|
姓名:莊承鑫 |
職稱:教授 兼軟性光電元件滾印中心主任 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
電話分機:3543 |
辦公室:K315-2 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
E-Mail:chchuang@stust.edu.tw |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
實驗室:K108-1 奈米技術實驗室、K305 微奈米感測技術實驗室、K307 微奈米結構應用實驗室、軟性光電元件滾印中心 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
最高學歷:國立成功大學土木工程研究所博士 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
研究領域:微流體系統、奈米壓印技術、SPM檢測技術、材料機械性質 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
學術榮譽 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
國內外研討會委員會、會議主持人、邀請演講: 1.
Program Committee
of the 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics
(AIM 2005), 24-28 July, 2005, Monterey, California, USA. 2.
Session Chair
of the 9th Nano Engineering and Microsystem Technology Conference, Tainan,
Taiwan, Nov. 2005. 3.
Session Chair
of the 4th Conference on Precision Machinery and Manufacturing Technology,
Kenting, Taiwan, May 2006. 4.
Session Chair
of the 23rd National Conference on Mechanical Engineering, Tainan, Taiwan,
November 2006. 5.
Publication Chair and
Program Committee of the 3rd International
Conference on Sensing Technology (ICST 2008), December 2008 in Tainan,
Taiwan. 6.
Program Committee
of the 6th International Symposium on Advanced Technology, Tokyo, Japan,
November 5-6, 2007. 7.
Session Chair
of The 16th National Conference on Automation Technology, Kaohsiung, Taiwan,
June 27-28, 2008. 8.
Invited Talk
of the 3rd IEEE International Conference on Nano/Micro Engineered and
Molecular Systems (IEEE-NEMS), Sanya Hainan Island, China, 6-9 January, 2008. 9.
Visiting Professor,
Kumamoto University, Japan, 2-12 September, 2008. 10. Invited
Talk
of the Second Yellow Sea Rim Workshop on Explosion, Combustion and other
Energetic Phenomena (YSR-2), Kumamoto University, Japan, 11th
September, 2008. 11. Invited
Talk of
the Cross-strait Workshop on Micro/Nano Technology, Beijing, China, 24
October, 2008. 12. Session
Chair of the 4th IEEE International Conference
on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS), Shenzhen, China,
5-8 January, 2009. 13. Invited
Talk
of the OZ-09 International Symposium on Nanostructures, Ritsumei University,
Japan, 4th March, 2009. 14. Invited
Talk,
Kumamoto University, Japan, 3-6 March, 2010. 15. Invited
Talk
of the Fifth Yellow Sea Rim Workshop on Explosion, Combustion and other
Energetic Phenomena (YSR-5), Okinawa National College Technology, Japan, 11th
March, 2011. 16. Invited
Talk
of the Sixth Yellow Sea Rim Workshop on Explosion, Combustion and other
Energetic Phenomena (YSR-6), Kumamoto University, Japan, 8th -10th
September, 2011. 17. Program
Committee of the 5th International Conference on Sensing
Technology, Palmerston North, New Zealand, Nov. 28th - Dec. 1st, 2011. 18. 受邀擔任2008年美新杯MEMS傳感器應用大賽評審委員 19. 受邀擔任國家晶片系統設計中心97年度晶片製作成果發表會初審評審 20. 受邀擔任2009年第13屆奈米工程暨微系統技術研討會-會議主持人 21. 受邀擔任國家晶片系統設計中心2009年01月專業委員會委員 22. 2009年受邀美律股份有限公司邀請演講 23. 2009年受邀富迪科技Fortemedia專題演講 24. 2009年受邀國立成功大學航太系專題演講 25. 2009年受邀國立中興大學精密工程研究所專題演講 26. 受邀南台科技大學協助辦理2009年國際藝術文化節 27. 2010年受邀至國立聯合大學光電系碩士班邀請演講 28. 2010年受邀至國立中山大學機械與機電工程學系專題演講 29. 2010年受邀至國立中正大學機械工程系專題演講 30. 2010年受邀至國立雲林科技大學機械系專題演講 31. 受邀擔任財團法人國家實驗研究院2010年CIC出席審查會擔任評審委員 32. 受邀擔任2010年行政院國家科學委員會工程處專業委員會委員 33. 受邀擔任中華民國微系統暨奈米科技協會-學會行政職務 34. 受邀擔任國家晶片系統設計中心2010年08月專業委員會委員 35. 受邀擔任國家晶片系統設計中心2010年09月專業委員會委員 36. 受邀擔任國家晶片系統設計中心2010年11月專業委員會委員 37. 受邀擔任國家晶片系統設計中心2011年03月專業委員會委員 38. 受邀擔任國家晶片系統設計中心2011年04月專業委員會委員 39. 受邀擔任國家晶片系統設計中心2011年07月專業委員會委員 40. 2011年受邀至工業技術研究院南分院微系統科技中心"微機電麥克風封裝應力分析"演講教授 41. 2011年受邀至工業技術研究院演講"MEMS封裝應力模擬分析"演講教授 42. 受邀擔任2011台灣智慧型機器人國內及國際邀請賽競賽委員 43. 受邀擔任國家晶片系統設計中心2011年舉辦99年度晶片製作成果發表會評審委員 44. 2010年受邀至國立成功大學航太所專題演講 45. 2010年受邀至日本熊本大學機械系統系進行專題演講 46. 2010年受邀至國立中正大學機械系專題演講
47. 2010年受邀至士盟科技股份有限公司專題演講 48. 2010年受邀至國立中山大學機械與機電工程學系進行專題演講
49. 2010年受邀至國立聯合大學光電系碩士班進行專題演講 50. 2010年受邀至工業技術研究院南分院微系統科技中心,擔任"微機電麥克風封裝應力分析"演講教授 51. 2010年受邀至國立雲林科技大學機械系專題演講講師
52. 「第14屆奈米工程暨微系統技術研討會(NMC 2010)」,新竹交大
53. 「International Symposium on Nano Science and Technology 2011」,南台科大
54. 2012年國立高雄應用科技大學機械系專題演講講師
55. The Fifth Yellow Sea Rim Workshop on Explosion, Combustion and other Energetic Phenomena, Kumamoto University, Japan, 11th March, 2011.
56. The Sixth Yellow Sea Rim Workshop on Explosion, Combustion and other Energetic Phenomena, Kumamoto University, Japan, 8th-10th September, 2011
57. 2012年受邀至榮剛材料科技擔任"綠色能源與加工技術研討會"演講教授
58. 2011年受邀至新竹工研院擔任"MEMS封裝應力模擬分析"演講教授
59. Session Chair of 中國機械工程學會第二十九屆全國學術研討會,台灣高雄,2012年12月7-8日
60. 2013年擔任國立台灣大學材料科學與工程學系專題演講講師
61. 2013年光電科技雜誌擔任"最新導光微結構創新應用於照明/太陽能/平面顯示之趨勢及未來發展方向"講座講師
62. 2013年 The 6th International Symposium on Nanostructures(Oz-13 conforemce)演講教授
63. Session Chair of IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS2013), April 19-20, Japan kyoto.
64. Session Chair of the 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS), Suzhou, China, April 07-10, 2013.
65. 2014年擔任屏東科技大學土木工程系專題演講講師
66. 2014年擔任台灣電子設備協會軟性電子元件滾印技術與設備講座之講師
67. 2014年財團法人金屬工業研究發展中心邀請台灣傳統產業科技創新應用發展規劃座談
68. 2015年受邀至金屬工業研究發展中心台中區域-次世代觸控面板關鍵設備與商機座談會講師
69. 2015年受邀至國立臺南大學系統工程研究所-專題演講講師
70. 2015年受邀至大同大學擔任物聯網演講
71. 2015年國立台南大學跨領域人才整合演講
72. 2015年受邀至電子協會"機器人於觸覺、視覺、腦波技術與應用講座(8/12)"演講
73. 2015年受邀至南科產學協會"聚焦電子束奈米製程與檢測技術產學技術交流媒合會"演講
74. 2016年受邀至國立高雄應用科技大學-“德國工業4.0應用與趨勢之經驗分享”
75. 2016年南臺科技大學-EMBA在職專班-邀請演講“工業4.0的應用與趨勢”講師
76. 2016年受邀至台灣大學化工系專題演講滾印技術應用於軟性光電元件講師
77. 2016年受邀至台灣化學感測器科技協會2016年會(SACST)邀請演講講師
78. 2016年受邀至國家奈米元件實驗室-第23屆奈米元件技術研討會講師
79. 2016年受邀至中原大學機械系書報討論演講講師
80. 2016年受邀至高雄應用科技大學機械系專題研討演講邀請講師
81. 2016年受邀至International Conference on Optofluidics 2016邀請演講講師
82. 2017年次世代顯示技術MicroLED(Semi)-半導體演講
83. 2017年高雄陸軍官校演講工業4.0與智慧產品
84. 2017年受邀至國立雲林科技大學-“德國工業4.0應用與趨勢之經驗分享”
85. 2017年受邀至國立高雄第一大學-“跨領域整合計畫人才培育”
86. 2017年受邀國立台北科技大學-“運用物聯網加值智慧產品以提升台灣競爭力”
87. 2017年高雄寒軒大飯店-受邀“德國工業4.0應用與趨勢之經驗分享”
88. 2017受邀至年金屬中心-“德國工業4.0應用與趨勢之經驗分享”
國內外論文審查委員: 1.
Applied Physics Letter 2.
IEEE Transactions on
Automation Science and Engineering 3.
International Journal of
Optomechatronics 4.
Sensors and Actuators A:
Physical 5.
IEEE Transactions on
Industrial Electronics 6.
Proceedings of the 2nd
Integration & Commercialization of Micro & Nanosystems International
Conference & Exhibition June 3-5, 2008, Kowloon, Hong Kong 7.
ELECTROPHORESIS 8.
Journal of the Chinese
Society of Mechanical Engineers 9.
研討會論文審查委員:國內研討會「第三十二屆中華民國力學學會年會暨全國力學會議」2008/09/26。 10. 中國機械工程學會第二十一屆全國學術研討會,論文評審委員 11. ASME
2009 2nd Micro/Nanoscale Heat & Mass Transfer International Conference 12. 研討會論文審查委員:國內研討會「2010製造與工程系統國際研討會」 2010/12/16-18。 13. MES
2010 International Conference School of Engineering 14. I2MTC2011,
IEEE International Instrumentation And Measurement Technology Conference 15. 研討會論文審查委員:國內研討會「第十四屆奈米工程暨微系統技術研討會」2010/09/02-03。 16. ICST2011,
The 5th International Conference on Sensing Technology
17. 2011年『ICCSIT 2011 Conference』研討會擔任論文審議委員
18. 2012~2015年『IEEE I2MTC conference』研討會擔任論文審議委員
19. 2012年『IEEE International Instrumentation and Measurement Technology Conference』研討會擔任論文審議委員
20. 2012年『2012 IEEE Symposium on Industrial Electronics and Applications』研討會擔任論文審議委員
21. 2012年『IEEE Symposium on Industrial Electronics and Applications』研討會擔任論文審議委員
22. 2012年中國機械工程學會第二十九屆全國學術研討會委員
23. 2013年『AMPT2013國際研討會』研討會擔任論文審議委員
24. 2013年『IEEE Transactions on Industrial Electronics(TIE)』研討會擔任論文評審
25. 2013年『IEEE International Conference(ICSIMA 2013)』研討會擔任論文評審
26. 2013年『12th International Symposium on Advanced Technology (ISAT-12)』研討會擔任論文評審
27. 2013年『中國機械工程學會』研討會擔任論文評審
28. 2013年『IEEE I2MTC conference』研討會擔任論文評審
29. 2013年『AMPT2013』研討會擔任論文評審
30. 2013~2014年『Eighth International Conference on Sensing Technology (ICST)』研討會擔任論文評審
31. 2013~2014年『Thin Solid Films(TACT 2013))』研討會擔任論文評審
32. 2014年『IEEE-NEMS 2014』研討會擔任論文評審
33. 2015年『The Society of Pure & Applied Coordination Chemistry(SPACC)』研討會擔任論文評審
34. 2015年『中華民國微系統暨奈米科技協會』研討會擔任論文評審
35. 2015年『ICSIMA 2015』研討會擔任論文評審
36. 2015年『ICSSA 2015』研討會擔任論文評審
37. 2016年台灣機電工程國際學會第一屆理事20160506
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
獲獎 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.
2007上銀科技機械碩士論文科技大學特別獎,指導學生:呂建堂,論文名稱:應用電動力捕捉微粒於微圓柱陣列晶片之研究。 2.
2008上銀科技機械碩士論文科技大學特別獎,指導學生:葉程哲,論文名稱:奈米粒子對細胞電致旋轉之影響。 3.
BEST CONFERENCE PAPER
AWARD
of The 3rd IEEE International Conference on Nano/Micro Engineered and
Molecular Systems (IEEE-NEMS 2008). 4.
YOUNG RESEARCH AWARD
of International Symposium on “Nanotoxicology Assessment and Biomedical,
Environmental Application of Fine Particles and Nanotubes” (ISNT2008). 5.
2009南台科技大學專利研發成果加值競賽第三名,得獎作品:能曲能聲、置聲適外—可撓具指向性之陣列式揚聲器。 6.
2010第十八屆全國自動化科技研討會機電整合最佳論文佳作,指導學生:劉一融,論文名稱:軟性陣列式觸覺感測器應用於雙足機器人之足部壓力感知。 7.
2010台北國際發明暨技術交易展金牌獎,得獎作品:具三維微結構之生物微粒抓取器及其製造方法。 8.
BEST POSTER AWARD of the 4th
International Symposium on Nanostructures (Oz-11),指導學生:劉一融,論文名稱:Flexible
Tactile Sensor with Microstructural Electrodes Array for Mapping Foot
Pressure of a Biped Robot。 9.
BEST POSTER AWARD of the 4th
International Symposium on Nanostructures (Oz-11),指導學生:陳毓良,論文名稱:Spherical
Microstructure Array on a Steel Roller based on the Self-Assembly of Glass
Beads。 10. 2011台北國際發明暨技術交易展銀牌獎,得獎作品:壓電式觸覺感測器。
11. 2011第十五屆奈米工程暨微系統技術研討會優秀壁報論文,指導學生:吳熏培,論文名稱:聚導電聚苯胺薄膜隻可撓性酸鹼值感測器。 12. 2012年工業技術研究院獎勵,研究發明?Micro-speaker and manufacturing method thereof?榮獲美國發明第8218797號專利,特頒獎勵。
13. Excellent Award of Poster Competition,2013 International Symposium on Nano Science and Technology,Title:Antiboby Array Biochip For Immunoassay Of Bladder Cancer Cell Lysate Based On Silane-Coated Nanoprobes.
