997/01 

王聖璋, 粉末會刊

　

　專利

1998/06 

W. C. Wei, S. C. Wang, K. H. Shen, and C. S. Lee, Nickel Electroplating solution for providing composite nickel coatings

　

　研究計畫

2016/08~ 2017/07

二硫化鉬奈米片複合結構電催化材料應用於析氫反應之研究，科技部(1,110,000)

2015/10~ 2019/09

高附加價值高強度高表面品質鋁合金之研發與產業人才培育計畫，科技部(21,922,000)

2015/08~ 2016/07

介穩態SnS奈米晶體光電化學性質與水解製氫研究，科技部(888,000)

2015/10

2015國際奈米科技研討會，科技部(90,000)

2014/08~ 2015/07

奈米半導體金屬硫化物於可見光催化水解製氫之研究，科技部(983,000)

2014/08~ 2015/07

貴重儀器服務合約，業界(200,000)

2014/06~ 2015/05

南部科學工業園區研發精進產學合作計畫－應用於3C產業之高表面品質7XXX高強度鋁合金開發，業界(1,030,000)

2013/01~ 2013/12

螢光粉與無機-有機混成噴墨墨水的製備-應用於白光LED封裝，教育部(680,000)

2011/08~ 2014/07

低維度硫化錫奈米材料與結構之合成、分析與應用，國科會(2,778,000) (NSC 100-2221-E-218 -023 -MY3)

2011/05~ 2015/06

南臺科技大學貴重儀器服務合約書 - 高解析場發射掃描式電子顯微鏡 - 場發射槍穿透式電子顯微鏡，業界(500,000)

2011/11

2011國際奈米研討會，國科會(NSC 100-2916-I-218-001-A1)

2008/08~ 2011/07

氧化錫奈米材料與結構之合成、分析與應用，國科會(2,470,000) (NSC 97-2221-E-218 -005 -MY3)

2008/11~ 2011/10

新世代基層陶瓷電容器開發三年計畫-分項子計畫B3：低溫端電極製程技術，經濟部

2008/06~ 2009/01

以液相法合成SiC單晶，業界(800,000)

2007/06~ 2013/04

微模組圖像製作，業界(1,448,245)

2007/08~ 2008/07

電泳與電化學共沈積奈米碳管/金屬/陶瓷複合鍍膜—在光電與燃料電池應用，國科會(670,000) (NSC 96-2221-E-218-025-)

2005/03~ 2005/12

最佳化ECR-CVD奈米碳管成長與結構分析，業界(900,000)

2006/08~ 2007/07

以脈衝電泳沈積法製備奈米碳管場發射顯示器之研究，國科會(647,000)(95-2221-E-218-018-)

2004/08~ 2005/07

以複合電鍍法製備Co/Al2O3奈米複合結構之機械性質與磁學性質研究, 國科會(542,400), NSC93-2216-E-218-007

2004/07~ 2005/02

以電鍍技術合成Cu-Ni雙層巨磁阻奈米絲

2004/06~ 2005/12

奈米碳管高解析電子顯微鏡微結構與漿體性質分析, 業界(1,300,000), 2-8

　服務

2005/05~ 2005/05

行政院勞委會, 校外服務, 熱處理技術士監評委員

2004/11~ 2004/11

奈米中心, 研討會, 2004奈米國際研討會

2004/09~ 2005/08 

機械工程系, 學生事務, 委員會, 委員

2004/06~ 2004/06

國立成功大學, 校外服務, 論文口試委員

2004/05~ 2004/05

行政院勞委會, 校外服務, 熱處理技術士檢定監評委員

2004/01~ 2004/01

機械工程系, 國立中正大學, 校外服務, 論文口試委員

2003/11~ 2003/11

奈米中心, 校外服務, 舉辦2003 奈米國際研討會

2003/07~  迄今

機械系, 研討會, 導師

2003/06~ 2003/07

機械工程系, 國立台灣大學, 校內其他, 碩士口試委員