14. 第十七屆奈米工程暨微系統技術研討會,佳作,論文題目:具透明電極之陣列式介電泳晶片應用於膀胱癌免疫檢測。
15. 第十七屆奈米工程暨微系統技術研討會,最佳論文獎,論文題目:應用軟性觸覺感測器辨別黏膜下組織軟硬度。
16. 2013年南臺科技大學校園創業競賽,佳作,指導學生:李文妤、王柏翔,作品名稱:太陽能面板用-多角度抗反射光學膜。
17. 2013夢想起飛創新創意競賽,第三名,題目:抗反射光學膜保護貼,指導學生:王柏翔、李文妤。
18. 2013創新致勝 引領未來-創新創意創業競賽,最佳人氣獎,題目:膜範生,指導學生:王柏翔、李文妤。
19. 2014"海?杯"?岸大?生???划邀??,优胜?,指導學生:王詩晴,蔡宇軒,李讚修,翁琬晴,論文名稱:具力量回饋之內視鏡附件。
20. 2014第四屆全研科技論文獎,【兩岸大專組創意設計類】佳作,指導學生:陳峰,翁靖維,吳宇文,論文名稱:多生物標記免疫分析晶片之多流道控制系統研發。
21. 2014年第九屆戰國策創業競賽,【創新創業組】佳作,指導學生:陳育鈴,吳德貞,陳建銘,王柏翔,論文名稱:太陽能面板用-多角度抗反射光學膜。
22. 2014年萬潤創新創意競賽,工程應用類,金牌獎,指導學生:李讚修。
23. 第18屆奈米工程暨微系統技術研討會,最佳論文獎,指導學生:李讚修,呂昆峰,論文名稱:內視鏡用微型軟硬度感測器之開發。
24. 2014年夢想起飛創新創意競賽,第一名,指導學生:呂昆峰、李讚修。專利研發成果加值競賽展(2013),指導學生:李文妤、王柏翔,作品名稱:Film Master。
25. The 5th International Conference on Optofluidics 2015,Best Conference Paper Award,指導學生:張凱傑、張龍右、吳熏培,論文名稱:Paper-Based Biosensor with Three-Dimensional Channel for Impedlimetric。
26. 2015生醫機電與臨床創意設計、製作競賽,特優獎,指導學生:薛宇翔,李讚修,蔡宇軒,論文名稱:微機電式觸覺感測器應用於內視鏡診斷。
27. 第十九屆奈米工程暨微系統技術研討會,海報特優獎,指導學生:黃廷圻、陳仕旻、吳定峰、陳澄河,論文名稱:阻抗免疫感測晶片應用於檢測人工尿液之膀胱癌生物標記。
28. 第十九屆奈米工程暨微系統技術研討會,中華民國微系統暨奈米科技協會感謝狀。
29. 全國大專院校資訊應用服務創新獎,應用組佳作,經濟部工業局、教育部資訊及科技教育司,指導學生:翁琬晴、廖尹瑜、黃微婷、王雨萱、李冠嘉、邱繼億、蘇健平、孔元田,論文名稱:iTape物流配送即時監測與管理系統。
30. 全國大專院校資訊應用服務創新獎,第二名,經濟部工業局、教育部資訊及科技教育司,指導學生:翁琬晴、廖尹瑜、黃微婷、王雨萱、李冠嘉、邱繼億、蘇健平、孔元田,論文名稱:iTape物流配送即時監測與管理系統。
31. 第五屆全國大專院校智動化設備創作競賽,佳作,均豪精密工業股份有限公司,指導學生:陳建銘、張博翔、陳世獄、陳郁婷,論文名稱:連續式紫外光固化滾對板自動化設備製作OGS觸控感測薄膜。
32. 2016首屆京台青年創新創業大賽-決賽資格,教師:莊承鑫、張萬榮、李大輝,指導學生:邱繼億、黃中琳、蘇健平、郭丞晉、孔元田、譚怡恩、邱義展、劉睿哲、曾昱翔、林辰儒、翁琬晴、陳佳萱、林慧雯,論文名稱:iTape物流配送即時監測與管理系統。
33. 2016年專利研發成果加值競賽展CTIC,佳作獎,指導學生:翁琬晴、黃中琳、孔元田、蘇健平、邱繼億,論文名稱:iTape-根植於壓電薄膜感測器之智慧物流管理系統。
34. 2016年專利研發成果加值競賽展CTIC,佳作獎,指導學生:陳慶嘉、蔡佳憓、李佩融、江驊晟,論文名稱:外加保護氣體之細微金屬線送線模組。
35. 2016化學感測器科技協會傑出論文獎,2016化學感測器科技協會,指導學生:莊承鑫、杜翌群、吳定峰、陳澄河、李大輝、陳仕旻、黃廷圻、吳熏培、Muhanmmad Omar Shaikh,論文名稱:Immunosensor for the ultrasensitive and quantitative detection of bladder cancer in point of care testing。
36. 第五?中??新??大?港澳台?(?生?)暨第三??岸四地大?生?新??大?,二等?,iTape,老師:莊承鑫,張萬榮,李大輝,蔡宗岳。學生:蘇健平,曾昱翔,譚怡恩,劉睿哲,黃宇成,彭硯禧,林慧雯,陳佳萱,王承安,黃中琳。
37. 第二十屆奈米工程暨微系統技術研討會,論文佳作獎(A組),共執:盧燈茂、潘正堂,其他:黃中琳、潘正堂、林煌山、葉哲源,論文名稱:結合靜電紡絲技術開發可撓式PVDF纖維觸控布料。
38. 第二十屆奈米工程暨微系統技術研討會,論文佳作獎(A組),指導學生:陳嘉文、洪瑩儒,論文名稱:具薄膜場效電晶體陣列的超聲波觸覺感測器於接觸力量的量測。
39. 2016年第二屆旭泰科技論文獎,旭泰銅獎(第三名),線型金屬3D列印-自動送線機構,莊承鑫、陳慶嘉、李佩融、蔡佳憓。
40. 2016跨領域工程專題競賽與成果展,【觀摩組】銀牌獎,高透光金屬網格應用於電磁波屏蔽,老師:莊承鑫,陳文山。學生:陳力揚,李明育,石博安,廖柏渝。
41. 2016全國大專院校產學創新實作競賽,【機械及自動化組】傑出獎,線型金屬3D列印機,老師:莊承鑫,蔡宗岳。學生:陳慶嘉,李佩融,曾鈺琪,鄭雅文,林芳妤。
42. 2016年功能性材料研討會暨科技部專題研究計畫成果發表會論文發表競賽-【Poster A有機材料】佳作,教師:陳澄河,莊承鑫。學生:林瑩貞,論文名稱:PANDB/γ-Al2O3導電奈米複合材料之製備。
43. 萬潤2016創新創意競賽,最佳潛力獎,線型金屬3D列印機。
44. 萬潤2016創新創意競賽,佳作獎,具辨識黏膜下軟硬度之筆型口腔鏡。
45. 2017ISSMD& 22nd SACST 2017國際智慧醫療診斷器材研討會暨第二十二屆台灣化學感測器科技研討會,Best Oral Presentation Award(第一名),樣品離子濃度對於阻抗型免疫感測器之影響因子探討,莊承鑫、黃廷圻、Muhanmmad Omar Shaikh、吳定峰。
46. 第11屆龍騰微笑創業競賽-具力量回饋口腔鏡(D-Touch)佳作獎。
47. 第一屆台積設備創意競賽(TSMC Equipment Innovation Competition ),台灣工業4.0探索隊,亞軍(第二名),莊承鑫、杜翌群、林啟瑞、翁璿凱、洪瑩儒、邱仲逸、陳競一。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
期刊論文 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.
Chuang, C. H. and Huang,
J. S., “Effects of solid distribution on the elastic buckling of honeycombs”,
International Journal of Mechanical Science, 44 (7):1429-1443, Jul
2002. (SCI, Impact Factor=0.906) 2.
Chuang, C. H. and Huang,
J. S., “Elastic moduli and plastic collapse strength of hexagonal honeycombs
with Plateau borders”, International Journal of Mechanical Science, 44
(9):1827-1844, Sep 2002. (SCI, Impact Factor=0.906) 3.
Chuang, C. H. and Huang,
J. S., “Theoretical expressions for describing the stiffness and strength of
regular hexagonal honeycombs with Plateau borders”, Materials and Design,
24 (4):263-272, Jun 2003. (SCI, Impact Factor=0.603) 4.
Fei-Bin Hsiao, Chun-Ping
Jen, Di-Bao Wang, Cheng-Hsin Chuang and Yung-Chun Lee, “An Anlytical
Modeling of Heat Transfer for Laser-Assited Nanoimprinting Processes”, Computational
Mechanics 37 (2): 173-181 Feb 2006. (SCI, Impact Factor=0.764) 5.
Fei-Bin Hsiao, Yung-Chun
Lee, Cheng-Hsin Chuang, Chun-Yi. Lin, “ Parametric Investigation of
Laser-Assisted Direct Imprint (LADI) Technique“, Material Science Forum
505-507:307-312, Jan 2006. (SCI Impact Factor=0.498) 6.
Huei-Sheng Huang1,
Zi-Miao Liu1, Ling Ding, Wen-Chang Chang, Pei-Yin Hsu, Shu-Hui Wang,
Ching-Chi Chi and Cheng-Hsin Chuang, “Opposite effect of ERK1/2 and JNK on
p53-independent p21WAF1/CIP1 activation involved in the arsenic
trioxide-induced human epidermoid carcinoma A431 cellular cytotoxicity”, Journal
of Biomedical Science 13 (1):113–125, Jan 2006. (SCI, Impact
Factor=1.995) 7.
Di-Bao Wang, Fei-Bin
Hsiao, Cheng-Hsin Chuang and Yung-Chun Lee, “Algorithm Optimization in
Molecular Dynamics Simulation” Computer Physics Communications, 177
(2007) 551–559, 1 October 2007. (SCI, Impact Factor=1.595) 8.
Y.-C. Lee, F.-B. Hsiao, C.-H.
Chuang, J.-Y. Ruan, S. H. Chang, “Investigation on Laser Assisted Direct
Imprinting Parameters for Fabricating Micro- and Nano- Structures, “Japanese
Journal of Applied Physics 47(6), pp.5174-5177, July 2008. (SCI,
Impact Factor=1.247) 9.
Chen-Zhong Li,Won-Bang
Choib, Cheng-Hsin Chuang, “Size effects on the photoelectrochemical
activities of single wall carbon nanotubes”, Electrochimica Acta, 54
(2008) 821–828. (SCI, Impact factor=2.848) 10. Te-Hua
Fang, Tong Hong Wang, Shao-Hui Kang, Cheng-Hsin Chuang, “Indentation
deformation of mesoporous anodic aluminum oxide”, Current Applied Physics,
9 (2009) 880-883. (SCI, Impact factor=1.291) 11. Cheng-Hsin
Chuang, You-Ming Hsu and Chen-Che Yeh, "The Effects of Nanoparticles
Uptaken by Cells on Electrorotation", ELECTROPHORESIS, 30 (2009)
1449-1456. (SCI, Impact factor=3.609) 12. Cheng-Hsin
Chuang, You-Ming Hsu, Ching-Hua Wei, “The Effects of Microstructures on
Dielectrophoretic Chip for Trapping of Particles”, ELECTROPHORESIS, 30
(2009) 3044-3052. (SCI, Impact factor=3.609) 13. 莊承鑫、陳志緯,“可撓式觸覺感測器之發展與未來”,電子月刊174 (2010) 80-94 January
2010. 14. Cheng-Hsin
Chuang, Jin-Yao Lai and Chin-Hung Wang, “Flexible Microspeaker Using Bimorph
Piezoelectric Transducer”, Journal of
Advanced Engineering Vol. 5, No. 1, pp. 21-26, January 2010. 15. Cheng-Hsin
Chuang, Wen-Hui Li and Shin-Li Lee, “Parametric Study of Flip-Chip Packaging
for an MEMS Device with Diaphragm”, Journal
of Microsystem Technologies (2011) 17:669–675 (SCI, IF=1.025) 16. C.
H. Chuang, S. W. Tsai, J. F. Lin and C. P. Chen, “Fabrication of
Multi-functional Optical Films by Using a UV-Curing Roll-to-Roll System”, Japanese Journal of Applied Physics,
50 (2011) 06GK01. (SCI, IF=1.138) 17. A.R.
Mohd Syaifudin, S. C. Mukhopadhyay, P. L. Yu, Michael J. Haji-Sheikh,
Cheng-Hsin Chuang and Yao-Wei Huang, “Measurements and Performance Evaluation
of Novel Interdigital Sensors for Different Chemicals Related to Food
Poisoning”, IEEE Sensors Journal,
accepted. (SCI, IF=1.581) 18. C.
H. Chuang, Y. W. Huang, Y. T. Wu and T. F. Wu, “A Programmable
Dielectrophoretic Chip for Cell Manipulations”, Japanese Journal of Applied Physics, 50 (2011) 06GL11. (SCI,
IF=1.138) 19. Cheng-Hsin
Chuang, Yi-Rong Liou, Ming-Yuan Shieh, “Foot Pressure Mapping System for a
Biped Robot”, International Journal of
Earth Sciences and Engineering, Vol. 04, No 04 - Spl, July 2011, pp.
10-18. (EI, IF=0.2334) 20. Cheng-Hsin
Chuang, Yao-Tung Wu and Yao-Wei Huang, “Dielectrophoretic Chip with
Multilayer Electrodes and Micro-cavity Array for Trapping and Programmably
Releasing of Single Cells”, Biomedical
Microdevices, accepted. (SCI, IF=3.386) 21. Cheng-Hsin
Chuang, Yi-Rong Liou, Ming-Yuan Shieh, Jian-Shen Chen, “The Pressure Map of
Foots for Biped Robot based on the Flexible Tactile Sensor Array”, Journal of Advanced Engineering Vol.
6, No. 4, pp. 247-253 / October 2011. 22. Cheng-Hsin
Chuang, Yi-Rong Liou, Ming-Yuan Shieh, “Flexible Tactile Sensor Array for
Foot Pressure Mapping System in a Biped Robot”, submitted to Smart Structures and Systems. 23. Cheng-Hsin Chuang, Yao-Wei Huang, “Condensation of Fluorescent Nanoparticles using a DEP Chip with a Dot-electrode Array”, Microelectronic Engineering, Vol. 97, pp. 317-323, 2012, DOI:10.1016/j.mee.2012.04.015 (SCI, Impact Factor=1.224) (ENGINEERING, ELECTRICAL & ELECTRONIC: 129 /249) (ISSN: 0167-9317)
24. Chih-Liang Chu, Tzu-Yao Tai, Yun-Hui Liu, Chin-Tu Lu, Chen-Hsin Chuang and Hong-We Liao, “Development of High-precision Micro CNC Machine with Three-dimensional Measurement System”, International Journal of Automation and Smart Technology, Vol. 2 (2), pp. 95-101, 2012, DOI: 10.5875/ausmt.v2i2.138. (ISSN: 2223-9766) .
25. Cheng-Hsin Chuang, Yi-Rong Liou and Chih-Wei Chen, “Detection System of Incident Slippage and Friction Coefficient Based on a Flexible Tactile Sensor with Structural Electrodes”, Sensors & Actuators: A. Physical, Vol. 188, pp. 48-55, 2012/09, DOI:10.1016/j.sna.2012.02.010. (SCI, Impact Factor=1.903) (ENGINEERING, ELECTRICAL & ELECTRONIC:68/249) (ISSN: 0924-4247) . 26. Ming-Yuan Shieh, Chien-Sheng Chen, Chen-Hsin Chuang, Yi-Rong Liou, Jeng-Han Li, “Gait detection based stable locomotion control system for biped robots”, Computers & Mathematics with Applications, Vol. 64(5), pp. 1431-1440, 2012/09. DOI:10.1016/j.camwa.2012.03.090 (SCI, Impact Factor=1.697)( MATHEMATICS, APPLIED: 26/257) (ISSN: 0898-1221).
27. Cheng-Hsin Chuang, Jing-Wei Ju, Yao-Wei Huang, “ Virtual Microchannels for Focusing and Guiding Fluorescent Microbeads Using Dielectrophoretic Force,” Journal of Southern Taiwan University of Science and Technology, Vol. 37, No. 3, pp. 67-74, (2012).
28. Cheng-Hsin Chuang, Hsun-Pei Wu, Yao-Wei Huang, Cheng-Ho Chen, “Enhancing of Intensity of Fluorescence by DEP Manipulations of Polyaniline-Coated Al2O3 Nanoparticles for Immunosensing,” Biosensors & Bioelectronics, Vol. 48, pp. 158-164, 2013/10/15. DOI: 10.1016/j.bios.2013.03.064 (SCI, Impact factor: 6.409) (BIOPHYSICS: 7/73) (ISSN: 0956-5663).
29. Shao-Hui Kang, Te-Hua Fang, Zheng-Han Hong, Cheng-Hsin Chuang, “Mechanical properties of free-standing graphene oxide,” Diamond & Related Materials, Vol. 38, pp. 73-78, 2013/09. DOI:10.1016/j.diamond.2013.06.016 (SCI, Impact Factor=1.919)(MATERIALS SCIENCE, MULTIDISCIPLINARY: 92/260)(ISSN: 0925-9635).
30. Cheng-Hsin Chuang, Jing-Wei Ju, Yao-Wei Huang, “Enhancing Fluorescent Response of Immunosensing by a DEP Chip with Transparent Electrodes and Microcavities Array,” Micro & Nano Letters, Vol. 8(10), pp. 659-663, 2013/10. DOI: 10.1049/mnl.2013.0439 (SCI, Impact Factor=0.853) (NANOSCIENCE & NANOTECHNOLOGY:71/80) (ISSN: 1750-0443).
31. Cheng-Hsin Chuang, Yao-Wei Huang, “Multi-step Manipulations of PMMA Submicron Particles Using Dielectrophoresis,” ELECTROPHORESIS, Vol. 34 (22-23), pp. 3111-3118, 2013/9. DOI: 10.1002/elps.201300258 (SCI, Impact factor=3.028)(BIOCHEMICAL RESEARCH METHODS: 24/79)(ISSN: 0173-0835).
32. 莊承鑫、李讚修、呂昆峰、穆建良,“開發具組織軟硬度辨識之壓電式軟性觸覺感測器”, 科儀新知, Vol. 197, pp. 36-45 December 2013. (ISSN: 1019-5440). 33. Shao-Hui Kang, Te-Hua Fang, Tao-Hsing Chen, Yu-Jen Hsiao, Zheng-Han Hong, Cheng-Hsin Chuang, Lucio Riccobono, “Size effect on mechanical properties of TiO2 capped nanotubes investigated using in situ transmission electron microscopy,” Microsystem Technologies, Vol. 20(3), pp. 515-520, 2014. DOI :10.1007/s00542-013-1939-0. (SCI, Impact Factor=0.875) (ENGINEERING, ELECTRICAL & ELECTRONIC: 153/249) (ISSN: 0946-7076).
34. Cheng-Hsin Chuang, Yuan-Chu Yu, Da-Huei Lee, Ting-Feng Wu, Shih-Min Chen, Hsun-Pei Wu, Yao-Wei Huang, “ Miniaturization of immunoassay by using a novel module-level immunosensor with Polyaniline-modified nanoprobes that incorporate impedance sensing and paper-based sampling,” Microfluidics and Nanofluidics, Vol. 16(5), pp. 869-877, 2014/02. DOI :10.1007/s10404-014-1364-4. (SCI, Impact Factor=2.528) (NANOSCIENCE & NANOTECHNOLOGY: 37/80) (ISSN: 1613-4982).
35. Cheng-Hsin Chuang, Ting-Fe Wu, Cheng-Ho Chen, Kai-Chieh Chang, Jing-Wei Ju and Yao-Wei Huang, “ Lab on a chip for multiplexed immunoassays to detect bladder cancer using multifunctional dielectrophoretic manipulations,” Lab on a chip, Vol.15(14), pp. 3056-64, 2015/8/7. DOI: 10.1039/ C5LC00352K. (SCI, Impact Factor=6.115) (BIOCHEMICAL RESEARCH METHODS:6/79) (ISSN: 1473-0197).
36. 莊承鑫、穆建良、陳嘉文,“軟性壓電式觸覺感測器應用於機器人捉取控制”, 科儀新知, Vol. 204, pp. 21-32 December 2015. (ISSN: 1019-5440).
37. Cheng-Hsin Chuang, Yi-Chun Du, Ting-Feng Wu, Cheng-Ho Chen, Da-Huei Lee, Shih-Min Chen, Tin-Chi Huang, Hsun-Pei Wu, Omar Shaikh Muhammad, “ Immunosensor for the ultrasensitive and quantitative detection of bladder cancer in point of care testing”, Biosensors and Bioelectronics, Vol. 84, 15 October 2016, pp. 126-132, DOI:10.1016/j.bios.2015.12.103, 2015. (SCI, Impact factor: 6.409) (BIOPHYSICS: 7/73) (ISSN: 0956-5663).
38. C.H. Chuang, H.P. Wu, Y.W. Huang, C.H. Chen, T.F. Wu, D.H. Lee, “A Rapid and Sensitive Impedance based Immunosensor utilizing Dielectrophoretic Manipulations of Polyaniline modified Nanoprobes”, IEEE SENSORS JOURNAL, Vol.16 (11) pp. 4166-4173, 2016/3/29. DOI: 10.1109/JSEN.2016.2546954. (SCI, Impact Factor=1.762)(ENGINEERING, ELECTRICAL & ELECTRONIC: 77/249)(ISSN: 1530-437X).
39. Cheng-Hsin Chuang, Tsan-Hsiu Li, I-Chinms Chou and Ying-Juimr Teng “Piezoelectric Tactile Sensor for Submucosal Tumor Detection in Endoscopy ”, Sensors and Actuators A:physical, Vol. 244, pp. 299-309. DOI:10.1016/j.sna.2016.04.20. (SCI, Impact Factor=1.903)( ENGINEERING, ELECTRICAL & ELECTRONIC: 68/249)(ISSN: 0924-4247).
40. Cheng-Hsin Chuang, Wan-Ching Weng, “Real-time monitoring via patch-type piezoelectric force sensors for Internet of Things based logistics,”IEEE Sensors Journal, vol. 16(11), JUNE 1, 2016. DOI: 10.1109/JSEN.2016.2546954. (SCI, Impact Factor=1.889)(ENGINEERING, ELECTRICAL & ELECTRONIC: 77/225)(ISSN:1530-437X).
41. Cheng-Hsin Chuang, Bo-Hsiang Chang, Jian-Ming Chen, Deng-Maw Lu, “Metal-mesh based transparent electrodes using roll-to-sheet ultraviolet soft imprinting”, Micro & Nano Letters, Online ISSN 1750-0443 Available online: 27 June 2016, Vol. 11(10), pp. 572- 576. DOI:10.1049/mnl.2016.0284.
42. Cheng-Ho Chen, Chiao-Jung Ko, Cheng-Hsin Chuang, Ching-Feng Mao, Wei-Tung Liao, Ching-Dong Hsieh, “Synthesis and characterization of polyaniline co-doped with nitric acid and dodecyl benzene sulfonic acid”, Journal of Polymer Research, Vol. 24:10, 2017. 28 December 2016, DOI 10.1007/s10965-016-1175-2. 43. Chi-Sheng Chien, Yu-Chien Hung, Ting-Fu Hong, Chung-Chun Wu, Tsung-Yuan Kuo, Tzer-Min Lee, Tze-Yuan Liao, Huan-Chang Lin, Cheng-Hsin Chuang, “Preparation and characterization of porous bioceramic layers on pure titanium surfaces obtained by micro-arc oxidation process”, Applied Physics A, vol. 123: 204, 2017. DOI 10.1007/s00339-017-0765-0.
44. Cheng-Hsin Chuang, Deng-Maw Lu, Po-Hsiang Wang, Wen-Yu Lee, Muhammad Omar Shaikh, “Antireflective polymer films via roll to roll UV nanoimprint lithography using an AAO mold”, Microsyst Technol, 20 August 2016 / Accepted: 17 January 2017, DOI 10.1007/s00542-017-3299-7.
45. Cheng-Hsin Chuang, Hua-Cheng Chiang, Tsung-Yuan Kuo, “Fine wire-feed metal deposition using laser assisted additive manufacturing”, Jounal of Welding &Cutting, Vol 27(1),pp56-63, 2017. Accepted: March 2017/ ISSN 1018-9394.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
研討會論文 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
國內研討會: 1.
莊承鑫,黃忠信,”運用積分近似法分析變斷面構件之挫曲強度”,第二十四屆全國力學會議,桃園中壢Dec
2000。 2.
Cheng-Hsin Chuang,
Yung-Chun Lee, Fei-Bin Hsiao, Chuan-Pu Liu, Chun-Ping Jen and Chun-Yi Lin,
“Optimization of Processing Parameters for Laser Assisted Direct Imprint on
Silicon”, 3rd Cross-Strait
Workshop on Nano Science & Technology in HuaLian, Taiwan, April 2004. 3.
Fei-Bin Hsiao, Chun-Ping
Jen, Cheng-Hsin Chuang, Yung-Chun Lee, Chuan-Pu Liu, Di-Bao Wang and Hui-Ju
Hsu, “Simulation of Rapid Melting and Deformation During Laser-Assisted
Direct Nano-Imprinting (LADI)”, 3rd Cross-Strait Workshop on Nano Science &
Technology in HuaLian, Taiwan, April 2004. 4.
Fei-Bin Hsiao, Chun-Ping
Jen, Cheng-Hsin Chuang, Yung-Chun Lee, Chuan-Pu Liu, Di-Bao Wang and Hui-Ju
Hsu, “An Analytical Modeling of Heat Transfer for the Laser-Assisted Direct
Imprint Process”, The 11th National Computational Fluid
Dynamics Conference, Tai-Tung, Taiwan, August, 2004. 5.
Ling Ding, Zi-Miao Liu,
Cheng-Hsing Chuang, Huei-Sheng Huang, “As2O3-stimulated p21WAF1/CIP1
expression through the c-Src/EGFR/Ras/ERK signaling in A431 cells”, The
Thirteenth Symposium on Recent Advances in Cellular and Molecular Biology,
KenTing, Taiwan, February 2005. 6.
Fei-Bin Hsiao、Yung-Chung Lee、Cheng-Hsin
Chuang、Ching-Hwa Wei、Chin-Hung
Wang、Kai-Hsuan Wang、Pei-Chung
Hsiao、You-Ming Hsu, ”DEP Chip with Chess-type
Electrodes Array for Trapping Cells at Single-cell Resolution“, The 9th Nano Engineering and
Microsystem Technology Conference, Tainan, Taiwan, Nov. 2005. 7.
Fei-Bin Hsiao, Hung-Ying
Chen, Cheng-Hsin Chuang, Hui-Ju Hsu, Chiung-I Lee,”The Simulation Study of
Dielectrophoresis Trapping”, The 9th Nano Engineering and Microsystem Technology
Conference, Tainan, Taiwan, Nov. 2005. 8.
Cheng-Hsin Chuang and
Chin-Hung Wang, “The Effects of Residual Stress on Perforated Backplate in
MEMS Microphone”, The 4th Conference
on Precision Machinery and Manufacturing Technology, Kenting, Taiwan, May
2006. 9.
Kai-Hsuan Wang, You-Ming
Hsu, Yung-Chung Lee, Cheng-Hsin Chuang and Fei-Bin Hsiao, “3D Microstructures
Array Single-cell-based DEP Chip”, The 4th Conference on
Precision Machinery and Manufacturing Technology, Kenting, Taiwan, May
2006. 10. Cheng-Hsin
Chuang, Ching-Hua Wei, Chin-Tu Lu, Jian-Tang Lu and Hsu You-Ming, “The
Optimization of Dielectrophoresis Biochip with 3D Bowl-type Microstructures
Array” The 13th National Computational Fluid Dynamics Conference,
Taipei Taiwan, August 2006. 11. Cheng-Hsin
Chuang, Wen-Bin Dong and Wen-Bin Lo, “The Effects of Area and Shape on
Piezoelectric Properties for Flexible Tactile Sensor with Structural
Electrodes”, The 23rd National Conference on Mechanical
Engineering, Tainan, Taiwan, November 2006. 12. Cheng-Hsin
Chuang, Wen-Bin Lo and Wen-Bin Dong, “In-situ Small-force Monitoring System for
Characterization of Piezoelectric Tactile Sensor”, 2007 Intelligent System
Conference on Engineering Applications, Tainan, Taiwan, March 20 2007. 13. Cheng-Hsin
Chuang and Sen-Hsuing Lo, “Analysis of Misalignment for Flip Chip Tape
Bonding by Using Finite Element Method”, 2007 Intelligent System
Conference on Engineering Applications, Tainan, Taiwan, March 20 2007. 14. Cheng-Hsin
Chuang, Jing-Yao Lai and Sen-Hsuing Lo, “The Feasibility study of vehicle
lateral Collision for Triggering side airbag based on Finite Element Method”,
The 5th Conference on Precision Machinery and Manufacturing Technology,
Kenting, Taiwan, May 2007. 15. Cheng-Hsin
Chuang, Chin-Tu Lu, Ching-Hua Wei, Jian-Tang Lu and Hsu You-Ming, “The study
of microfluidic chip with cylindrical micropillars array for trapping of
bioparticles based on electrokinetics” The 14th National
Computational Fluid Dynamics Conference, Nantou Taiwan, August 16-18,
2007. 16. Cheng-Hsin
Chuang and Wen-Bin Lo, “Shape Recognition System by Using Flexible Tactile
Sensor”, The 11th Nano Engineering and Microsystem Technology
Conference, Taichung, Taiwan, August 30-31, 2007. 17. Cheng-Hsin
Chuang and Sen-Hsiung Lo, “The Effects of Boundary Conditions for Flip Chip
Bonding on Film as Finite Element Analysis”, The 11th Nano
Engineering and Microsystem Technology Conference, Taichung, Taiwan,
August 30-31, 2007. 18. Cheng-Hsin
Chuang, Chen-Che Yeh, You-Ming Hsu and Chin-Hung Wang,
“Electrorotation of HL-60 Cells Uptake of Au Nanoparticles in Uniform and
Nonuniform Stationary AC Electric Field”, The 11th Nano
Engineering and Microsystem Technology Conference, Taichung, Taiwan,
August 30-31, 2007. 19. Cheng-Hsin
Chuang, Jin-Yao Lai, Chin-Hung Wang, “R&D of Piezoelectric and Flexible
Microspeaker”, The 24th National Conference on Mechanical
Engineering, Chungli, Taiwan, Nov. 23-24, 2007. 20. Cheng-Hsin
Chuang, Chen-Tai Lu, “Slippage and Direction Sensing Based on Flexible
Tactile Sensor with Structural Electrodes Array”, The 6th Conference on
Precision Machinery and Manufacturing Technology, Kenting, Taiwan, May
23-25, 2007. 21. Cheng-Hsin
Chuang, Chen-Tai Lu, “Flexible Tactile Sensor with Structural Electrode for
Detection of Force Direction”, The 16th National Conference on
Automation Technology, Kaohsiung, Taiwan, June 27-28, 2008. 22. Cheng-Hsin
Chuang, Yu-Chi Chen, Shan-Ching Chen, You-Ming Hsu and Chin-Hung Wang, “DEP
Chip with Arc-Shaped Microelectrodes Array for Speration of Different-size
Particles” The 15th National Computational Fluid Dynamics
Conference, Kaohsiung Taiwan, August 7-9, 2008. 23. 莊承鑫、陳志緯, “具滑動感知之陣列式軟性觸覺感測器於摩擦係數之量測”, 第十三屆奈米工程暨微系統技術研討會,台灣新竹,7月9日∼7月10日,2009年。 24. 莊承鑫、黃舜暉,“壓電式陣列揚聲器之指向性研究”, 第十三屆奈米工程暨微系統技術研討會,台灣新竹,7月9日∼7月10日,2009年。 25. Cheng-Hsin
Chuang and Chun-Nan Lin, “Pattern Transfer by Using A UV Curing Based
Roll-to-Roll System”, International Symposium on Nano Science and
Technology, in Tainan, Taiwan, November 20-21, 2009. 26. Cheng-Hsin
Chuang and Hsing-Sheng Wu, “Thin Layer Coating on a Stainless Roller by Using
An Air-nozzle Based Coating System” International Symposium on Nano
Science and Technology, in Tainan, Taiwan, November 20-21, 2009. 27. Tzu-Yao
Tai, Chih-Wei Chen, Cheng-Hsin Chuang, Shao-Hui Kang, “A New Surface Approach
by Using SPM Discharge Lithography Method”, International Symposium on Nano Science and Technology, in
Tainan, Taiwan, November 20-21, 2009. 28. 莊承鑫、林俊男、蔡嵩玟,“紫外光固化滾印系統於微結構轉印之探討”, 2010 精密機械與製造科技研討會,台灣屏東,2010年 5 月22
- 23日。 29. 莊承鑫、吳幸昇、蔡嵩玟,“利用噴流式旋轉塗佈系統製作PDMS薄膜於金屬滾筒”, 2010 精密機械與製造科技研討會,台灣屏東,2010年 5 月22
- 23日。 30. 莊承鑫、劉一融、謝銘原、陳建升,”軟性陣列式觸覺感測器應用於雙足機器人之足部壓力感知”, 2010第十八屆全國自動化科技研討會,臺灣中壢,中原大學,6月25-26日,2010年。(機電整合最佳論文佳作) 31. 莊承鑫、蔡嵩玟、林俊男、林燁敏、陳昌本,“紫外光固化滾印系統於微透鏡陣列轉印之探討”, 第十四屆奈米工程暨微系統技術研討會,台灣高雄,2010年 9 月2
- 3日。 32. 莊承鑫、吳幸昇
、蔡嵩玟
、莊峰富,“利用噴流式旋轉塗佈系統製作PDMS軟性模仁”, 第十四屆奈米工程暨微系統技術研討會,台灣高雄,2010年 9 月2
- 3日。 33. 莊承鑫、黃耀緯、徐佑銘、吳耀東,“整合聚焦與捕捉功能之可程式化介電泳篩選晶片”, 第十四屆奈米工程暨微系統技術研討會,台灣高雄,2010年 9 月2
- 3日。 34. 莊承鑫、黃舜暉,” 具指向性之陣列式壓電揚聲器研究”,第十四屆奈米工程暨微系統技術研討會,台灣高雄,2010年 9 月2
- 3日。 35. Cheng-Hsin
Chuang, Yao-Wei Huang and Yao-Tung Wu, “Manipulations and Impedance Sensing
of T24 & TSGH8301 Cells Based on Dielectrophoretic Chip”, Symposium on Engineering Medicine and
Biology Applications (SEMBA), July 08 - 10, 2011, Kaohsiung, Taiwan. 36. 莊承鑫、林育芸、莊峰富、林燁敏、陳昌本,”熱壓滾印製程應用於大面積轉印微結構至可撓式基材”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年 9 月6
- 7日。 37. 莊承鑫、盧燈茂、黃一軒、李新立,” 黏著膠材種類與厚度對微機電式麥克風晶片於Chip-on-Board封裝製程之影響”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年 9 月6
- 7日。 38. 莊承鑫、吳熏培、陳澄河、吳佩蓉,”具導電聚苯胺薄膜之可撓式酸鹼值感測器”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年 9 月6
- 7日。(會議優秀壁報論文) 39. 莊承鑫、朱敬威、黃耀緯、吳熏培,”運用介電泳晶片製作生物奈米粒子陣列”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年 9 月6
- 7日。 40. 吳熏培、陳澄河、吳佩蓉, “具導電聚苯胺薄膜之可撓式酸鹼值感測器”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年 9 月6-7日。(最佳論文海報) 41. 莊承鑫、盧燈茂、黃一軒、李新立, “黏著膠材種類與厚度對微機電式麥克風晶片於Chip-on-Board封裝製程之影響”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年9月6-7日。
42. 莊承鑫、林育芸、莊峰富、林燁敏、陳昌本, “熱壓滾印製程應用於大面積轉印微結構至可撓式基材”, 第十五屆奈米工程暨微系統技術研討會,台灣台北,2011年9月6-7日。 43. 莊承鑫、蘇琬婷、朱敬威、黃耀緯、任春平, “介電泳陣列晶片於生物奈米粒子操控與免疫分析應用”,中國機械工程學會第二十九屆全國學術研討會,台灣高雄,2012年12月7-8日。
44. 莊承鑫、穆建良、呂昆峰、林晉廷, “可感知靜態力與動態滑動之軟性觸覺感測器”, 中國機械工程學會第二十九屆全國學術研討會,台灣高雄,2012年 12月7-8日。 45. 莊承鑫、張詠新、黃景德、任春平、陳茗毓, “利用微粒子自組裝製作半圓球亂數陣列結構之軟性模仁與擴散膜轉印”, 中國機械工程學會第二十九屆全國學術研討會,台灣高雄,2012年12月7-8日。 46. 莊承鑫、簡弘量、陳澄河、王聖璋, “利用奈米模板製備導電高分子奈米管陣列結構”, 大葉大學2012年奈米技術與材料研討會,台灣彰化,2012年12月14日 47. 莊承鑫、簡弘量、盧燈茂,“以奈米模板製備導電高分子探針並應用於免疫分析”,2013精密機械與製造科技研討會,台灣屏東,2013年05月24-26日。 48. 莊承鑫、賴炯憲、盧燈茂,“壓電式同軸雙聲道平面揚聲器”,2013精密機械與製造科技研討會,台灣屏東,2013年5月24-26日。 49. 莊承鑫、王柏翔、李文妤, “低成本轉印具次波長結構之十吋抗反射膜”,第十七屆奈米工程暨微系統技術研討會,2013年 8 月22 - 23日,台灣臺中。 50. 莊承鑫、陳建銘、張詠新, “開發LED照明用擴散膜之軟性滾筒模仁技術”,第十七屆奈米工程暨微系統技術研討會,2013年8月22-23日,台灣臺中。 51. 莊承鑫、李讚修、呂昆峰,“應用軟性觸覺感測器辨別黏膜下組織軟硬度”,第十七屆奈米工程暨微系統技術研討會,2013年 8 月22 - 23日,台灣臺中。(研討會最佳論文)
52. 莊承鑫、余遠渠、李大輝、陳仕旻、吳熏培、黃耀緯、任春平,“可拋式聚苯胺奈米探針免疫晶片與微型化阻抗感測模組之系統整合”,第十七屆奈米工程暨微系統技術研討會,2013年8月22-23日,台灣臺中。
53. 莊承鑫、陳澄河、吳定峰、張凱傑、朱敬威、黃耀緯、任春平,“具透明電極之陣列式介電泳晶片應用於膀胱癌免疫檢測”,第十七屆奈米工程暨微系統技術研討會,2013年8月22-23日,台灣臺中。(研討會論文佳作)
54. Chih-Liang Chu, Chin-Tu Lu, Tzu-Yao Tai, Yun-Hui Liu, Chen-Hsin Chuang, Hung-Chi Chen, Hong-Wei Liao, “Development of high-precision micro CNC machine with three-dimensional measurement system and high-precision coplanar platform”, The 12th International Conference on Automation Technology, November 01-03, 2013, Tainan, Taiwan.
55. C.-H. Chuang, K.-C. Chang, C.-H. Chen, T.-F. Wu, Y.-W. Huang, C.-P. Jen, “Microfluidic-based Immunoassay Using Dielectrophoretic Manipulations of Nanoprobes”, The 12th International Symposium on Advanced Technology (ISAT-12), Tainan, Taiwan, November 13-15, 2013.
56. Cheng-Hsin Chuang, Yuan-Chu Yu, Da-Huei Lee, Ting-Feng Wu, Shih-Min Chen, Hsun-Pei Wu, “Label-free Impedance Biosensor for Bladder Cancer Cell Lysate based on PANDB-modified Nanoprobes”, The 12th International Symposium on Advanced Technology (ISAT-12), Tainan, Taiwan, November 13-15, 2013.
57. 莊承鑫、余遠渠、翁琬晴、朱彩葉、黃耀緯、任春平、盧昕宏,“具含水感測之自動化綠建築植物灑水系統”,2014 精密機械與製造科技研討會,2014年 5 月23 - 25日,台灣屏東。
58. 莊承鑫、盧燈茂、張詠新、陳建銘,“開發不規則微結構光學擴散膜之滾印製程”,2014 精密機械與製造科技研討會,2014年 5 月23 - 25日,台灣屏東。
59. 莊承鑫、穆建良、陳嘉文、王明賢,“具辨識三軸動態力之軟性壓電式觸覺感測器”,第十八屆奈米工程暨微系統技術研討會,2014年 8 月21 - 22日,台灣臺南。
60. 莊承鑫、余遠渠、李大輝、陳仕旻、吳熏培、黃耀緯、任春平,“可攜式阻抗免疫感測模組於膀胱癌生物標記檢測”,第十八屆奈米工程暨微系統技術研討會,2014年 8 月21 - 22日,台灣臺南。 61. 莊承鑫、陳澄河、吳定峰、Van Nhan Vo、張龍右、張凱傑,“運用導電碳黑奈米探針於電性感測免疫晶片”,第十八屆奈米工程暨微系統技術研討會,2014年 8 月21 - 22日,台灣臺南。
62. 莊承鑫、李讚修、呂昆峰、李建進,“內視鏡用微型軟硬度感測器之開發”,第十八屆奈米工程暨微系統技術研討會,2014年 8 月21 - 22日,台灣臺南。 63. 莊承鑫、盧燈茂、王柏翔、李文妤,“以連續滾印技術製作具奈米結構之抗反射膜”,第十八屆奈米工程暨微系統技術研討會,2014年 8 月21 - 22日,台灣臺南。
64. 莊承鑫、吳定峰、陳澄河、余遠渠、李大輝、李永春、陳仕旻、吳熏培、簡弘量,“可攜式阻抗感測模組搭配FPGA平台建立免疫分析監測系統”,第十八屆全國自動化科技研討會,2014年11月14-15日,台灣雲林。 65. 洪毓?、郭?源、?基胜、庄承鑫、李?民,“以微弧氧化于?金?上制?具生物活性之多孔陶瓷氧化?研究”,京台兩地化工前沿領域學術研討會,2014 年7月10-17日,大陸北京。 66. C.H. Chuang, T.H. Li, I.C. CHOU, and Y.J. TENG, " Endoscopic Detection of Tissue Hardness based on Miniaturized Tactile Sensor, The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, Taiwan, Tainan, October 31-November 2. 67. 陳仕旻、吳熏培、簡弘量、莊承鑫、陳澄河、吳定峰、李大輝、李永春, "以FPGA平台開發可攜式阻抗感測模組應用於介電泳免疫晶片" 2014年全國自動化科技研討會( The 22th Conference on Automation Technology), 台灣雲林, November 14~15. 68. 莊承鑫、吳定峰、陳澄河、李大輝、李永春、陳仕旻、吳熏培, " Miniaturized Immunoassay System based on Impedance Sensing", 2014 SEMBA研討會(Symposium on Engineering, Medicine and Biology Applications), 高雄,台灣, 2015/1/15-17. 69. Cheng-Hsin Chuang, Da-Huei Lee, Ting-Feng Wu, Cheng-Ho Chen, Shih-Min Chen, Hsun-Pei Wu,“Portable impedance-based sensing system for immunoassay of bladder cancer lysate”, IEEE-NANOMED 2014 for Memorial Symposium for Prof. Fei-Bin Hsiao, Kaohsiung, Taiwan, November 09 - 12. 70. C.H. Chuang, C.H. Chen, T.F. Wu, S.M. Chen, K.C. Chang and H.P. Wu, "Miniaturized Immunoassay System based on Impedance Sensing and Dielectrophoretic Manipulations of Nanoprobes, THE 1ST INNOVATION FORUM OF ADVANCED EDUCATION (IFAEE, iΦ) New Frontiers in Advanced Engineering, Japan, Tokyo, October 31-November 3.(2008)。 71. 莊承鑫、陳建銘、張博翔、陳世彧、陳郁婷," 連續式紫外光固化滾對板自動化設備製作OGS觸控感測薄膜", 全國大專院校智動化設備創作獎比賽, 台灣台中, 7月23, 2015.
72. 莊承鑫、薛宇翔、李讚修、周宜錦、鄧穎叡, "開發可辨識黏膜下假腫瘤組織硬度之內視鏡附件", 19屆奈米工程暨微系統技術研討會,台灣台北 8月13-14, 2015.
73. 莊承鑫、盧燈茂、張博翔、陳建銘, "運用紫外光固化滾對板轉印技術開發觸控感測", 19屆奈米工程暨微系統技術研討會,台北台灣 8月13-14, 2015.
74. 莊承鑫、王愷群、王柏翔、盧燈茂, "利用奈米轉印技術製作具次波長結構之抗反射玻璃", 19屆奈米工程暨微系統技術研討會,台北台灣 8月13-14, 2015.
75. 莊承鑫、黃廷圻、陳仕旻、吳定峰、陳澄河, "阻抗免疫感測晶片應用於檢測人工尿液之膀胱癌生物標記", 19屆奈米工程暨微系統技術研討會,台北台灣 8月13-14, 2015.
76. 莊承鑫、黃中琳、翁琬晴、李大輝、張萬榮," 應用於物流監控之貼片式壓電薄膜感測器", 19屆奈米工程暨微系統技術研討會,台北台灣 8月13-14, 2015.
77. 莊承鑫, 盧燈茂, 張龍右, 朱沛妤, Muhammad Omar Shaikh, 陳澄河, 吳熏培, "紙型電化學阻抗式免疫分析應用於尿白蛋白檢測", 2016第21屆台灣化學感測器科技研討會(21th Symposisum of ACST), 台灣中興 5月21-22日, 2016.
78. 莊承鑫、陳嘉文、洪瑩儒,“具二維高解析度之超聲波觸覺感測器於接觸力量的量測”2016 PMMT 精密機械與製造科技研討會, 台灣墾丁,5月21-22日,2016。
79. Cheng-Hsin Chuang, Muhammad Omar Shaikh, "Rapid and multiplexed paper based calorimetric immunosensor for early diagnosis of Chronic Kidney Disease ", 2016 功能型材料研討會, 台灣台南 6月3日,2016.
80. 莊承鑫、盧燈茂、黃中琳、潘正堂、林煌山、葉哲源, “結合靜電紡絲技術開發可撓式PVDF纖維觸控布料”第二十屆奈米工程暨微系統技術展覽會,台灣新竹 8月25-26日, 2016. 81. 莊承鑫、陳嘉文、洪瑩儒,“具薄膜場效電晶體陣列的超聲波觸覺感測器於接觸力量的量測”,第二十屆奈米工程暨微系統技術展覽會,台灣新竹 8月25-26日, 2016.
82. 莊承鑫、盧燈茂、張博翔、李懋靖,“以UV壓印技術製作之金屬網格應用於OLED照明”,第二十屆奈米工程暨微系統技術展覽會, 台灣新竹 8月25-26日, 2016.
83. Cheng-Hsin Chuang, Ting-Chi Huang, Ting-Feng Wu, and Muhammad Omar Shaikh, “LABEL FREE IMPEDIMETRIC IMMUNOSENSOR FOR DETECTION OF BLADDER CANCER FROM CLINICAL URINE SAMPLES”, 2016 INTERNATIONAL SYMPOSIUM ON NOVEL AND SUSTAINABLE TECHNOLOGY, Tainan City, TAIWAN, October 6-7, 2016.
84. 莊承鑫、盧燈茂、洪瑩儒, “雙感測觸覺感測器於手術系統之接觸力感測”, 中國機械工程學會第三十三屆全國學術研討會, 2016/12/3~4,國立臺灣大學 台北。
85. 莊承鑫、杜翌群、薛宇翔、林祺茂、許幟帆、歐俊巖, “具辨識黏膜下軟硬度之筆型口腔鏡”, 中國機械工程學會第三十三屆全國學術研討會, 2016/12/3~4, 國立臺灣大學 台北。
86. 莊承鑫、周宜錦、郭聰源、江驊晟,“雷射熱源應用於金屬細線之積層製造研究”, 台灣銲接協會一○五年會員大會暨論文發表會, 國立高雄應用科技大學 高雄 台灣, 2016, 11月4號。
87. 莊承鑫、黃中琳、李佩融、陳志勇、張惟閔、Muhammad Omar Shaikh “開發可拉伸式軟性PVDF纖維智慧布料應用於監測生命現象”,2017 PMMT精密機械與製造科技研討會, 2017/05/19~21, 福華大飯店 屏東。
88. 莊承鑫、王承安、黃中琳、張萬榮、李大輝、Muhammad Omar Shaikh “壓電式薄膜感測器對於溫度之可靠度測試”, 2017 PMMT精密機械與製造科技研討會, 2017/05/19~21, 福華大飯店 屏東。
89. 莊承鑫、江驊晟、陳慶嘉、周宜錦、郭聰源、Muhammad Omar Shaikh“送線型雷射金屬積層製造技術開發”, 2017 PMMT精密機械與製造科技研討會, 2017/05/19~21, 福華大飯店 屏東。
90. 莊承鑫、朱沛妤、Muhammad Omar Shaikh、吳熏培、王振乾, “簡易型拋棄式阻抗免疫晶片應用於慢性腎臟病之檢測”, 2017國際智慧醫療診斷器材研討會暨第22屆台灣化學感測器協會研討會, 2017/5/20, 國立成功大學 臺南。 91. 莊承鑫,黃廷圻,M. O. Shaikh and 吳定峰, “樣品離子濃度對於阻抗型免疫感測器之影響因子探討”, 2017國際智慧醫療診斷器材研討會暨第22屆台灣化學感測器協會研討會, 2017/5/20, 國立成功大學 臺南。
國際會議論文: 1.
Chuang, C. H. and Huang,
J. S., “Mechanical Properties of Honeycombs with Plateau Borders”, Ninth
International conference on Composites Engineering (ICCE/9), San Diego,
California, July 2002. 2.
Chuang, C. H. and Liu,
C. P., “Fabrication of Nanoscale Honeycombs on SOI Wafer by Focused Ion
Beam”, Nanomaterials and Nanomanufacturing International Conference in
London, UK, Dec 2003. 3.
Cheng-Hsin Chuang,
Chuan-Pu Liu and Lian-Chong Hsu, “Development of Novell PLED by
Nanoimprinting”, US Air Force/Taiwan Nanoscience Initiative Workshop in
Maui, Feb 2004. 4.
Fei-Bin Hsiao, Yung-Chun
Lee, Chuan-Pu Liu, Cheng-Hsin Chuang, Chun-Ping Jen, Di-Bao Wang, Shang-En
Wu, Chun-Yi Lin and Hui-Ju Hsu, “Fabrication and Simulation of Nanostructures
on Silicon by Laser Assisted Direct Imprint Technique”, International
Workshop on Nanomechanics in California, July 2004. 5.
Chuan-Pu Liu, Yung-Chun
Lee, Fei-Bin Hsiao, Cheng-Hsin Chuang, Chun-Ping Jen, Shang-En Wu and Chun-Yi
Lin, “Structure Evolution of Nanopatterning on Silicon by Laser Assisted
Direct Imprint”, IUMRS International Conference in Asia in HsinChu,
Taiwan, Nov 2004. 6.
Chuan-Pu Liu, Yung-Chun
Lee, Fei-Bin Hsiao, Cheng-Hsin Chuang, Shang-En Wu and Chun-Yi Lin,
“Characterization of material evolution upon Laser Assisted Direct
Imprinting”, Inter-Pacific Workshop on Nanoscience and Nanotechnology in
HK, Nov 2004. 7.
Yung-Chun Lee,
Cheng-Hsin Chuang, Chuan-Pu Liu, Fei-Bin Hsiao, Chun-Yi Lin, “A Dynamic Model
for Laser Assisted Direct Imprinting Process”, Inter-Pacific Workshop on
Nanoscience and Nanotechnology in HK, Nov 2004. 8.
Yung-Chun Lee,
Cheng-Hsin Chuang, Chuan-Pu Liu, Fei-Bin Hsiao, Chun-Yi Lin, “Modeling of
Laser Assisted Direct Imprinting Process Based on Pulsed Laser Heating and
Elastodynamic Theory”, NSTI Nanotechnology Conference and Trade Show,
Anaheim, California, May 2005. 9.
Fei-Bin Hsiao, Di-Bao
Wang and Chun-Ping Jen, Yung-Chun Lee and Cheng-Hsin Chuang, “Numerical
Investigation of Phase-Changing Heat Diffusion for Laser-Assisted DirectNano
Imprint Processing”, NSTI Nanotechnology Conference and Trade Show,
Anaheim, California, May 2005. 10. Fei-Bin Hsiao, Chun-Ping Jen, Cheng-Hsin Chuang, Yung-Chun
Lee, Chuan-Pu Liu, Di-Bao Wang and Hui-Ju Hsu, “Experimental and Numerical
Studies of Laser-Assisted Nanoimprinting Processes with Different Substrate
Materials”, IEEE International Conference on Robotics and Biomimetics
(IEEE ROBIO), in Hong Kong, June 2005. 11. Fei-Bin Hsiao, Yung-Chun Lee, Cheng-Hsin Chuang, Chun-Yi. Lin,
“ Parametric Investigation of Laser-Assisted Direct Imprint (LADI)
Technique“,, 2005 International Conference on Advanced Manufacture, in
Taipei Taiwan, Nov. 2005. 12. Cheng-Hsin Chuang, Huei-Sheng Huang, Yung-Chun Lee, Ling Ding,
Kai-Hsuan Wang, You-Ming Hsu and Fei-Bin Hsiao, “A DEP Cell Trap Device for
Studying Apoptosis of U937 & A431 Cells”, The 2nd International
Meeting on Microsensors and Microsystems, Tainan Taiwan, Jan 2006. 13. Cheng-Hsin Chuang, Yung-Chung Lee, Huei-Sheng Huang, Fei-Bin
Hsiao, “3D Microstructures Array Single-cell-based DEP Chip for Studying
Apoptosis of U937& A431 Cells”, IEEE Int. Conf. on Nano/Micro
Engineered and Molecular Systems, in Zhuhai China, January, 2006. 14. Yung-Chun Lee, Cheng-Hsin Chuang, and Fei-Bin Hsiao, “An
Elastodynamic Modeling of Laser Assisted Direct Imprinting Process”, 19th
International Microprocesses and Nanotechnology Conference, Kanagawa,
Japan, October 2006. 15. Cheng-Hsin Chuang, Ching-Hua Wei, You-Ming Hsu, and Jian-Tang
Lu, “Multilayer Electrodes DEP Chip for Single-cell Level Impedance
Measurement”, The 2nd IEEE
International Conference on Nano/Micro Engineered and Molecular Systems
(IEEE-NEMS), Bangkok, Thailand, January 2007. 16. Cheng-Hsin Chuang, You-Ming Hsu and Chen-Che Yeh, “Microdevice
for Electrorotation of Cells Uptake of Nanoparticles”, International
Conference on Nanoscience & Technology, Beijing, China, June 4-6,
2007. 17. Di-Bao Wang, Fei-Bin Hsiao, Yung-Chun Lee and Cheng-Hsing
Chuang, “Thermal Stress of Substrate in Laser-Assisted Nano-Imprinting
Fabrication Using Molecular Dynamics Simulation”, 7th International Congress on
Thermal Stresses, Taipei, Taiwan, June 4-7, 2007. 18. Cheng-Hsin Chuang, Wen-Bin Dong and Wen-Bin Lo, “Flexible
Piezoelectric Tactile Sensor with Structural Electrodes Array for Shape
Recognition System”, The 6th International Symposium on
Advanced Technology, Tokyo, Japan, November 5-6, 2007. 19. Cheng-Hsin. Chuang, Ching Hua Wei, You-Ming Hsu, Jian-Tang Lu,
and Chen- Che Yeh, “Impedance Analysis of HL-60 Cells Uptake of Au
Nanoparticles by Using DEP Chip with Multi-layer Electrodes and SU-8
Microstructures”, 20th International Microprocesses and
Nanotechnology Conference, Kyoto, Japan, November 5-8, 2007. 21. Cheng-Hsin Chuang, Chen-Che Yeh and You-Ming Hsu, “The Effects
of Nanoparticles Uptaken by HL-60 Cells on Electrorotation in a Nonuniform AC
Electric Field”, 2007 International Symposium on Nano Science and
Technology, Tainan, Taiwan, 8-9 November 2007. 22. Cheng-Hsin Chuang, Chen-Che Yeh, You-Ming Hsu,
“Electrorotation of HL-60 Cells Uptake of Metal and Dielectric Nanoparticles
in a Stationary AC Electric Field”, The 3rd IEEE International Conference on Nano/Micro
Engineered and Molecular Systems (IEEE-NEMS), Sanya Hainan Island, China,
6-9 January, 2008. 23. Cheng-Hsin Chuang, Ching-Hua Wei, You-Ming Hsu, Hsiang-Ching
Chen, Chin-Hung Wang, “Depth Effects of DEP Chip with Microcavities Array on
Impedance Measurement for Live and Dead Cells”, The 3rd IEEE International
Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS),
Sanya Hainan Island, China, 6-9 January, 2008. 24. Fei-Bin Hsiao, Chun-Ping Jen, Yung-Chun Lee, Cheng-Hsin
Chuang, Hsiu-Lan Hsu, “The Experimental Studies of Bio-Particle Trapping
Using Electrodeless Dielectrophoresis”, The 3rd IEEE International
Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS),
Sanya Hainan Island, China, 6-9 January, 2008. 25. Cheng-Hsin Chuang, Chen-Che Yeh, “ Characterization of Electrical Properties of HL-60 Cell
Membrane by Rotating of Cells Uptake of Nanoparticles in A DEP Chip”, International
Symposium on “Nanotoxicology Assessment and Biomedical, Environmental
Application of Fine Particles and Nanotubes” (ISNT2008), Sapporo, Japan,
16-17 June 2008. 26. Cheng-Hsin Chuang, Jin-Yao Lai, Chin-Hung
Wang, “Flexible Microspeaker Based on Bimorph Piezoelectric
Transducer”, The Asia-Pacific Conference on Transducers and Micro-Nano
Technology 2008 (APCOT2008), in Tainan, Taiwan, 22-25 June, 2008. 27. Cheng-Hsin Chuang, You-Ming Hsu and
Chen-Che Yeh, “ Manipulations and Sensing of Single Cell Based on DEP Force
and Impedance Measurement“, 2nd Yellow Sea Rim Workshop on
Explosion, Combustion and other Energetic Phenomena, Kumamoto Japan,
September 9-10, 2008. (Invited talk) 28. Cheng-Hsin Chuang, Wen-Hui Li and Sony Lee, “Thermal Analysis
under Different Packaging Processes for MEMS Device with Diaphragm”, The 3rd
International Microsystems, Packaging, Assembly and Circuits Technology
Conference and the 10th International Conference on Electronics
Materials and Packaging (The 3rd IMPACT and 10th EMAP Joint Conference),
Taipei Taiwan, October 22-24, 2008. 29. Cheng-Hsin Chuang, Wen-Bin Dong and Wen-Bin Lo, “Flexible
Piezoelectric Tactile Sensor with Structural Electrodes Array for Shape
Recognition System”, The 3rd IEEE International Conference on
Sensing Technology 2008 (ICST 2008), Tainan, Taiwan, November 30 –
December 3, 2008. 30. Cheng-Hsin Chunag, Yu-Chi Chen, You-Ming Hsu, Huei-Sheng
Huang, Fei-Bin Hsiao and Chin-Hung Wang, “A DEP Chip with Arc-Shape
Microelectrode Arrays for the Separation of Different-size Particles”, The
4th IEEE International Conference on Nano/Micro Engineered and
Molecular Systems (IEEE-NEMS), Shenzhen, China, 5-8 January, 2009. 31. Cheng-Hsin Chuang, “The Effects of Nanoparticles Uptaken by
Cells on Electrorotation”, The 2nd International Symposium on
Nanostructures, Kusatsu, Japan, 1-3 March, 2009. (Invited talk) 32. Cheng- Hsin Chuang, You-Ming Hsu, Huei-Sheng Huang, Ching-Hua
Wei, Fei-Bin Hsiao, “Impedance Sensing of Bladder Cancer Cells based on a
Single-cell-based DEP Microchip”, IEEE SENSORS 2009 Conference, Christchurch
New Zealand, 25-28 October, 2009. 33. Cheng-Hsin Chuang, Chen-Tai Lu, Te-Hua Fang, “Slippage and
Direction Sensing based on a Flexible Tactile Sensor with Structural
Electrodes”, IEEE SENSORS 2009 Conference, Christchurch New Zealand,
25-28 October, 2009. 34. Cheng-Hsin Chuang, “Force of Nature: Typhoon Disaster in
Asia”, International Workshop on Novel Sensing Technologies and
Instrumentation in Environmental Climate Change Monitoring, Palmerston
North, New Zealand, 30 October, 2009. (Invited talk) 35. Cheng-Hsin Chuang, Yao-Tung Wu, You-Ming Hsu and Ching-Hua
Wei, “Dielectrophoretic Chip with Multilayer Electrodes and Microcavity
Arrays for Trapping and Programmable Releasing of Single Cells”, The 5th
IEEE International Conference on Nano/Micro Engineered and Molecular Systems
(IEEE-NEMS), Xiamen, China, 20-23 January, 2010. 36. Cheng-Hsin Chuang, Wen-Hui Li, Chin-Hung Wang and Shin-Li Lee,
“Parametric Study of Flip Chip Packaging for MEMS Device with Diaphragm”, IEEE
DTIP 2010 (Design, Test, Integration & Packaging of MEMS /MOEMS),
Seville, Spain, 5-7 May 2010. 37. Cheng-Hsin Chuang and Yu-Liang Chen, “Fabrication of Roller
Mold with Spherical Microlens Structure Array based on particles
self-assembly for Roll-to-Roll Process”, The International Conference on
Nanophotonics 2010, Tsukuba Japan, May 30 – June 3, 2010. 38. A.R. Mohd Syaifudin; Subhas Mukhopadhyay; P. Yu; C.H. Chuang ;
Michael J. Haji-Sheikh; Chinthaka Gooneratne; Johnny Vanderford; Y.W. Huang,
“A comparative study of three different design of novel planar interdigital
sensors for food inspections”, The 4th International Conference on Sensing
Technology (ICST 2010), Lecce, Italy, 3-5 June 2010. 39. C. H. Chuang, S. W. Tsai, D. M. Lu, C. P. Chen and Y. M.
Lin,“Fabrication of Complex Optical Film by Using An UV-Curing Roll-to-Roll
System, ” MNC 2010, the 23rd International Microprocesses and
Nanotechnology Conference, Fukuoka, Japan, November 9-12, 2010. 40. C. H. Chuang, Y. W. Huang, Y. M. Hsu, Y. T. Wu and F. B.
Hsiao,“A rogrammable Dielectrophoretic Chip for Cell Manipulations, ” MNC
2010, the 23rd International Microprocesses and Nanotechnology Conference, Fukuoka, Japan, November 9-12,
2010. 41. Cheng-Hsin Chuang, and Zhi-Wei Chen, “Detection of Slippage
and Coefficient of Friction Based on a Flexible Tactile Sensor with
Structural Electrodes”, 2010 Tactile Research Group Meeting (TRG meeting
2010), in St. Louis, Missouri, USA, November 18, 2010. 42. Lydia Anggraini, Ryohei Yamamoto, Yuta Natsume, Hiroshi
Fujiwara, Cheng-Hsin Chuang, Kei Ameyama, “Enhancing Strength and Ductility
of Silicon Carbide using Microstructure Control Produced by MM-SPS”, The
27th International Korea-Japan Seminar on Ceramics, Songdo, Incheon,
Korea, November 24-26, 2010. 43. Cheng-Hsin Chuang, Hsun-Pei Wu and Yao-Wei Huang,
“Manipulations of Fluorescent Particles for Letter Display based on
Dielectrophoresis”, 2010 International Conference on Optics and Photonics
in Taiwan, Tainan, Taiwan Dec. 3-4, 2010. 44. Cheng-Hsin Chuang, Feng-Fu Chuang, “Pattern Transfer by Using A
Thermal Imprinting Roll-to-Roll System”, 2010 International Conference on
Optics and Photonics in Taiwan, Tainan, Taiwan Dec. 3-4, 2010. 45. Cheng-Hsin Chuang
and Yu-Liang Chen,
“Fabrication of a Roller Mold with a 3D Random Microstructure Array Derived
from the Self-Assembly of Glass Beads”, International Conference on
Manufacturing and Engineering Systems (ICMES 2010), Southern Taiwan
University, Taiwan, December 16-18, 2010. 46. Cheng-Hsin Chuang, Ching-Hsun Hung, “AFM Manipulation of
Nanoparticles based on Dielectrophoresis”, The 6th IEEE International
Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS),
Kaohsiung, Taiwan, February 20 – 23, 2011. 47. Cheng-Hsin Chuang, Yao-Wei Huang, Hsun-Pei Wu, Shiou-Yuh Lin,
“Microfluidic Device for Manipulations of PMMA Nanoparticles based on
Dielectrophoresis”, The 6th IEEE International Conference on Nano/Micro
Engineered and Molecular Systems (IEEE-NEMS), Kaohsiung, Taiwan, February
20 – 23, 2011. 48. Cheng-Hsin Chuang, Yi-Rong Liou and Ming-Yuan Shieh, “Foot
Pressure Mapping System for a Biped Robot”, International Engineering
Symposium (IES 2011), Kumamoto
University, Japan, March 3-5, 2011. (Invited Talk) 49. Cheng-Hsin Chuang, “A Dielectrophoretic Chip for Manipulations
of Nanoparticles”, The 4th
International Symposium on Nanostructures (Oz-11), Ritsumeikan University
Kusatsu, Japan, March 6-9, 2011. (Invited Talk) 50. Cheng-Hsin Chuang, Yi-Rong Liou and Ming-Yuan Shieh, “Flexible
Tactile Sensor with Microstructural Electrodes Array on Foot Pressure Mapping
System for a Biped Robot”, The 4th
International Symposium on Nanostructures (Oz-11), Ritsumeikan University
Kusatsu, Japan, March 6-9, 2011. (Best Poster Award) 51. Cheng-Hsin Chuang, Yu-Liang Chen, “Spherical Microstructure
Array on a Steel Roller based on the Self-Assembly of Glass Beads”, The 4th International Symposium on
Nanostructures (Oz-11), Ritsumeikan University Kusatsu, Japan, March 6-9,
2011. (Best Poster Award) 52. Cheng-Hsin Chuang, Yao-Wei Huang and Hsun-Pei Wu
“Manipulations of Nanoparticles by Using Dielectrophoresis”, The 5th Yellow See Rim Workshop on
Explosion, Combustion and other Energetic Phenomena, Okinawa, Japan,
March 10-12, 2011. 53. A.R. Mohd Syaifudin, P.L. Yu and S. C. Mukhopadhyay Michael J.
Haji-Sheikh Cheng-Hsin Chuang, “Novel Interdigital Sensors; Analysis,
Measurement and Evaluations”, 2011
IEEE International Instrumentation and Measurement Technology Conference,
Binjiang, Hangzhou, China, May 10-12, 2011. 54. Cheng-Hsin Chuang, Yi-Hsuan Huang and Shin-Li Lee, “The
Influence of Adhesive Materials on Chip-On-Board Packing of MEMS Microphone”,
IEEE DTIP 2011 (Design, Test,
Integration & Packaging of MEMS /MOEMS), Aix-en-Provence, France, May
11-13, 2011. 55. C.H. Chuang, Y.R. Liou and C.W. Chen, “Detection System of
Incident Slippage and Friction Coefficient Based on a Flexible Tactile Sensor
with Structural Electrodes”, The 16th
International Conference on Solid-State Sensors, Actuators and Microsystems
(TRANSDUCERS’ 11), June 5-9, 2011, Beijing, China. (Oral Presentation) 56. C. H. Chuang, Y. W. Huang, H. P. Wu and J. W. Ju, “Sensitivity
Enhancement of Immunoassay based on DEP Chip with Dot-electrode Array”, The 6th Yellow See Rim Workshop on
Explosion, Combustion and other Energetic Phenomena, Kumamoto, Japan,
September 8-10, 2011. (Invited talk) 57. C. H. Chuang, Y. W. Huang, H. P. Wu and J. W. Ju,
“Condensation of Fluorescent Nanoparticles by DEP Chip with Dot-electrode
Array”, MNE 2011, 37th International
Conference on Micro and Nano Engineering, Berlin, Germany, September
19-23, 2011. 58. A.R. Mohd Syaifudin, S. C. Mukhopadhyay, P.L. Yu, Michael J.
Haji-Sheikh, Cheng-Hsin Chuang “Detection of Natural Bio-Toxins Using an
Improved Design Interdigital Sensors”, IEEE
SENSORS 2011 Conference, Limerick, Ireland, 28-31 October, 2011. 59. Cheng-Hsin Chuang, Hsun-Pei Wu, Cheng-Ho Chen and Peng-Rong
Wu, “Flexible pH Sensor with Polyaniline Layer Based on Impedance
Measurement”, The 5th International
Conference on Sensing Technology (ICST2011), Palmerston North, New
Zealand, Nov. 28th - Dec. 1st, 2011. 60. Cheng-Hsin Chuang, Chin-Ting Lin, Yi-Rong Liou, Kun-Feng Lu, “Measurement of Mechanical Properties for Elastomers by A Piezoelectric Tactile Sensor with Structural Electrode”, Minamata International Symposium ON Environment and Energy Technology (MISSION 2011), 6-8 December, 2011, Kumamoto, Japan.
61. Cheng-Hsin Chuang, Jing-wei Ju, Yao-Wei Huang, Hsun-Pei Wu, “Virtual Microchannels for Focusing and Guiding of Microbeads by Using Dielectrophoretic Force”, Minamata International Symposium ON Environment And Energy Technology (MISSION 2011), 6-8 December, 2011, Kumamoto, Japan.
62. C.-T. Huang, C.-H. Chuang, C.-P. Jen, “Fabrication of Hydrogel-based Antibody Microarray for Immunoassays”, The 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2012), Kyoto, Japan, March 5-8, 2012.
63. C.-H. Chuang, F.-F. Chuang, S.-W. Tsai, Y.-M. Shen, C.-P. Chen, “Nanoimprinting of Sub-wavelength Structure by Using Cone-shape Anodic Alumina Oxide Template for the Enhancement of Solar Cell Energy Conversion Efficiency”, The 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2012), Kyoto, Japan, March 5-8, 2012.
64. C.-H. Chuang, H.-P. Wu, Y.-W. Huang, C.-H. Chen, C.-P. Jen, “Enhancement of Fluorescent Intensity by Using DEP Manipulations of Polyaniline-coated Al2O3 Nanoparticles for Immunosensing”, The 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2012), Kyoto, Japan, March 5-8, 2012.
65. Hsun-Pei Wu, Cheng-Hsin Chuang, Yao-Wei Huang, Chun-Ping Jen, “Interdigital Sensor for Immunoassay Based on the Dielectrophoretic Concentration of Al2O3 Nanoprobes”, The 4th International Symposium on Microchemistry and Microsystems (ISMM 2012) , Hsinchu, Taiwan, June 10-13, 2012.
66. Cheng-Hsin Chuang, Jian-Liang Mu, Ming-Shyan Wang, Chin-Ting Lin, “Flexible Tactile Sensor for Detecting of Incident Slippage and Contact Force”, 2012 CACS International Automatic Control Conference, Yunlin, Taiwan, Nov. 30 - Dec. 2, 2012.
67. C.-H. Chuang, K.-F. Lu, “Measurement of Hardness for Soft Materials by Using Piezoelectric Tactile Sensor”, 3rd International Engineering Symposium (IES 2013), Kumamoto University, Japan, 4-6 March, 2013.
68. C.-H. Chuang, Y.-S. Chang, C.-T. Huang, J.-P. Jen, M.-Y. Cheng, “Diffuser Film with Random Microlens Array Using Roll-To-Roll Process”, 3rd International Engineering Symposium (IES 2013), Kumamoto University, Japan, 4-6 March, 2013.
69. C.-H. Chuang, J.-L. Mu, C.-T. Lin, “An Integrated Flexible Tactile Sensor with Piezoelectric and Piezoresistive Transducers for Detecting Incident Slippage and Contact Force”, 3rd International Engineering Symposium (IES 2013), Kumamoto University, Japan, 4-6 March, 2013.
70. C.-H. Chuang, W.-T. Su, H.-P. Wu, Y.-W. Huang, P.-H. Chen, C.-P. Jen, “Dot Array Chip for Manipulation of Bio-Nanoparticles and Immunosensing”, 3rd International Engineering Symposium (IES 2013), Kumamoto University, Japan, 4-6 March, 2013.
71. C.-H. Chuang, W.-Y. Lee, F.-F. Chuang, “Fabrication of Large-Area Nanostructures on Glass Substrate by Using A Template of Anodization Aluminum Oxide”, 3rd International Engineering Symposium (IES 2013), Kumamoto University, Japan, 4-6 March, 2013.
72. C.-H. Chuang, J.-W. Ju, Y.-W. Huang, C.-P. Jen, F.-B. Hsiao, “Enhancing Fluorescent Response of Immunosensing by a DEP Chip with Transparent Electrodes and Microcavities Array”, The 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2013), Suzhou, China, April 7-10, 2013.
73. C.-H. Chuang, H.-P. Wu, Y.-W. Huang, C.-H. Chen, C.-P. Jen, “Immunoassay using an impedance sensor with PANDB-modified Nanoprobes”, The 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2013), Suzhou, China, April 7-10, 2013.
74. Cheng-Hsin Chuang, Wen-Yu Lee, Feng-Fu Chuang, “Fabrication of Large Area Sub-Wavelength Structure for Anti-Reflection and Self-Cleaning Optical Plate”, Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP 2013), Barcelona, Spain, April 16-18, 2013
75. C.-H. Chuang, K.-F. Lu, “Flexible Tactile Sensor Attached to Laparoscope for Mechanical Characteristics of Soft Materials and Tissues”, The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS’ 13), Barcelona, Spain, June 16-20, 2013.
76. C.-H. Chuang, S.-M. Chen, H.-P. Wu, Y.-C. Yu, D.-H. Lee, Y.-W. Huang, C.-P. Jen, “PROTABLE IMMUNOSENSING SYSTEM FOR POINT-OF-CARE DIAGNOSIS OF BLADDER CANCER USING DISPOSABLE CHIP WITH INTERDIGITAL ELECTRODE”, 2013 International Symposium on Nano Science and Technology (ISNST 2013), Tainan, Taiwan, November 15-16, 2013. (Excellent Award of Poster Competition)
77. C.-H. Chuang, K.-C. Chang, J.-W. Ju, C.-H. Chen, T.-F. Wu, Y.-W. Huang, C.-P. Jen, “ANTIBODY ARRAY BIOCHIP FOR IMMUNOASSAY OF BLADDER CANCER CELL LYSATE BASED ON SILANE-COATED NANOPROBES”, 2013 International Symposium on Nano Science and Technology (ISNST 2013), Tainan, Taiwan, November 15-16, 2013. (Excellent Award of Poster Competition)
78. C.-H. Chuang, H.-L. Chien, “Immunosensor with well-separated Polyaniline Nanowires for Determination of Isoelectric Point based on Electrochemical Impedance Spectroscopy”, The 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2014), Waikiki Beach, Hawaii, April 13-16, 2014.
79. Cheng-Hsin Chuang, Hsun-Pei Wu, Kai-Chieh Chang, Yao-Wei Huang, Chun-Ping Jen, “Enhancing the Sensitivity of Electical Sensing for Immunosensor by Using Polyaniline-modified Nanoprobes and DEP Manipulation”, International Congress on Natural Sciences and Engineering (ICNSE 2014), Kyoto, Japan, May 7-9, 2014.
80. Cheng-Hsin Chuang, Deng-Maw Lu, Po-Hsiang Wang, Wen-Yu Lee, “Fabrication of Anti-reflection Film with Sub-wavelength Structures based on Roll-to-Roll Nanoimprinting”, 13th International Conference on Nanoimprint and Nanoprint Technology (NNT 2014), ANA Crowne Plaza Kyoto, Kyoto, Japan, October 22-24, 2014.
81. C.-H. Chuang and C.-H. Chen,T.-F. Wu, Vo Van Nhan, L.Y. Chang, K.-C. Chang, “Rapid Detection of Cell Lysate Using Impedance Measurement of Immunoreaction Coupled with Conductive Carben Black Nanoprobe”, 2014 International Symposium on Nano Science and Technology, in Tainan, Taiwan, October 17-18, 2014.
82. Cheng-Hsin Chuang, Deng-Maw Lu, Jian-Ming Chen, Bo-Hsiang Chang, "ROLL-TO-ROLL FABRIATION OF MICRO TRENCH STRUCTURE ON PET FILM”, 2014 International Symposium on Nano Science and Technology, in Tainan, Taiwan, October 17-18, 2014.
83. C.-H. Chuang, M.-H. Wang, C.-L. Mu, J.-W. Chen, “Flexible Piezoelectric Tactile Sensor for Sensing of Biaxial Dynamic Lateral Force and Slippage”, 2014 International Symposium on Nano Science and Technology, in Tainan, Taiwan, October 17-18, 2014.
84. Cheng-Hsin Chuang, Deng-Maw Lu, Po-Hsiang Wang, Wen-Yu Lee ,"FABRICATION OF ANTI-REFLECTION FILM BY ROLL-TO-ROLL NANOIMPRINTING", 2014 International Symposium on Nano Science and Technology, in Tainan, Taiwan, October 17-18, 2014.
85. Cheng-Hsin Chuang, Nhan Van Vo, Chun-Ping Jen and Ting-Feng Wu, Cheng-Ho Chen, “Impedance-based immunosensing of bladder cancer cell lysate on a DEP microchip with annular-electrode array and Al2O3 nanoprobes”, 4th International Conference on Bio-Sensing Technology, NATPRT, 里士本, 2015/05-13.
86. Cheng-Hsin Chuang, Deng-Maw Lu, Lung-Yu Chang, Kai-Chieh Chang, Cheng-Ho, Ting-Feng Wu, Muhammad Omar Shaikh and Hsun-Pei Wu, " PAPER BASED IMPEDIMETRIC IMMUNOASSAY FOR LABEL FREE DETECTION OF URINARY ALBUMIN "The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2015), Jongno-gu, Seoul, KOREA, October 25-29, 2015.
87. C.-H. Chuang1, S.-M. Chen, H.-P. Wu," Portable impedance-based immunoassay device for detection of bladder cancer", The 5th International Conference on Optofluidics 2015, Taipei Taiwan July 27-28, 2015.
88. C.H. Chuang, T.H. Li, I.C. Chou, Y.J. Teng, " PIEZOELECTRIC TACTILE SENSOR FOR SUBMUCOSAL TUMOR HARDNESS DETECTION IN ENDOSCOPY" The 18th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2015, Anchorage, Alaska, USA, June 21-26, 2015.
89. Cheng-Hsin Chuang, Ting-Chi Huang, Ting-Feng Wu, and Cheng-Ho Chen, “Quantitative and ultrasensitive impedance a based immunosensors for bladder cancer detection”, 2015 INTERNATIONAL SYMPOSIUM ON NANO SCIENCE AND TECHNOLOGY (ISNST2015), Tainan, Taiwan, October 30-31, 2015.
90. C.-H. Chuang, K.-C. Chang, L.-Y. Chang, and H.-P. Wu, “THREE-DIMENSIONAL PAPER SENSOR FOR MULTIPLEXED IMMUNOASSAY”, 2015 INTERNATIONAL SYMPOSIUM ON NANO SCIENCE AND TECHNOLOGY (ISNST2015), Tainan, Taiwan, October 30-31, 2015.
91. Cheng-Hsin Chuang, Deng-Maw Lu, Bo-Hsiang Chang, “Development of metal mesh film using roll-to-sheet UV embossing technology”, 2015 INTERNATIONAL SYMPOSIUM ON NANO SCIENCE AND TECHNOLOGY (ISNST2015), Tainan, Taiwan, October 30-31, 2015.
92. Cheng-Hsin Chuang, Wan-Ching Weng," Real-Time Monitoring via Patch-Type Piezoelectric Force Sensors for Internet of Thing in Logistics”, The 11th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2016), Matsushima Bay and Sendai MEMS City, Japan, 17-20 April, 2016.
93. C.H. Chuang, H.K. Weng, J.W. Cheng, and M.O. Shaikh “ULTRASONIC TACTILE SENSOR INTEGRATED WITH TFT ARRAY FOR CONTACT FORCE MEASUREMENTS”, The 19th International Conference on Solid-State Sensors, Actuators and Microsystems, (Transducer 2017), June 18-22, 2017 Kaohsiung, Taiwan.
94. Cheng-Hsin Chuang, Chung-Lin Huang, Muhammad Omar Shaikh, Cheng-Tang Pan, Huang-Shan Lin, Je-Yuan Yeh, Da-Huei Lee, and Hsin-Yen Liu, “Smart Textiles Based on Piezoelectric PVDF Fibers Obtained via Hollow Cylindrical Near-Field Eelectrospinning”, 2017 5th Asia Conference on Mechanical and Materials Engineering (ACMME 2017), University of Tokyo, Japan during June 9-11, 2017.
95. Jian-Ping Su, Cheng-An Wang, Yu-Ching Mo, Yu-Xiang Zeng, Wan-Jung Chamg, Liang-Bi Chen, Da-Huei Lee, Cheng-Hsin Chuang, “i-Logistics: An Intelligent Logistics System Based on Internet of Things” 2016 International Conference on Applied System Innovation (ICASI 2016), May 28- June 1, 2016, Okinawa, Japan.
96. Cheng-Hsin Chuang, Deng-Maw Lu, Yi-Chun Du,, Chi-Hsiang Wu, Ying-Ru Hong, Muhammad Omar Shaikh, Chih-Fan Hsu, Shih-Chi Chan, "CONTACT FORCE SENSING BASED ON BIFUNCTIONAL TACTILE SENSOR AND READ-OUT CIRCUIT FOR MINIMALLY INVASIVE SURGERY"2017 International Conference on Mechatronic ,and Environmental Engineering (ICMAEE 2017). May 27-29, Yantai, China, 2017.
97. Cheng-Hsin Chuang, Yi-Chin Chou, Tsung-Yuan Kuo, Hua-Cheng Chiang, Ching-Chia Chen, Muhammad Omar Shaikh, “Fine wire-feed metal deposition using laser assisted additive manufacturing” 2017 World Congress on Micro and Nano Manufacturing, WCMNM 2017, Kaohsiung, Taiwan, March 27~30, 2017.
98. C. H. Chuang, Member, IEEE, T. F. Wu, T. C. Huang, M. O. Shaikh, “Label Free Impedimetric Immunosensor For detection of Bladder Cancer From Clinical Urine Samples”, The 12th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2017), California, USA, April 9-12, 2017.
99. Cheng-Hsin Chuang, "Impedance-based Immunosensor for Point-of-care Diagnostic Testing”, 13th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON 2016), Chiang Mai, Thailand, 28-1 June-July, 2016.
100. Cheng-Hsin Chuang, Deng-Maw Lu, Po-Hsiang Wang, Wen-Yu Lee, “Fabrication of Antireflective Polymer Films with Subwavelength Structures using Roll to Roll Nanoimprint Lithography”, The 18th edition of the Symposium on Design, Test, Integration & Packaging of MEMS and MOEMS (2016 DTIP), Budapest-Hungary, May, 30th - June, 2nd.
101. Cheng-Hsin Chuang, Bo-Hsiang Chang, "Transparent Metal Mesh on Glass Based on Roll to Sheet UV Imprinting Using a PDMS Soft Mold”, The 11th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2016), Matsushima Bay and Sendai MEMS City, Japan, 17-20 April, 2016.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
專書 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. Fei-Bin Hsiao, Yung-Chun Lee, Chuan-Pu Liu, Cheng-Hsin
Chuang, Chun-Ping Jen, Di-Bao Wang, Chun-Yi Lin, “Fabrication and
Simulation of Nanostructures on Silicon by Laser-Assisted Direct Imprint
Technique,” Nanomechanics of Materials and Structures, Springer, edited by
T.J. Juang, P.M. Anderson, M.K. Wu, and S. Hsieh, pp. 181-189, 2005. (ISBN:
978-1-4020-3950-8) 2. Cheng-Hsin Chuang, “Flexible Piezoelectric Tactile Sensors
with Structural Electrode Array”, Recent Advances in Sensing Technology
edited by S. C. Mukhopadhyay et al. LNEE 49, pp. 189-202, Springer-Verlag
Berlin Heidelberg 2009. (ISBN:978-3-642-00577-0) 3. Cheng-Hsin Chuang, “LABEL FREE IMPEDANCE BIOSENSORS FOR POINT OF
CARE DIAGNOSTICS”, Point-of-Care Diagnostic Chapter 8, pp.171-199. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
技術報告 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. 莊承鑫,「研究以雷射輔助式奈米壓印技術對軟性觸覺感測器敏感度提升」,研究報告,工研院電子所,2005/12。 2. 莊承鑫,「低殘留應力之電容式麥克風設計研究」,研究報告,工研院電子所,2005/12。 3. 莊承鑫、羅森雄,「平板震動波傳遞行為之特性研究」,研究報告,工研院電子所,2006/12。 4. 莊承鑫、賴競堯,「微型化之高效率壓電式擴音器開發與研究」,研究報告,工研院南分院微系統科技中心,2007/12。 5. 莊承鑫、李文輝,「矽質麥克風封裝之熱應力分析報告」,研究報告,工研院南分院微系統科技中心,2007/12。 6. 莊承鑫、呂政泰,「指向揚聲與貼片行傳感器製作」,研究報告,工研院南分院微系統科技中心,2007/12。 7. 莊承鑫、黃景德,「樹根錨定之力學分析」,研究報告,樹花園股份有限公司,2012/12。
8. 莊承鑫,「陽極氧化鋁模版開發十三吋具次波長結構之抗反射膜」技術報告,典範科大計畫,2014/10。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
專利 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. 中華民國發明專利,發明名稱:具辨識黏膜下軟硬度之筆型口腔鏡,發明人:莊承鑫、薛宇翔、林祺茂,申請案號:OOOO,申請生效日期: 2017/04/01。 2. Patent, Invent Title: “綁帶型壓電可拉伸可撓式力量感測器” ,Inventor: 莊承鑫、黃中琳、王承安、張萬榮、蘇建平, Paten NO.:OOOOO, Date of Paten: OOOO.I283295 3. 中華民國發明專利,發明名稱:綁帶型壓電可拉伸可撓式力量感測器,發明人:莊承鑫、黃中琳、王承安、張萬榮、蘇建平,申請案號:OOOO,申請生效日期: 2017/04/01。 4. 中華人民共和國發明專利,發明名稱:綁帶型壓電可拉伸可撓式力量感測器,發明人:莊承鑫、黃中琳、王承安、張萬榮、蘇建平,申請案號:OOOO,申請生效日期: 2017/04/01。
5. 中華人民共和國發明專利,發明名稱:貼片式軟板電路暨壓電薄膜力量感測器,發明人:莊承鑫、黃中琳、王承安,申請案號:OOOO,申請生效日期:2017/04/01。 6. 中華民國發明專利,發明名稱:應用於生物檢測晶片之具三維流道紙基板感測器及其製造方法,發明人:莊承鑫、張凱傑、張龍右、吳熏培,核准編號:I569010,核准生效日期: 2017/02/01
7. Patent, Invent Title: “Apparatus for detecting tissue hardness of living body(應用於生物體內組織軟硬度感測裝置)” ,Inventor: 莊承鑫、黃汶晨、李讚修, Paten NO.:US9532743, Date of Paten: 2017/01/03.) 8. 中華人民共和國發明專利,發明名稱:用于???持力的超?波触??感器/用於偵測夾持力之超聲波觸覺感測器,發明人:莊承鑫、陳嘉文,申請案號:201611032542.2,申請生效日期:2016/11/15。
9. Patent, Invent Title: “Ultrasonic tactile sensor for detecting clamping force(用於偵測夾持力之超聲波觸覺感測器) ”,Inventor: 莊承鑫、陳嘉文,Paten NO.:15/288027,Date of Paten: 2016/10/07。
10. 中華民國發明專利,發明名稱:用於偵測夾持力之超聲波觸覺感測器,發明人:莊承鑫、陳嘉文,申請案號:105129705,申請生效日期:2016/09/13,核准生效日期2016/09/13。
11. 中華民國發明專利,發明名稱:熔接金屬線進給裝置,發明人:莊承鑫,江驊晟,申請案號:105204870,申請生效日期: 2016/04/08,證書號:M528223,核准生效日期2016/04/08。 12. 中華民國發明專利,發明名稱:可輸送保護氣體之送線裝置(有氣體),發明人:莊承鑫,江驊晟,申請案號:105203875,申請生效日期: 2016/03/21,證書號:M524840,核准生效日期2016/03/21。
13. 中華民國發明專利,發明名稱:送線機構(無氣體),發明人:莊承鑫,江驊晟,申請案號:105203874,申請生效日期: 2016/03/21,核准生效日期2016/03/21。
14. 中華民國發明專利,發明名稱:具可調式噴嘴之送線裝置,發明人:莊承鑫,江驊晟,申請案號:105108617,申請生效日期: 2016/03/21,核准生效日期2016/03/21。
15. 中華民國發明專利,發明名稱:運用壓電感測標籤之物流監控系統,發明人:莊承鑫, 李大輝, 張萬榮, 翁琬晴, 黃中琳,核准編號:I557680 ,核准生效日期: 20161007
16. 中華民國新型專利,發明名稱:應用於檢測生物組織軟硬度自動觸擊裝置,發明人:莊承鑫、李讚修,申請案號:105200177,申請生效日期: 2016/06/01,第M520033號,專利權期間:2016/04/11~ 2026/01/06。
17. 中華民國新型專利,發明名稱:應用於生物體內組織軟硬度感測裝置,新型第M497989號,核准生效日期: 2014/10/31,專利權期間:2015/04/01~ 2024/10/30。
18. US Patent, Invent Title: “Apparatus for detecting tissue hardness of living body”,Inventor: Cheng-Hsin Chuang, Paten NO.:14/534,767, Date of Paten: 2014/11/06.
19. 中華民國發明專利,發明名稱:應用於內視鏡附件之彈簧式擊發機構,申請案號:103137702,核准生效日期: 2014/10/31。
20. 日本新型專利,發明名稱:生物体?組織軟/硬度感知??用???置,發明人:莊承鑫、黃汶晨、李讚修,實用新案:3195705,專利權期間:2015/01/07~ 2024/11/16。
21. US Patents, Invent Title: Apparatus and methods for identifying a tissue inside a living body(感測生物體內組織的裝置與其方法),Inventor:莊承鑫、黃汶晨、李讚修,申請案號:13/116,092,證書號:US8876735B2,核准生效日期: 2014/11/04。
22. 中華民國新型專利,發明名稱:Apparatus for detecting tissue hardness of living body應用於生物體內組織軟硬度感測裝置,發明人:莊承鑫、黃汶晨、李讚修,申請案號:14/534,767,證書號:US9532743B2,核准生效日期: 2014/11/06。
23. US Patents,發明名稱:Spring type firing mechanism applied to endoscope accessory應用於內視鏡附件之彈簧式擊發機構,發明人:莊承鑫、黃汶晨、李讚修,申請案號:14/538,025,核准生效日期: 2014/11/11,證書號:U1234。
24. 中華民國發明專利,發明名稱:雷射輔助熱壓印方法,發明人:劉全璞、李永春、蕭飛賓、莊承鑫、邱正宇、陳俊宏,發明第I254367號,專利權期間:2006/05/01 - 2025/07/14。
25. 中華民國發明專利,發明名稱:壓電式碰觸感測器,發明人:謝佑聖、莊承鑫,發明第I283295號,專利權期間:2007/07/01 - 2026/03/20。
26. US Patent, Invent Title: “PIEZOELECTRIC TACTILE SENSOR”,Inventor: Cheng-Hsin Chuang, Paten NO.:US2010/0207490 A1, Date of Paten: Aug. 19, 2010.
27. 中華民國發明專利,發明名稱:具三維微結構之生物顆粒抓取器及其製造方法,發明人:莊承鑫、李永春、蕭飛賓,發明第I308131號,專利權期間:2009/04/01 - 2026/09/20。
28. 中華民國專利,發明名稱:具三層式電極的微圓洞陣列之生物微粒控制晶片及其製造方法,發明人:莊承鑫、徐佑銘、吳耀東,發明第I384554號,專利權期間:2013/02/01 - 2029/10/01。
29. US Patent, Invent Title: Chip with tri-layer electrode and micro-cavity arrays for control of bioparticle and manufacturing method (具三層式電極的微圓洞陣列之生物微粒控制晶片及其製造方法), Inventor: Cheng-Hsin Chuang, You-Ming Hsu, Yao-Tung Wu, Paten NO.:US8367018B2, Date of Paten: February 5, 2013,2009/12/07~ 2029/12/06。
30. 中華人民共和國發明專利,發明名稱:微型揚聲器及其製造方法,發明人:莊承鑫、李新立、王欽宏、賴敬堯,發明第1088463號,2012/11/28 - 2028/12/30。
31. 中華民國發明專利,發明名稱:壓電式觸覺感測器及其製造方法,發明人:莊承鑫,發明第I396835號,專利權期間:2013/05/21 - 2028/10/15。
32. 中華民國專利,發明名稱:微型揚聲器及其製造方法,發明人:莊承鑫、李新立、王欽宏、賴敬堯,發明第I381747號,專利權期間:2013/01/01 - 2028/12/16。
33. US Patent, Invent title: Substrate with a microstructure and method for producing the same, Cheng-Hsin Chuang, Ming-Yu Chen, Paten NO.: US9132574B2, Date of Paten: 2015/09/15~2033/03/03。
34. 中華民國專利,發明名稱:微粒搖篩機,發明人:莊承鑫、陳毓良,發明第I389745號,專利權期間:2013/03/21 - 2029/09/30。
35. US Patents, Invent title: Pneumatic nozzle for roller coating, Inventor: Cheng-Hsin Chuang, Deng-Maw LU, Hsing-sheng Wu, Paten NO.:US8312833B2, Date of Paten: 2009/12/10~2029/12/09。
36. US Patent, “Flexible Piezoelectric Tactile Sensor 軟性壓電式觸覺感測器”,Inventor: Cheng-Hsin Chuang, Yi-Rong Liou, Paten NO.:US8421311B2, Date of Paten: 2013/04/16 ~ 2030/04/29。
37. US Patent, Invent title: Micro-speaker and manufacturing method there of, Hsin-Li Lee, Chin-Horng Wang, Cheng-Hsin Chuang, Jin-Yao Lai, Paten NO.:US8,218,797,B2, Date of Paten: 2012/07/10~ 2029/04/27。
38. 中華民國發明專利,發明名稱:壓電式平面揚聲器及其製造方法,發明人:莊承鑫、賴炯憲,核准編號:I571137,核准生效日期: 2017/02/11。
39. 中華民國發明專利,發明名稱:量測物體之材料性質的感測裝置與其方法,發明人:莊承鑫、劉一融,發明專利第I431272號,專利權期間:2014/03/21 - 2031/05/26。
40. 中華民國專利,發明名稱:氣壓式噴嘴滾筒旋佈裝置,發明人:莊承鑫、盧燈茂、吳幸昇,發明專利第I441690號,專利權期間:2014/06/21 - 2029/09/30。
41. US Patent, Invent title: PIEZOELECTRIC TACTILE SENSOR(structure), Cheng-Hsin Chuang, Paten NO:US 7,781,940 B1, Date of Paten: 2009/02/13 Date of Paten: 2010/08/24~ 2029/02/12。
42. US Patent, Invent title: PIEZOELECTRIC TACTILE SENSOR(method patent), Cheng-Hsin Chuang, Paten NO:US8158533B2, Date of Paten: 2012/04/17~ 2030/06/30。
43. 中華民國發明專利,發明名稱:軟性壓電式觸覺感測器,發明人:莊承鑫、劉一融,發明專利第I444604號,專利權期間:2014/07/11 - 2030/04/13。
44. 中華民國發明專利,發明名稱:具微結構之基材及其製作方法,發明人:莊承鑫、陳茗毓,生效案號:2016/3/1,申請案號:101116432,證書字號:I523809。
45. 中華民國發明專利,發明名稱:多孔性氧化鋁模板之製作裝置,發明人:莊承鑫、沈佑民、王聖璋、蔡嵩玟,證書字號:I465301。
46. US Patents, invent title: PREPARATION APPARATUS FOR POROUS ALUMINA TEMPLATE, Inventor: Cheng-Hsin Chuang,申請案號:14/035,122。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
研究計畫 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
政府機關所補助之專題研究計畫: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
產學計畫: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
服務 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
碩士口試委員: 1. 105學年度中山大學機械與機電工程學系碩士學位考試委員 2. 105學年度國立成功大學-機械所碩士班口試委員 3. 103學年度國立臺南大學機電系統工程所擔任課程規畫委員 4. 103學年度國立中山大學/機械與電機工程學系擔任學位考試委員 5. 103學年度國立高雄應用科技大學/模具工程系與機械系擔任學位考試委員 6. 103學年度國立中山大學擔任機械與電機工程學系碩士班學位口試委員 7. 103學年度國立中正大學擔任機械工程系博士班學位考試委員 8. 103學年度國立成功大學擔任醫學工程學系碩士班學位口試委員 9. 103學年度國立成功大學/機械工程系碩士學位考試委員 10. 103學年度國立成功大學研究總中心擔任顧問委員 11. 102學年度擔任國立高雄應用科技大學102年模具工程系碩士口試委員 12. 102學年度擔任國立成功大學102年機械工程學系碩士口試委員 13. 100學年度擔任國立成功大學101年機械工程學系碩士口試委員 14. 100學年度擔任國立高雄應用科技大學之碩士考試委員會委員 15. 100學年度擔任國立成功大學機械工程學系博士學位考試委員 16. 100學年度擔任國立成功大學奈米科技暨微系統工程研究所碩士學位考試委員會委員 17. 100學年度擔任國立成功大學機械工程學系碩士學位考試委員 18. 100學年度擔任國立成功大學機械工程學系博士學位考試委員 19. 100學年度南台科技大學研究所推甄入學招生書審暨面試委員 20. 100學年度南台科技大學研究所推甄入學書面審查委員 21. 100學年度南台科技大學研究所考試入學招生命題委員 22. 100學年度南台科技大學四技二專推薦甄選入學書審委員 23. 100學年度南台科技大學四技二專甄選委員會 24. 100學年度南台科技大學四技二專優入學書面審查委員 25. 99學年度南台科技大學研究所推甄入學招生書審暨面試委員 26. 99學年度國立成功大學醫工所博士班口試委員 27. 99學年度國立成功大學機械工程系碩士考試口試委員 28. 99學年度國立成功大學光電所碩士碩士考試口試委員 29. 99學年度國立中山大學電機系博士班口試委員 30. 99學年度國立成功大學航空太空工程碩士碩士考試口試委員 31. 99學年度國立成功大學機械工程學系碩士學位考試委員會委員 32. 99學年度國立成功大學土木系碩士考試委員會委員 33. 98學年度國立成功大學土木系碩士考試口試委員 34. 97學年度國立成功大學土木工程研究所碩士學位口試委員 35. 95學年度國立成功大學機械工程研究所碩士學位考試委員 36. 95學年度建國科技大學自動化工程系暨機電光系統研究所碩士論文口試委員 37. 94學年度國立成功大學微機電系統工程研究所碩士學位考試委員
計畫審查委員: 1. 97年擔任國家晶片系統設計中心晶片製作審查委員,負責CMOS MEMS計畫審查 2. 2009-2010年擔任國家晶片系統設計中心晶片製作之審查委員,負責CMOS MEMS計畫審查。 3. 2010年擔任國科會初審計畫申請案之審查委員 4. 2010年擔任行政院國家科學委員會工程處計畫申請案之審查委員 5. 2010年擔任國家實驗研究院擔任成果發表會第二階段初審評審委員 6. 2010年度擔任國家實驗研究院之晶片製作成果發表會評審委員 7. 2010-2013年擔任國家實驗研究院擔任書面評審委員 8. 2013年度晶片製作審查會議及書面評審委員評審前瞻性晶片之審查委員 9. 2014年擔任微系統暨奈米科技協會審查委員 10. 2014年擔任國家實驗研究院晶片系統設計中心審查委員 11. 2014年財團法人金屬工業研究發展中心擔任公民營機構顧問或委員 12. 2016年擔任科技部工程司「應用型產學合作計畫-自動化學門」複審委員
校外授課: 1. 2009年02月受邀至中國北京大學第三屆微奈前沿技術暑期課程講師。 2. 94~97學年度國立成功大學奈米工程暨微系統研究所,微機電元件實作班課程講師,負責體型微細加工技術實作課程。 3. 95~97學年度國立成功大學醫學院,醫衛分子檢驗學分班:「單細胞生物晶片的原理、製作與應用」課程講師。 4. 97學年度受邀至日本熊本大學短期講學,開設1學分英語授課,課程名稱「MEMS Technology」 5. 2012年中華民國南部科學園區產學協會光電相關研究中心成果推廣發表會授課講師 6. 2013-2016年日本熊本大學短期授課講師 |